My ExportersIndia

For Buyer

For Seller

For Help

Our Products

  1. Generators, Turbines & Power Plants 12 Products available
  2. Control Panels 8 Products available
  3. Diesel Engine Generator Set 5 Products available
  4. Transformers 4 Products available
  5. Industrial Transformer 2 Products available
  6. Solar Power Plants 2 Products available
  7. Industrial Lighting Fittings 2 Products available
  8. Breaker Panels 2 Products available
  9. Cable Raceway 2 Products available
  10. Voltage Stabilizer 2 Products available
  11. Electronic Components 1 Products available
  12. Motor Control Panels 1 Products available
  13. Road Safety Products 1 Products available
  14. AC Motor 1 Products available
  15. Electronic Gadgets 1 Products available
  16. Metal & Industrial Fabrication 1 Products available
  17. Energy Saving Device 1 Products available
  18. Lighting Fixture 1 Products available
  19. Electronic Transformers 1 Products available
  20. Plating Rectifiers 1 Products available
  21. Flood Lights 1 Products available
  22. Voltage Transformers 1 Products available
  23. Isolation Transformer 1 Products available
  24. Voltmeter 1 Products available
  25. Auto Transformer 1 Products available
  26. Circuit Breaker 1 Products available
  27. Scaffolding And Scaffolding Parts 1 Products available
  28. Electrical Circuit Breaker 1 Products available
  29. Perforated Sheet 1 Products available
  30. Electric Control Panels 1 Products available
  31. Cable Tray 1 Products available
  32. AC Drive Control System 1 Products available
  33. Cable Tray Fitting 1 Products available
  34. Industrial & Engineering Products 1 Products available
  35. Switchgear Panels 1 Products available
  36. FRP Cable Tray 1 Products available
  37. Servo Stabilizer 1 Products available
  38. HVAC System 1 Products available
  39. Grating 1 Products available
  40. Distribution Point Box 1 Products available
  41. Railing Fittings 1 Products available

Isolation Transformer

We offer a complete product range of Ultra Isolation Transformer

Ultra Isolation Transformer

  • Min. Order (MOQ) 1 Piece
  • Brand Name Marsz
  • Ratio 415 V / 415 V 3ph or 240 /240V 1ph. Nominal
  • Acceptable Input Range ±10%
  • Mode of Operation 1:1
  • Isolation Transformer Frequency 47 to 63 Hz.
  • Common Mode Noise Rejection Over 100 dB
  • Coupling Capacitances 0.012 PF
  • Dc Galvanic Isolation Over 500 Megohms Between Any Winding or Windings to Ground
  • Breakdown Strength 2500 VAC for 2 minutes
  • Load Regulation Within 3 to 5 %
  • Termination On Terminal Plate

Sailent Features:

Isolation Transformer:

Any Double Wound Transformer is internally an isolation transformer as the primary and secondary are isolated from one another through insulation. However, modern machines and systems need a truly isolated, clean and stable power requirement. This is ensured by an Ultra Isolation Transformer (UIT), it provides for total electrical and electrostatic isolation with most effective screening of spikes, surges and transients, further it gives a true isolated local neutral and dedicated earth which is very essential for modern machines. Ultra isolation Transformer attenuates common mode noise and transverse mode noise and provides for noise or interference free power. In principle, UIT only transfers 50 Hz. Power by transformers action through mutual inductance. It prevents transfer of RF and HF disturbances with extensive insulation between primary and secondary. The insulation levels withstands HV breakdown strength of 2.5 KV and gives a DC Galvanic isolation of above 1000 M.

 

Ingress Protection for enclosure for isolation Transformer:

MARSZ Isolation Transformer conform to IP-20 protection as per IS / IEC : 60529 : 2001 Requirements for other degree of protection can be offered on request.

 

Details of Earthing for Isolation Transformers:

It is recommended that every isolation Transformer should have its own grounded earth, complete in itself.

 

Constructional Features of Isolation Transformers:

Isolation Transformer shall invariably be in one air cooled section. The enclosures are constructed from M.S. angles and CRCA M.S. sheets of best quality. The professional painting process comprises of (i) 7-tank pre-treatment (ii) Primer Coating and (iii)Two coats of final finish paint or powder coating of specified shade.

 

Ordering Information

  • Input voltage
  • Output voltage.
  • Capacity
  • Number of phases
  • CMNR value
  • Coupling capacitances value.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us