Titanium Grades:-Manhar Metal Supply Corporation Supplies Titanium In Different Grades. We Have Titanium Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, And Grade 12.

Titanium And Its Alloys Have Proven To Be Technically Superior And Cost-Effective Materials Of Construction For A Wide Variety Of Aerospace, Industrial, Surgical Implants, Gold Refinery , Anodising Plants , Heater For Industrial Use , Marine And Commercial Applications. In North America, Approximately 70% Of The Titanium Consumed Is Utilized For Aerospace Applications.Due To The Expansion Of Existing Applications And The Development Of New Uses, The Greatest Growth Will Occur In The Industrial, Marine And Commercial Sectors

Titanium is as strong as steel but much less density. It is therefore important as an alloying agent with many metals including aluminium, molybdenum and iron. These alloys are mainly used in aircraft, spacecraft and missiles because of their low density and ability to withstand extremes of temperature. They are also used in golf clubs, laptops, bicycles and crutches.

Power plant condensers use titanium pipes because of their resistance to corrosion. Because titanium has excellent resistance to corrosion in seawater, it is used in desalination plants and to protect the hulls of ships, submarines and other structures exposed to seawater.

Titanium metal connects well with bone, so it has found surgical applications such as in joint replacements (especially hip joints) and tooth implants.

The largest use of titanium is in the form of titanium(IV) oxide. It is extensively used as a pigment in house paint, artists paint, plastics, enamels and paper. It is a bright white pigment with excellent covering power. It is also a good reflector of infrared radiation and so is used in solar observatories where heat causes poor visibility.

Titanium (IV) oxide is used in sunscreens because it prevents UV light from reaching the skin. Nanoparticles of titanium (IV) oxide appear invisible when applied to the skin.

The Properties And Characteristics Of Titanium Which Are Important To Design Engineers In A Broad Spectrum Of Industries Are:

Excellent Corrosion Resistance:Titanium Is Immune To Corrosive Attack By Salt Water Or Marine Atmosphere. It Also Exhibits Exceptional Resistance To A Broad Range Of Acids , Alkalis, Natural Waters And Industrial Chemicals.

Superior Erosion Resistance:Titanium Offers Superior Resistance To Corrosion, Cavitation Or Impingemnet Aatack. Titanium Is Atleast 20 Times More Erosion Resistance Than Copper Nickel Alloys

High Heat Transfer Efficiency:UnderIn Service Conditions, The Heat Transfer Properties Of Titanium Approximate Those Of Admirately Brass And Copper Nickel.There Are Several Reasons For This: 1) Titaniums Higher Strength Permits The Use For Thinner Walled Equipment. 2) There Appears To Be Unusual And Benefical Characteristics In Titaniums Inherent Oxide Film. 3) The Relative Absence Of Corrosion In Media Where Titanium Is Generally Used Leaves The Surface Bright And Smooth For Improved Lamellar Flow. 4) Titanuims Excellent Erosion-Corrosion Resistance Permits Significantly Higher Operating Velocities.

Superior Strength to weight Ratios

The Densities Of Titanium-Based Alloys Range Between 160 Lb/In3(4.43gm/Cm3) And 175lb/In3(4.85 Gm/Cm3).Yield Strengths Range From 25, 000 Psi(172 Mpa )Commercially Pure(Cp) Grade 1 To Above 200, 000 Psi (1380 Mpa) For Heat Threated Beta Alloys.The Combination Of High Strength And Low Density Results In Exceptionally Favorable Strength-To-Weigth Ratios For Titanium Based Alloys.These Ratios For Titanium Based Alloys Are Superior To Almost All Other Metals And Become Important In Such Diverse Applications As Deepwell Tube Strings In The Petroleum Industry And Surgical Implants In The Medical Field.

