Our Products
POWER-FLEX® CAT 5e / 6 UTP Cables are used in rapidly modernising computer networks. They form the core of data transmission in huge software complexes, industries and multistoried buildings. The high performance cables are suitable for transmission of voice, video and data. The cable meets the requirements of EIA/TIA 568-B-1/B-2.
PAIRS: Two insulated conductors are twisted together properly to minimize crosstalk. The four pairs are laid up together with suitable lay length.
COLOUR CODE:
Submersible Pump Flat Cables play a very important role in the working of Submersible motors. They work under extreme stress conditions and perform consistently over long periods of time. Even under fluctuating voltage conditions the cable has to perform without major hiccups.
CONDUCTOR:POWER-FLEX® Submersible wiring cables are manufactured using Electrolytic Grade 99.97% purity copper with more than 100% conductivity. The high purity & conductivity ensures superior working of the wires throughout their life. The conductor is drawn from bright electrolytic grade copper and annealed copper are bunched tightly together in heavy duty high speed bunchers in circular construction to get perfect concentric shape without any loose strands.
INSULATION:The bunched conductors are insulated with specially formulated PVC compounds. The compound is resistant to moisture, oil, alkali and grease and has high insulation and dielectric values. The insulation is carried out on state-of-the-art high speed double extrusion lines with self centering cross head. Automatic diameter controllers ensures precision centering and perfect concentric insulation. The high quality tooling ensures smooth insulation.
Online spark testers ensure fail proof high voltage test by employing non destructive form of testing at six times the rated voltage.
SHEATH:The cores are laid down in flat parallel formation and the outer sheath of the cable is extruded from special grade PVC with superior abrasion resistance imperious to water, grease, oil etc.
Description :
CONDUCTOR:POWER-FLEX® Shielded cables are manufactured using Electrolytic Grade 99.97% purity copper with more than 100% conductivity. The conductors drawn and bunched according to class 2 or class5 of IS:8130/1984.
INSULATION:The bunched conductors are insulated with specially formulated PVC compound. The compound confirms to IS:5831 Type A
Online spark testers ensure fail proof high voltage test by employing non destructive form of testing at six times the rated voltage.
SCREEN:The insulated cores are laid up and shielded with polyester tape, overall screened with aluminium mylar tape, metallic side down in contact with tinned copper drain wire of size 0.5 mm for reinforcement, then overall shielded with polyester tape.
SHEATH:The shielded cable is overall sheathed with PVC Type ST1 of IS:5831.
OPTIONS:
The most acceptable metals for conductors are copper and aluminium due to their higher conductivity and ductility.
As copper has got higher affinity for sulphur, it corrodes in the atmosphere where sulphur fumes are present. In these conditions tinned copper should be used. Aluminium oxide film which is always present on Aluminium conductor surface acts as barrier and it protects the Aluminium conductor from corrosion in fumes laden atmosphere.
Polycab Special 3 Core Flat Cables are manufactured for critical space requirement, protection against indefinite immersion in water under specified conditions, protection against rain-water and against ingress of small solid foreign bodies.
Polycab Special 3 Core Flat Cables are produced form best quality electrolytic copper, which is drawn, annealed on-line and bunched on automatic machines to ensure flexibility and uniform resistance. The conductors are insulated with a special grade of PVC on sophisticated co-extrusion lines. Outer sheath consists of highly abrasion resistant PVC compound impervious to grease, oil and water etc.
Relay Based Instrumentation Panel
As per Requirement Machine Monitoring Control Panel Based On Bently 1900 / bently 3500 and Shinkawa System Instalation in Control Room or Purge Panel. Mainly for Compressor Control and Main Line Pump Application.
XLPE insulated heavy duty cables were introduced worldwide in mid sixties. These cables have overcome the limitations of PVC Insulated Cables such as thermal degradation, poor moisture resistance and thermoplastic nature.
Technical Advantages:
Commercial Advantages:
POWER-FLEX® Telephone and Switch Board Cables are widely used for high clarity communication in offices, factories, IT/ITES companies, hotels, hospitals, group housing projects, educational institutions, high rise commercial and residential buildings etc.
POWER-FLEX® Telephone and Switch Board Cables are made of high conductivity electrolytic grade annealed bare copper conductor with nominal diameter of 0.4 mm and 0.5 mm. Special grade PVC as per IS:13176 (1991) type 2 is used for insulating with proper colour codes.The insulated cores are twisted together with suitable lay to form a pair. The pairs are bunched together to form pairs in such a way to avoid any cross talk.
The bunched pairs are then overall wrapped with polyester tape and sheathed with gray colour FRPVC compound with high oxygen index and is also provided with nylon rip cord. POWER-FLEX® Telephone and Switch Board Cables are manufactured as per ITD-S/WS 113C & 114C specifications.
Online spark testers ensure fail proof high voltage test by employing non destructive form of testing at twice the rated voltage.
