Mumbai, Maharashtra, India
Our Products
Standard:
As per ASTM B521-98
Purity:
>=99.95% or 99.99
Tantalum tube is largely applied to produce tantalum response vessel, tantalum heat exchangers(shell & tube heat exchanger), tantalum pipe line(piping or channel), tantalum condenser, tantalum agitator, tantalum cooler, tantalum boiler, tantalum bayonet heater, tantalum spiral (helical) coil, U-tube heat exchanger or "U" tube bundle heat exchanger during the substance sector for condensing, re-boiling, preheating and cooling of nitric acid, sulfuric acid, hydrochloric acid, formic acid and combinations of those acids with a great deal of other chemicals.
the metal is very soft, malleable and easily fusible, with a melting point higher than sodium, but lower than lithium or tin indium is a very soft, silvery-white, highly ductile, relatively rare post-transition metalwith a bright luster. It is so soft (mohs hardness 1.2) that the metal can be cut with a knife, as can sodium. Indium is an post-transition metal and chemically, is the intermediate element between its group 13 neighbors gallium andthallium. An indium atom has 49 electrons, having an electronic configuration of 4d105s25p1.
in its compounds, indium most commonly loses its three outermost electrons, becoming indium ions, in3+, but in some cases the pair of 5s-electrons can stay within the atom, indium thus being oxidized only to indium(i), in+. This happens due to the inert pair effect, which occurs because of the stabilization of 5s-orbital due to relativistic effects, which are stronger closer to the bottom of the periodic table. In is the more stable oxidation state. Thallium (indium's heavier homolog) shows an even stronger effect, making oxidation to thallium(i) more likely than to thallium(iii), making +1 the more likely oxidation state, [9] whereas gallium (indium's lighter homolog) commonly shows only the +3 oxidation state. Thus, although thallium is a moderately strong oxidizing agent, indium is stable and indium is a powerful reducing agent.
We manufacture an exclusive range of Titanium Sheet & Titanium Plates that are made supreme quality titanium sheets. Our range of titanium sheet & titanium plates are quality tested on various parameters before they are delivered to our clients spread across the globe.
1875" to 3" x up to 96" Wide x to 240" Long
[Wider Widths, Custom and Special Shapes (Circles, Rectangles, Squares and Others) available on request.]
Plate can be Sheared, Saw Cut or Water-Jet Cut to Standard sizes or any Custom size (dependent upon Customer preference and size considerations)
020" to under .187" x up to 48" Wide x Length
Standard sizes: 48" Wide X 120" Long [Sheet can be sheared to any Custom size.]
[By ASTM definition, Sheet is product .187" (4.75 mm) and under in thickness and 24" (610 mm) or more in width.]
Tantalum tube is largely applied to produce tantalum response vessel, tantalum heat exchangers(shell & tube heat exchanger), tantalum pipe line(piping or channel), tantalum condenser, tantalum agitator, tantalum cooler, tantalum boiler, tantalum bayonet heater, tantalum spiral (helical) coil, U-tube heat exchanger or "U" tube bundle heat exchanger during the substance sector for condensing, re-boiling, preheating and cooling of nitric acid, sulfuric acid, hydrochloric acid, formic acid and combinations of those acids with a great deal of other chemicals.
Manhar Metal supplies sheets and plate products in a wide range of thicknesses and widths. We can offer flat rolled material cut to specific lengths or we can supply coiled sheet or strip shipped 0n cores. Although our products are typically produced to meet ASTM specifications, other specifications are available upon request.
Manhar Metal offers both powder metallurgy and typical electron beam processed tantalum sheet. The powder metallurgy grade tantalum is perfect for deep drawing and stamping applications.Its provides a fine grain structure and is isotropic. Therefore parts are less likely to be pitted or have rough surfaces.For high temperature applications such as furnace parts . This product is engineered to significantly increase the product life by slowing grain growth at high temperature.
Specifications:Condition:Annealed
|
Size |
Thickness: 0.07-10 mm Width: 30-1000 mm Length: 30-3000 mm |
|
Material |
UNS R05200, UNS R05400 |
|
Standard |
ASTM B708-98 |
|
Purity |
≥99.95% or 99.99% |
Chemical Composition:
|
Element |
R05200 (%,Max) |
R05400 (%,Max) |
|
C |
0.01 |
0.01 |
|
O |
0.015 |
0.03 |
|
N |
0.01 |
0.01 |
|
H |
0.0015 |
0.0015 |
|
Fe |
0.01 |
0.01 |
|
Mo |
0.02 |
0.02 |
|
Nb |
0.1 |
0.1 |
|
Ni |
0.01 |
0.01 |
|
Si |
0.005 |
0.005 |
|
Ti |
0.01 |
0.01 |
|
W |
0.05 |
0.05 |
Working primarily with Molybdenum , Manhar Metalsupplies refractory metals cut to sizefor various applications and industries. Depending on our superior water-jet cutting, blanchard grinding, and surface grinding abilities, we pride ourselves on meeting our clients' unique requirements. We're pleased to accommodate parts up to 1 inch in thickness, up to 10 feet long, and up 8 feet wide, and we can cut details within the material as well. With many of our customers requiring material for high-temperature furnace components, we maintain an impressive stock and feature a two day turnaround. Also appropriate for applications as diverse as medical devices and furnace rails, our cut plates and sheet metal serve numerous high-performance applications
Basic Info.
Powder:Not Powder
Purity:99.95min
Density:
10.2g/cm3
Melting Point:
2610c
Application Temperature Environment:
1500--1800c
Export Markets:
Global
Physical and chemical properties
(1) Density: 10.2g/cm3
(2) Surface roughness: < 1.6
(3) Purity: Mo99.95%min.
(4) Application temperature environment: 15001800
We offer Premium quality Nickel Alloy Plate and Sheets, which is designed to meet with various industrial functions. These nickel plates and nickel sheets are offered by us in a variety of sizes and is offered at industry leading prices.
Specifications :-
Grades :Nickel 200 (UNS No.2200), Nickel 201 (UNS No.2201), Nickel 205 (UNS N0.2205)
Standard:ASTM / ASME SB 162 / 127 / 424 /168 / 443 / 574 / 462
Sheets & Plates In Form Of:Coils, foils, shim sheet, perforated sheet, strip, flats, blank (circle), ring (flange), etc.
Value Added Service:
Heat treatment
Annealed & pickling
Rolling, cutting, bending, forging, minor fabrication, etc.