Special Information For Fraction of Titanium

Keeps tools Sharp

Titanium Has A Tendency To Gall, And Its Chips Can Weld To The Cutting Edged Of The Tool. This Is Particularly So Once Tool Wear Begins.Sharp Tools Should E Employed At All Times And Should Be Replaced Before They Dull. The Feed Should Not Be Stopped While The Tool And Work Piece Are In Moving Contact.

Grinding Of Titanium

In Grinding, The Difference Between Titanium And Other Metals Is The Activity Of Titanium At High Temperatures.At The Localized Points Of Wheel Contact Titanium Can React Chemically With The Wheel Material.The Most Important Facts To Consider In Order To Prevent This And Ensure Successful Grinding.

Joining Of Titanium

Titanium And Titanium Alloys Can Be Readily Joined By Normal Mechanical Fastener Techniques.With The Exception Of Brazing And Friction Welding, These Methods Are The Only Satisfactory Means Of Making Joints Between Two Nonweldable Titanium Alloys Or Between Titanium And Dissimilar Materials.

Hints For making Titanium

Titanium Can Be Fabricated Using Techniques Which Are No More Difficult Than Those Used To Machine Type 316 Stainless Steel.Commercially Pure Grades Of Titanium With Tensile Strengths Of 35, 000 To 80, 000 Psi Machine Fabricate For Easier Than The Aircraft I.E. 6al-4v With Tensile Strenghts Up To 200, 000 Psi.

Welding Titanium

In General, Welding Of Titanium And Its Alloys Can Be Readily Performed, But It Is Necessary To Exclusive Reactive Gases, Including Oxygen And Nitrogen From The Air, And To Maintain Cleanliness.Thus Weld Properties Are Heavily Influenced By Welding Procedured, Especially By The Adequacy Of Insert Gas Shielding.

Fire Prevension

Storage Of Coarse Titanium Turnings And Chips Is Relatively Safe. Storage Or Accumulation Of Titanium Fines Constitues A Fire Hazard.Clean Machines And Good Workshop Practice Are Usually Sufficient To Avoid Any Danger Of Fire When Machining Titanium.

Application

Titanium Is Used In Steel As An Alloying Element (Ferro) To Reduce Grain Size And As A Deoxidizer, And In Stainless Steel To Reduce Carbon Content. Titanium Is Often Alloyed With Aluminium (To Refine Grain Size), Vanadium, Copper (To Harden), Iron, Manganese, Molybdenum, And With Other Metals. Applications For Titanium Mill Products (Sheet, Plate, Bar, Wire, Forgings, Castings) Can Be Found In Industrial, Aerospace, Recreational, And Emerging Markets. Powdered Titanium Is Used In Pyrotechnics As A Source Of Bright-Burning Particles.

Industrial

Welded Titanium Pipe And Process Equipment (Heat Exchangers, Tanks, Process Vessels, Valves) Are Used In The Chemical And Petrochemical Industries Primarily For Corrosion Resistance. Specific Alloys Are Used In Down Hole And Nickel Hydrometallurgy Applications Due To Their High Strength (E. G.: Titanium Beta C Alloy), Corrosion Resistance, Or Combination Of Both. The Pulp And Paper Industry Uses Titanium In Process Equipment Exposed To Corrosive Media Such As Sodium Hypochlorite Or Wet Chlorine Gas .Other Applications Include: Ultrasonic Welding Wave , Wave Soldering, And Sputtering Targets. Titanium tetrachloride a colorless liquid, is important as an intermediate in the process of making and is also used to produce the Ziegler-Natta catalyst.