POWER-FLEX® Automobile cables are manufactured using Electrolytic Grade 99.97% purity copper with 100% conductivity. The high purity & conductivity ensures superior working of the wires throughout their life. The conductor is drawn from bright electrolytic grade copper and annealed copper are bunched tightly together in heavy duty high speed bunchers in circular construction to get perfect concentric shape without any loose strands.
These cables are insulated with a special grade high temperature PVC compound which is impervious to water, oil, grease, acids etc.
These cables can operate under extreme climatic conditions i.e., from -30°C to 105°C.
These cables are manufactured as per IS 2465 standard.
CONDUCTOR:POWER-FLEX® Co-Axial cables are manufactured using Electrolytic Grade 99.97% purity copper which ensures high quality signal transmission.
SCREEN:Aluminium Mylar tape is provided over the insulated conductor to shield the conductor and to ensure disturbance free transmission of signals.
CONDUCTOR:POWER-FLEX® Screened cables are manufactured using Electrolytic Grade 99.97% purity copper with more than 100% conductivity. The conductors drawn and bunched according to class 2 or class5 of IS:8130/1984.
INSULATION:The bunched conductors are insulated with specially formulated PVC compound. The compound confirms to IS:5831 Type A
Online spark testers ensure fail proof high voltage test by employing non destructive form of testing at six times the rated voltage.
SCREEN:The insulated cores are laid up and shielded with polyester tape, overall braided with annealed tinned copper with minimum 65% however generally 85% coverage. Overall shielded with polyester tape.
SHEATH:The screened cable is overall sheathed with PVC Type ST1 of IS:5831.
OPTIONS:
CONDUCTOR:POWER-FLEX® Multi Core Flexible Cables are manufactured using Electrolytic Grade 99.97% purity copper with more than 100% conductivity. The conductors drawn and bunched according to class 2 or class5 of IS:8130/1984.
INSULATION:The bunched conductors are insulated with specially formulated FR-PVC compound with high oxygen index and temperature index which helps in restricting propagation of flame. The compound confirms to IS:5831 Type A
Online spark testers ensure fail proof high voltage test by employing non destructive form of testing at six times the rated voltage.
SHEATH:In Multi Core Flexible Cables the insulated cores are assembled to form concentric shape. Inner cores are colour coded for easy identification as per National/International colour coding practices. The sheathing is carried out on Highspeed extruders with specially formulated PVC compounds with additional FR properties and they withstand mechanical abrasion in use as well as provide ease of stripping. The FR PVC compounds used for insulation & sheath have high Oxygen & temperature index helping in restricting the spread of flame even at high temp.
Normally the outer sheath for multi core cables will be Black in colour however POWER-FLEX® multi core cables are also available with White/Grey outer sheath as well. These outer sheath colours help in facilitating in cabling for UPS in establishments with large number of computer networks.
POWER-FLEX® Automobile cables are manufactured using Electrolytic Grade 99.97% purity copper with 100% conductivity. The high purity & conductivity ensures superior working of the wires throughout their life. The conductor is drawn from bright electrolytic grade copper and annealed copper are bunched tightly together in heavy duty high speed bunchers in circular construction to get perfect concentric shape without any loose strands.
These cables are insulated with a special grade high temperature PVC compound which is impervious to water, oil, grease, acids etc.
These cables can operate under extreme climatic conditions i.e., from -30°C to 105°C.
These cables are manufactured as per IS 2465 standard.
Armoured cable is the name given to any electrical cable constructed with a layer of aluminium wire armour or steal wire armour. The armour sits below the sheath of the cable to provide protection for the conductor and insulating layers. When electrical cable is required for outside use or in direct burial projects, it must have mechanical protection. Aluminium wire armour or AWA, and steel wire armour or SWA provide such protection as well as enabling the cable to withstand higher pulling loads.
AWA and SWA are used in the power cables.
SWASteel Wire/strip Armoured Cable or SWA Cable is a hard-wearing mains electricity cable with class 2 stranded copper conductors, XLPE (Cross-Linked Polyethylene) insulation, PVC (Polyvinyl Chloride) bedding, aluminium or steel wire armour and a black PVC sheath. The voltage rating of an SWA Cable is 600/1000V.
AWAAluminium Wire/strip Armoured Cable or AWA Cable is a hard-wearing mains electricity cable with class 2 stranded Aluminium conductors, XLPE (Cross-Linked Polyethylene) insulation, PVC (Polyvinyl Chloride) bedding, aluminium or steel wire armour and a black PVC sheath. The voltage rating of an SWA Cable is 600/1000V.
Applications:Armoured cables used in everything from transmission, power and distribution networks and the renewable energy sector to the oil, gas and petrochemical, water treatment, transport industries, underground, outdoor & indoor applications.
Standards:
Armouring:
Temperature Rating:
Minimum Bending Radius:
Additional Information:
Payment Terms :
Delivery Time : IMMEDIATE