Write a Review
Our Products
We offer the best product range of Flat Bed CNC Lathe and Slant Bed CNC Lathe.
FEATURES: - FANUC Oi MATE CNC CONTROL- CONSTRUCTION CASTING MOLDED WITH RESIN SAND OF BED, HEADSTOCK, SADDLE PLINTH etc.- TURCITE-B COATED ON, MAKING SURFACES BETWEEN SADDLE AND GUIDEWAYS.- PRECISION BALLSCREW, HIGH RIGIDITY PRECISION COMPOUND BEARING ENSURE ACCURATE POSITIONING &EFFICIENT DRIVING. CENTRALIZED OIL LUBRICATOR PROVIDING FORCED AUTO. LUBRICATION ONTO BALLSCREW, MATING SURFACES.- HIGH SPINDLE SPEED WITH WIDE VARIABLE SPEED RANGES. LOW NOISE UNDER 80db. CKE-Z SERIES MACHINE ADOPTING THE SMART AUTOMATIC GEAR CHANGING MECHANISM ENABLES AUOTMATIC SPEED CHANGES AMONG LOW, MEDIUM, HIGH SPEED RANGES WITHOUT TURNING OFF THE MACHINE. CKE-i SERIES WITH INDEPENDENT SPINDLE STRUCTURE AND FREQUENCY CONVERTED MOTOR OR SERVO MOTOR ENABLES HIGH SPINDLE SPEED AND STEPLESS SPINDLE CHANGING- FLEXIBLE CONTROL PANEL ENABLES CONVENIENT TOOL SETTING.- POPULAR FULL ENCLOSED GUARDS WITH INTERLOCK OFFER A WATERPROOF AND CHIP-FREE ENVIRONMENT. NON-LIFTING TOOLPOST WITH INTERNAL COOLANT CHANNELS GUARANTEES QUALITY SURFACES OF MACHINED PARTS AND AVOID COOLANT SPLASHING.- VERTICAL 4-p TOOLPOST, VERTICAL 6-p TOOLPOST, HORIZONTAL 6-p TOOLPOST, QUICK CHANGE TOOLPOST, ETC ARE AVAILABLE FOR YOUR SELECTION.- OPTIONAL, PNEUMATIC, HYDRAULIC CHUCK AND TAILSTOCK ARE AVAILABLE.- FANUC, SIEMENS, FAGOR, etc CONTROL SYSTEMS CAN BE APPOINTED. E-HANDWHEEL FUNCTION CAN ALSO BE EQUIPPED.
| Model | CKE6130i | CKE6136Z | CKE6136i | CKE6140Z | CKE6140i | CKE6146Z | |
| Max. Swing over bed | MM | 300 | 360 | 360 | 400 | 400 | 460 |
| Width of bed | MM | 205 | 300 | 300 | 300 | 300 | 300 |
| Max. Length of work piece | MM | 600 | 750/1000 | 750/1000 | 750/1000 | 750/1000 | 750/1000/ 1500 |
| Max. Swing over slide | MM | 145 | 180 | 180 | 200 | 200 | 275 |
| X Travel | MM | 175 | 205 | 205 | 225 | 225 | 270 |
| Z Travel | MM | 505 | 620/870 | 620/870 | 620/870 | 620/870 | 620/930/ 1430 |
| Spindle nose | MM | A2-5 | A2-6/D6 | A2-5 | A2-6/D6 | A2-5 | D8 |
| Chuck Size | MM | 165 | 200 | 165 | 200 | 165 | 250 |
| Taper of spindle bore | MM | M5 | M6 | M5 | M6 | M5 | 01:20 |
| Spindle bore | MM | 40 | 52 | 40 | 52 | 40 | 74 |
| Spindle Speed- Frequency conversion motor | R/MIN | 40-4000 | 20-650 75-2500 | 200-3500 | 20-650 75-2500 | 200-3500 | |
| Spindle Speed- Servo motor | R/MIN | 5.5-135/ 16-800/ 50-2500 | |||||
| Steps of Spindle speed | Stepless | 2-Step actuator | Stepless | 2-Step actuator | Stepless | 3-Step actuator | |
| Frequency conversion motor power | KW | 4 | 5.5 | 5.5 | 5.5 | 5.5 | |
| Servo motor power | KW | 5.5/7.7 | |||||
| X/Z Rapid traveres X/Z | M/MIN | 04-May | 04-May | 04-May | 04-May | 04-May | 05-Jul |
| Repeatability of toolpost | MM | 0.008 | 0.008 | 0.008 | 0.008 | 0.008 | 0.008 |
| Vertical 4-position Tool post Changing time | S | 2.1 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 |
| Horizontal 6-position Tool post changing time | S | 3 | 3 | 3 | 3 | 3 | |
| Diameter of tailstock quil | MM | 42 | 63 | 63 | 63 | 63 | 63 |
| Travelof tailstock quill | MM | 110 | 130 | 130 | 130 | 130 | 150 |
| Taper of tailstock quill | M3 | M4 | M4 | M4 | M4 | M4 | |
FEATURES:- CNC SLANT BED LATHES WITH RIGID CAST-IRON STRUCTRE HARDENED(50-52HRC) AND GROUND GUARANTEE HIGH PRECISION AND STABILITY.- THE MACHINE BED IS MADE OF HEAT STABILISED CAST-IRON.- VARIOUS CONFIGURATION ARE AVAILABLE WITH SINDLES FROM ASA 5" TO ASA 15", POWER UP TO 30KW AND TUMING LENGTH UP TO 3000MM- A WIDE RANGE OF OPTIONS AND ACCESSORIES ALLOW THE MACHINE TO BE HIGHLY CUSTOMISED FOR VERY ACCURATE AND RELIABLE MACHINING.