Beryllium Copper C17200 / Beryllium Copper Alloy 25

European Standards:CuBe2, DIN 2.1247, CW101C to EN BeCu

Typical Physical Properties:

Density (g/cm3): 8.36

Density before age hardening (g/cm3): 8.25

Elastic Modulus (kg/mm2 (103)): 13.40

Thermal Expansion Coefficient (20 C to 200 C m/m/C): 17 x 10-6

Thermal Conductivity (cal/(cm-s-C)): 0.25

Melting Range (C): 870-980

Physical property:

1.High strength2.High hardness3.High elasticity4.Superior fatigue resistance5.Superior abrasion resistance

6.Superior mouldability and isotropy

Available grades:

Pure grade (ASTM B394 - R04210)

Niobium-zirconium1% alloy (ASTM B394 - R04261)

Temper condition:Annealed

Dimension:Inner diameter - 0.2 mm to 5 mmLength - by requestDimension for niobium welded tube upon request

Standard: ASTM B 394Grade: RO4200 (pure Niobium ), RO4210 (Nb1%Zr)Outer Diameter: 1.0-150mmWall thickness: 0.2- 10mmPurity: 99.9% and 99.95%

Niobium rods and bars are commonly used in the superconductor industry.Manhar Metaloffersreactor grade NbRRR Niobium, and various niobium/titanium alloys for such markets.

Features :-

• Longer life span
• Dimensional accuracy
• Robustness

we offer to our clients, a wide range of butt-weld fittings which includes long/short radius elbows, equal/unequal tees, concentric/eccentric reducers, caps, cross, short/long neck stub-ends, long pipe bends of 3d/5d/6d/8d up to 22d, s/j/u/expansion bends & swivels. These are manufactured as per various industrial standards like ansi b 16. 9, b 16. 28 & mss sp-43.

nickel 200 (uns no.2200), nickel 201 (uns no.2201), nickel 205 (uns n0.2205)

astm / asme sb 336

long/short radius elbows, equal/unequal tees, concentric/eccentric reducers, caps, cross, short/long neck stub-ends

petrochemicals plantschemical plantsindustrial machinerypower industrygovernment companies

We are reputed SUPPLIERSs and exporters of high quality Sheets & Plates. These products are globally known for its compliance with the industry set norms. We offer them in various grades that meet the requirements of the client. Our range comprises of Stainless Steel Sheets & Plates.

High Speed Steel (HSS), HCHCR & OHNS in Grade :M2, M3, M35, M42, T-1, T-4, T-15, T-42, D2, D3, H11, H13, OHNS-01 & EN52.

EN Series in Grade :EN-1A, EN-3B, EN-8, EN-9, EN-16, EN-18, EN-19, EN-24, EN-29B, EN-31, EN-32B, EN-36, EN-36C, EN-42J, EN-45, EN-47, EN-48A, EN-100, EN-111, EN-202, EN-352, EN-353, EN-1117 Etc.

Backed by a team of skilled professionals, we are engaged in offering our clients a wide assortment ofMild Steel Pipe & Tube. The products offered by our organization are manufactured using superior quality raw material and modern technology at our well equipped manufacturing unit, which ensures high durability at its users end. These products are also provided in different sizes and dimensions as per the exact requirements of our clients.

Popular for:

• Dimensional accuracy

• High performance

• High durability

• Good malleability properties

• High efficiency

Used in:

• Production of steel furniture

• Material storage rakes

• Machine components

• Railway wagon

• Coaches

Mild steel, also called plain-carbon steel, is the most common form of steel because its price is relatively low while it provides material properties that are acceptable for many applications. Low-carbon steel contains approximately 0.050.3% carbon making it malleable and ductile. Mild steel has a relatively low tensile strength, but it is cheap and malleable. It is often used when large quantities of steel are needed, for example as structural steel.

We are the main supplier of this product.

Nichrome Is A Renowned Packaging Machines Manufactirer Of India. Nichromes Versatile, High Quality And Flexible Range Of Machines Have Won The Trust Of Many Established Brands In The Market.It Is The Oldest Documented Form Of Resistance Heating Alloy.Nichrome Is Used In Avery Wide Variety Of Devices Where Electric Heating Is Required. Nichrome Is Used In The Explosives And Fireworks Industry As A Bridgewire In Electric Ignition Systems, Such As Electric Matches And Model Rocket Igniters. Industrial And Hobby Hot Wire Foam Cutters Use Nichrome. Nichrome Is Commonlu Used In Ceramic As An Internal Support Structure To Help Some Elements Of Clay Sculptures Hold Their Shape While They Are Still Soft.

