LeghornGroup Pvt Ltd - Cables And Wire Accessories

Description

• Thin wire of 0.6 mm suitable to enter into small holes.
• Wire length can be variable.
• Serial number laser marked on both body and plunge increase security levels.
• Barcode should be possible.
• Wire attached to seal hence easy to handle.No pliers or tools required to close the sew.
• Possible to use a fragile wire made of MS or Plastic for easy break off for Airlines and Fire extinguishers.
• Possible to use a strong wire of SS in applications where more strength is required.
• Transparent body to enable visibility of any tampering.

These cable seals can be adjusted by inserting the steel cable in the holes and then pulling on it. In order to prevent against any attempt of tampering, it is advisable to pull the cable down as far as possible. The length of the cable can be made to order.

SEQUENTIAL NUMBERING AND CUSTOMISATION– LASER PRINTING– Sequenced numbering up to 15 digits– Also alphanumeric– Bar-code possibility– Customised up to 20 characters on one line– Logos available upon request

Cable seals are metal adjustable seals and as such they are extremely versatile and can be used in a wide set of different applications.

CABLE SEAL 4×250 mm has the body completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

Specifically CABLE SEAL 4×250 mm is suitable to meet security requirements in container shipping or rail transport.

This is a High Security Seal compliant with requirements impose by ISO 17712:2013.

SEQUENTIAL NUMBERING AND CUSTOMISATION– LASER PRINTING– Sequenced numbering up to 15 digits– Also alphanumeric– Bar-code possibility– Customised up to 20 characters on one line– Logos available upon request

CABLESEAL with 3, 5 mm of cable diameter is the best trade-off between security degree and versatility of usage.

It is an adjustable seal and can be used in many different conditions, in particular in any application to protect cargos during shipping and intermodal freight.

CABLESEAL 3, 5×250 mm has the body completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

This is a High Security Seal compliant with requirements impose by ISO 17712:2013.

• Description
• Certificates

CABLESEAL with diameter 1, 5 mm is a versatile metal security seal that can be used in a large variety of applications.

It is particularly suitable to control counter meters of electricity, water and gas.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

SEQUENTIAL NUMBERING AND CUSTOMISATION– LASER PRINTING– Sequenced numbering up to 15 digits– Also alphanumeric– Bar-code possibility– Customised up to 20 characters on one line– Logos available upon request

Security seal, one of the most commonly used.

With its cable diameter of 1mm, it can be used in any locking situation. Particularly suitable to control counter meters of electricity, water and gas.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

SEQUENTIAL NUMBERING AND CUSTOMISATION– LASER PRINTING– Sequenced numbering up to 15 digits– Also alphanumeric– Bar-code possibility– Customised up to 20 characters on one line– Logos available upon request

Very flexible metal security cable seal. It is an adjustable seal and be used in many different conditions.

It is particularly suitable to lock trucks and oil tankers in transports.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

SEQUENTIAL NUMBERING AND CUSTOMISATION– LASER PRINTING– Sequenced numbering up to 15 digits– Also alphanumeric– Bar-code possibility– Customised up to 20 characters on one line– Logos available upon request

• Description
• Certificates

Very flexible metal security cable seal. It is an adjustable seal and be used in many different conditions.

It is particularly suitable to lock valves in the industry sector or trucks and oil tankers in transports.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

SEQUENTIAL NUMBERING AND CUSTOMISATION– LASER PRINTING– Sequenced numbering up to 15 digits– Also alphanumeric– Bar-code possibility– Customised up to 20 characters on one line– Logos available upon request