| MODEL | CL15-250 | CL15-330 | CL15-250i | CL20 | CL20i |
| CAPACITY: | |||||
| Max. swing over bed(mm) | 400 | 400 | 400 | 440 | 440 |
| Max. turning length (mm) | 250 | 330 | 250 | 500 | 500 |
| Max.turning dia (various shafts)mm | 160 | 160 | 160 | 300 | 300 |
| Max. turning dia (discs)(mm) | 200 | 200 | 200 | 300 | 300 |
| SPINDLE: | |||||
| Spindle nose | ISO A2-5 | ISO A2-5 | ISO A2-6 | ISO A2-6 | ISO A2-8 |
| Spindle speed(r/min) | 50-5000 | 50-5000 | 45-5000 | 45-4500 | 35-3500 |
| Main spindle motor power(kw) | 5.5/7.5 | 5.5/7.5 | 5.5/7.5 | Nov-2015 | Nov-2015 |
| Dia.of spindle through hole(mm) | 46 | 46 | 62 | 62 | 57 |
| Max.Bar dia | 32 | 32 | 52 | 52 | 75 |
| Min. resolution | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| TRAVER AND FEED: | |||||
| X/Z axis traver(mm) | 120/260/330 | 120/260/330 | 120/260 | 165/510 | 165/510 |
| Rapid traverse X and Z(m/min) | 15/18 | 15/18 | 15/18 | 16/20 | 16/20 |
| Cutting feed X &Z axis(mm/min) | 0-5000 | 0-5000 | 0-5000 | 0-5000 | 0-5000 |
| X/Z servo motor torque(NM) | 08-Aug | 08-Aug | 08-Aug | 08-Dec | 08-Dec |
| Positioning precision of X/Z axis | 0.016/0.020 | 0.016/0.020 | 0.016/0.020 | 0.016/0.020 | 0.016/ 0.020 |
| Repetitive posioning precision of X/Zaxis | 0.007/0.008 | 0.007/0.008 | 0.007/0.008 | 0.007/0.008 | 0.007/0.008 |
| Differential of forward to reverse | 0.006/0.010 | 0.006/0.010 | 0.006/0.010 | 0.006/0.010 | 0.006 /0.010 |
| TURRET | |||||
| Turret type/No.of Station | 8 | 8 | 8 | 8 | 8 |
| Tool shank size(mm) | 20x20 | 20x20 | 20x20 | 25x25 | 25x25 |
| Indexing time(one step/full step)(s) | 0.3/1.2 | 0.3/1.2 | 0.3/1.2 | 0.3/1.3 | 0.3/1.3 |
| TAIL STOCK: | |||||
| Quill dia(mm) | 60 | 60 | 60 | 80 | 80 |
| Quill travel(mm) | 80 | 80 | 80 | 130 | 130 |
| Spindle taper | MT3 | MT3 | MT3 | MT4 | MT4 |
| Max.tail stock travel(mm) | 215 | 215 | 215 | 460 | 460 |
| OTHER: | |||||
| NC System | Fanuc OiT | Fanuc OiT | Fanuc OiT | Fanuc OiT | Fanuc OiT |
| Incling angle of bed guideway to horz. | 60deg | 60deg | 60deg | 45deg | 45deg |
| Guideway of saddle side | Linear way | Linear way | Linear way | Linear way | Linear way |
| MACHINE SIZE: | |||||
| M/c Length | 2085x1555x1880 | 2085x1555x1880 | 2350x1555x1880 | 2760x1495x1710 | 2760x1495x1710 |
| Net Wg(kg) | 2700 | 2700 | 2900 | 4800 | 4800 |
| Gr Wg.(kg) | 3200 | 3200 | 3400 | 5300 | 5300 |
NEHAL SHAH (Machine Tools Traders (Madras))
Kalyani House 91, Armenian Street, George Town, Chennai, Tamil Nadu - 600001, India
Share us via