Nichrome Is Used For Its Ability To Withstand The High Temperatures That Occur When Clay Work Is Fired In A Klin. Nichrome Can Also Be Used As An Alternative To Plantinum Products For Flame Testing By Colouring The Non-Luminous Part Of A Flame To Detect Cations Such As A Sodium, Potassium, Copper, Calcium Etc.The Alloy Tends To Be Expensive Due To Its High Nickel Content. Distributor Pricing Is Typically Indexed To Market Prices For Nickel. Other Areas Of Usage Include Motorcycles Silencers, In Certain Areas In The Microbiological Lab Apparatus, As The Heating Element Of Plastic Extruders. The Heating Resistance Of Nichrome Wire Must Be Stable In Air When Hot. Nichrome Wire May Be Also Used As The Coils Of Elecronic Cigrattes For Vaping.

European Standards:CuBe2, DIN 2.1247, CW101C to EN BeCu

Typical Physical Properties:

Density (g/cm3): 8.36

Density before age hardening (g/cm3): 8.25

Elastic Modulus (kg/mm2 (103)): 13.40

Thermal Expansion Coefficient (20 C to 200 C m/m/C): 17 x 10-6

Thermal Conductivity (cal/(cm-s-C)): 0.25

Melting Range (C): 870-980

Physical property:

1.High strength2.High hardness3.High elasticity4.Superior fatigue resistance5.Superior abrasion resistance

6.Superior mouldability and isotropy

Temper condition:Annealed

Dimension:Inner diameter - 0.2 mm to 5 mmLength - by requestDimension for niobium welded tube upon request

Standard: ASTM B 394Grade: RO4200 (pure Niobium ), RO4210 (Nb1%Zr)Outer Diameter: 1.0-150mmWall thickness: 0.2- 10mmPurity: 99.9% and 99.95%

Manhar Metalselects high quality metal powder and technologic sintered in the hydrogen to produce tungstenpipe and other tungsten product s. Tungsten pipe is high purity and machinable. The crystal structure of tungsten tube is compact.

Properties1. menchanical properties:Hardness Hv>450Density d>19.2g/cm3
2. microstructure(vertical section)The fibred structureThe initial recrystallization temperature 1200--1250

Applications :

Used as the stell-making additiveFor producing tungsten targetsFor producing ion implantation partsFor rolling tungsten foil and punching tungsten discsFor producing electric light source parts and electric vacuum componentsFor producing heating elements and refractors in high temperature furnacesFor producing W-boats, and heating units in high temperature furnaces

We can supply seamless or welding molybdenum tube and pipe at verycompetitive prices of good quality .

In its pure form, molybdenum is a silvery-grey metal with a hardness of 5.5. it has a melting point of 2623 c (4753 f); of the naturally occurring elements, only tantalum, tungsten and carbon have higher melting points. weak oxidation of molybdenum starts at 300 c (572 f). it has one of the lowest coefficients of thermal expansion among commercially used metals. the tensile strength of molybdenum wires increases about 3 times, from about 10 to 30 gpa. when their diameter decreases from 50100 nm to 10 nm.[7] molybdenum is a transition metal with an electrone gativity of 2.16 on the pauling scale and a standard atomic weight of 95.95 g/mol. it does not visibly react with oxygen or water at room temperature, and the bulk oxidation occurs at temperatures above 600 c, resulting in molybdednium trioxide.

