Write a Review
Our Products
We offer a complete product range of Multi Effect Evaporator, Calandria Evaporator, Single Effect Evaporator, Open Pan Evaporator and Multi Effect Evaporator - (ht-22 )
Evaporation deals with the concentration of a non-volatile Solute from a solution by the removal of required amount of volatile solvent. Usually the solvent is water. By vaporizing a part of the solvent, useful product i.e. the concentrated solution or thick liquor is produced and the Vapor is discarded. Lung tube evaporators are usually used for the concentration of foamy liquids.
The set-up is consists of two evaporators fitted in series. Each is made up of Stainless Steel tubes surrounded by a Stainless Steel jacket and fitted with accumulator. Dilute solution is feed to the first evaporator. Steam from. a steam generator is supplied to evaporator to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapors of volatile solvent produced in first evaporator are supplied to the second evaporator. The vapors of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator is recycled through the evaporator.
Evaporation deals with the concentration of a non-volatile solute from a solution by the removal of required amount of volatile solvent. Usually the solvent is water. By vaporizing a part of the solvent, useful product i.e. the concentrated solution or thick liquor is produced and the vapour is discarded. Long tube evaporators are usually used for the concentration of foamy liquids. It is a short tube vertical evaporator; the tubes are surrounded by a Stainless Steel jacket and fitted with accumulator. Dilute solution is feed to evaporator and heated by Steam from a steam generator to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accuI1mlator is recycled through the evaporator.
Evaporation deals with the concentration of a non-volatile solute from a solution by the removal (If requited amount of volatile solvent. Usually the solvent is water. By vaporizing part of the solvent, useful product. i.e. the concentrated solution or thick liquor is produced and the vapor is discarded. Long tube evaporators are usually used for the concentration of foamy liquids.
The set-up consists of stainless steel tubes surrounded by a stainless steel jacket and fitted with accumulator. Dilute solution is feed to tubes. Steam from a steam generator is supplied to shell to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance nonvolatile solute collected in the accumulator is recycled through the evaporator.
Evaporation is a process for concentrating a solution by vaporizing part or all of the solvent. In most of the cast s the solvent is water. The Pan Evaporator set-up is designed to study the fundamentals of evaporation process. The set-up consists of a jacketed pan evaporator made of stainless steel and an electrically heated steam generator of suitable capacity. To evaporate the solution in pan, steam is allowed to enter in the jacket using a control valve. Condensate is collected from steam trap for energy measurement. Tilting is done by a worm gear arrangement to empty the pan.
Mass International (Mass International)
93, Preet Nagar, Jagadhri Road, Cantt- , Ambala, Haryana - 133001, India
Share us via