Molybdenum is also used in steel alloys for its high corrosive resistance and weldability. molybdenum contributes further corrosion resistance to type-300 stainless steelspecifically type-316) and especially so in the so-called super austentic stainless steels (such as alloy al-6xn, 254smo or 1925hmo). molybdenum acts by increasing lattice strain, thus increasing the energy required to dissolve out iron atoms from the surface. molybdenum can also be used to enhance the corrosion resistance of ferritic (for example grade 444) and martensitic (for example 1.4122 and 1.4418) stainless steels molybdenum dusts and fumes, which can be generated by mining or metalworking, can be toxic, especially if ingested (including dust trapped in the sinuses and later swallowed).low levels of prolonged exposure can cause irritation to the eyes and skin. direct inhalation or ingestion of molybdenum and its oxides should be avoided regulations specify the maximum permissible molybdenum exposure in an 8-hour day as 5 mg/m3. chronic exposure to 60 to 600 mg/m3 can cause symptoms including fatigue, headaches and joint pains

Products:-
Wire , block, rod , round bar, bright bar, rolled bar, square , hex , strips, flat, foil, sheet , coil, sleeting coil, plate, tubes, pipe, seamless pipes , fastner, nut bolt , crucibal, scrap, ingot , ring, bushes, disc.

Specifications
Purity:Mo>=99.95%
Density:>=9.7g/cm3
Characteristic:
high purity
high strength,
high melting point,
outstanding thermal conductivity,
excellent resistance to electrochemical corrosion,
excellent resistance to oxidation at high temperatures

We are reputed SUPPLIERSs and exporters of high quality Sheets & Plates. These products are globally known for its compliance with the industry set norms. We offer them in various grades that meet the requirements of the client. Our range comprises of Stainless Steel Sheets & Plates.

Specifications :-
Grades :F 5, F 9, F 11, F 12, F 22, F 91.

High Speed Steel (HSS), HCHCR & OHNS in Grade :M2, M3, M35, M42, T-1, T-4, T-15, T-42, D2, D3, H11, H13, OHNS-01 & EN52.

EN Series in Grade :EN-1A, EN-3B, EN-8, EN-9, EN-16, EN-18, EN-19, EN-24, EN-29B, EN-31, EN-32B, EN-36, EN-36C, EN-42J, EN-45, EN-47, EN-48A, EN-100, EN-111, EN-202, EN-352, EN-353, EN-1117 Etc.

Standard:ASTM / ASME A/SA 387
Range :5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length
Sheets & Plates In Form Of :Sheet, Plates, Flat, Strips, Profile, Blank , Circle, Ring etc.

Value Added Service :
Cutting
Bending
Forging
Rolling
Heat Treatment
Minor Fabrication

Backed by a team of skilled professionals, we are engaged in offering our clients a wide assortment ofMild Steel Pipe & Tube. The products offered by our organization are manufactured using superior quality raw material and modern technology at our well equipped manufacturing unit, which ensures high durability at its users end. These products are also provided in different sizes and dimensions as per the exact requirements of our clients.

Popular for:

• Dimensional accuracy

• High performance

• High durability

• Good malleability properties

• High efficiency

Used in:

• Production of steel furniture

• Material storage rakes

• Machine components

• Railway wagon

• Coaches

Tungsten copper nickel, tungsten copper iron, tungsten copper 80/20, thoriated tungsten, tungsten carbide Products:-rod, round, wire, sheet, foil, disc, square, ring, flat, rectangle
Tungsten carbidegrades:-yg-6, yg-8, yg-20
Products:-rod, sheet, plate

Tungsten is mainly used in the production of hard materials based on tungsten carbide, one of the hardest carbides, with a melting point of 2770 c. wc is an efficient electrical conductor, but w2c is less so. wc is used to make wear-resistant abrasives, and "carbide" cutting tools such as knives, drills, circular, mining and turning tools used by the metalworking, woodworking, mining, petroleum and construction industries. carbide tooling is actually a ceramic/metal composite, where metallic cobalt acts as a binding (matrix) material to hold the wc particles in place. this type of industrial use accounts for about 60% of current tungsten consumption.

The jewellery industry makes rings of sintered tungsten carbide, tungsten carbide/metal composites, and also metallic tungsten. wc/metal composite rings use nickel as the metal matrix in place of cobalt because it takes a higher luster when polished. sometimes SUPPLIERSs or retailers refer to tungsten carbide as a metal, but it is a ceramic because of tungsten carbide's hardness, rings made of this material are extremely abrasion resistant, and will hold a burnished finish longer than rings made of metallic tungsten. tungsten carbide rings are brittle, however, and may crack under a sharp blow.

The hardness and density of tungsten are applied in obtaining heavy metal alloys. a good example is high speed steel, which can contain as much as 18% tungsten. tungsten's high melting point makes tungsten a good material for applications like rocket nozzles, for example in the ugm-27 polaris submarine-launched ballistic missile. tungsten alloys are used in a wide range of different applications, including the aerospace and automotive industries and radiation shielding.superalloys containing tungsten, such as hastalloy and stellite, are used in turbine blades and wear-resistant parts and coatings.

Stainless steels resistance to corrosion and staining, low maintenance and familiar lustre make it an ideal material for many applications. there are over 150 grades of stainless steel, of which fifteen are most commonly used. the alloy is milled into coils, sheets, plates, bars, wire, and tubing to be used in cookware, cutlery, household hardware, surgical instruments, major appliances, industrial equipment (for example, in sugar refineries) and as an automotive and aerospace structural alloy and construction material in large buildings. storage tanks and tankers used to transport juices and other food are often made of stainless steel, because of its corrosion resistance. this also influences its use in commercial kitchens and food processing plants, as it can be steam-cleaned and sterilized and does not need paint or other surface finishes.stainless steel is used for jewelry and watches with 316l being the type commonly used for such applications. it can be re-finished by any jeweler and will not oxidize or turn black.some firearms incorporate stainless steel components as an alternative to blued or parkerized steel. some handgun models. this gives a high-luster finish similar in appearance to nickel plating. unlike plating, the finish is not subject to flaking, peeling, wear-off from rubbing (as when repeatedly removed from a holster), or rust when scratched.

Products:Wire , spring hard wire, fller wire, block, rod , round bar, bright bar, rolled bar, square , hex , strips, flat, foil, sheet , plate, tubes, pipe, seamless pipes , flanges, fastner, nut bolt
Type:Seamless / Erw / Welded/ Fabricated

Size :15 NB To 42"NB IN SCH20, SCH30, SCH40, STD, SCH80, XS

FormRound, square, rectangular, hydraulic etc.

LengthSingle Random, Double Ranidom & Cut Length

EndPlain End, Bevelled End, Treaded

Value Added Services Hot Dipped Galvanizing
Epoxy & FBE Coating
Electro Polish
Draw & Expansion

Nimonice Is A Registered Trademark Of Manhar Metal Supply Corporation That Refers To A Family Of Nickel-Based-High Temperature Low Creep Superalloys. Nimonic Alloys Typically Consist Of More Than 50% Nickel And 20% Chromium With Additive Such As Titanium And Aluminium.The Main Use Is The Gas Turbine Components And Extremely High Performance Reciprocating Internal Combustion Engines.

Nimonic Is A Series Of Nickel-Chromium Alloys Which Are Used Primarily For Creep Resistance, High Strength And Stability At High Temperature. It Is The Basic Jet For Engine Applications. A Nickel-Chromium Alloy Similar To Nimonic Alloy Has Made Precipitation Hardenable By Additions Of Aluminium And Titanium.The Alloy Has Good Corosion And Oxidation Resistance And High Tensile And Creep-Rupture Properties At Temperatures To 1500F (815C).Used For Gas-Turbine Components(Blades, Rings And Disc), Bolts, Tube Supports In Nuclear Steam Generators, Die-Casting Inserts And Crores, And Exhaust Valves In Internal-Combustion Engine.