Post Buy Requirement
MI
Hyderabad, Andhra Pradesh, India
Verified Add Review

Our Products

  1. Industrial Machinery 26 Products / Services available
  2. Testing Equipments 14 Products / Services available
  3. Hydraulic Machines 7 Products / Services available
  4. Laser Instruments 3 Products / Services available
  5. Tables 5 Products / Services available
  6. Testing Equipment 6 Products / Services available
  7. Industrial Control System 3 Products / Services available
  8. Ladies Tops 3 Products / Services available
  9. Other Products 74 Products available

Other Products / Services

Horizontal Test Systems

Features

  • 50 to 3000kN force rating systemss

  • All load frames have stiffness of 600kN/mm (optionally 1100)

  • Actuator stroke range from 100 to 1500mm

  • Testing speed range: 0.01 to 500 mm/min

  • Low friction and wear resistant actuators

  • Anti-rotation assembly

  • Next generation DSP based servo controller with 32 bit data acquisition

  • 24 kHz data acquisition & 24 kHz servo loop control

  • Accuracy 0.5% of read out value for load, strain and stroke

  • User friendly MTL-32 Windows software with dedicated application software

  • Servo controlled stroke, load and strain channels

  • High accuracy level for precise load and stroke control

  • Application software as per IS & ASTM standards

  • LCD touch screen operator control panel for basic operation of machine viz., hydraulics on-off, lo-hi pressure, E-stop, actuator jog up/down, slow or fast, hydraulic grip control

  • Load accuracy 0.5% of read out value from 0.2% to 100% of cell capacity

  • Stroke accuracy 0.5% of read out value

  • Electronically servo-controlled, variable flow, variable pressure power packs 4 to 500LPM

  • Green highly efficient hydraulic power packs

  • Contamination insensitive hydraulics


Applications



  • Tensile testing of long samples

  • Wires, ropes, chains, cables

  • Static and quasi static tests

  • Testing labs, quality control and R&D

View Complete Details

Multi-Channel Control Systems

The Model ECI-SFT 16.PP57.01 from Electro Communications Research Institute (ECI) is one of the most proven digital servo-controllers available for full-scale structural testing under both static and cyclic loading conditions. Full-scale strength and fatigue life evaluation for airworthiness certification of well-known transport and military aircraft including the Tu-204 passenger liner, Mig-29, Su-27 and Su-30 were performed on test rigs controlled by ECI-SFT controllers. More recently, the system was chosen for full-scale structural testing for endurance of the Sukhoi-Boeing Russian Super Jet program.

The quality and reliability of the ECI-SFT16.PP57.01 are ensured by exclusive use of B&R electronic hardware modules which serve as a global industry standard. The system and application software supplied with the ECI-SFT 16.PP57.01 reflect many years of experience of the Siberian Aircraft Research Institute (SibNIA). ECI is the prime contractor for full-scale test controls at SibNIA. The vast structural test hardware base at SibNIA with over 15, 000 sq. meters of test floor space and over a thousand servo-actuators served as the proving grounds for the ECI-SFT16.PP57.01.

Most full-scale structural tests on airframes require more than 16 channels of control. The Model ECI-SFT16.PP57.01 controller is engineered for operation in a real-time high-speed digital network. There is practically no limit on the No. of channels achievable using multiple Model ECI- SFT16.PP57.01controllers, connected to a single Master Host Computer. Up to 256 Model ECI-SFT16.PP57.01controllers can be connected to a single hub limited to 4096 control channels. B&R modules are engineered for operating in a networked environment with a wide choice of communication protocols, all of which are supported by application software drivers

Features :

  • 16, 32, 48, 96, 128, 256, 384, 512 Channels control systems
  • Multi-channel static and cyclic (fatigue) testing of airframe structures with up to 16 actuators or other control units such as fuel tank / cockpit / cabin pressure, temperature, etc
  • The control Nodes are Modular in design, allows easy upgradability to more No. of channels. Capable of operating independently and as group.
  • Connection of Dual Strain Bridge and one LVDT transducers for each of 16 control channels. Strain bridge pressure transducers may be connected for pressure control. Total 48 feedback channels. Dual strain bridge provision is used by application software to track load the parallel readouts and to suspend testing in the event of unacceptable deviation as an indication of fault.
  • Exercise of predefined test assignments including stepped tightly synchronized static loading, pre-programmed pseudo-random flight-by-flight load sequences and arbitrary load levels designated during operator control using pre-selected feedback channels including Force, Actuator Displacement, Pressure, temperature, etc.
  • Enforcement of upper and lower limits on feedback channels as well as limits on loop error, with option of HOLD, STOP/UNLOAD and TRIP.
  • Internal logical assignment of feedback channels to individual control channels
  • Independent drive control to disable/enable, any single, group of or all actuators
  • 16 channels of servo output with current rating 100 mA to suit Moog 2-stage servo-valves.
  • Data acquisition from all feedback, control and servo-output channels (total 96 analog channels) plus digital status of all 16 control channels.
  • Two channels of analog outputs for recording / display on external units. Any two of the acquired data channels (96) can be directed as either of these two outputs.
  • Grouping of control channels into independent test stations for use of Controller as host controller to multiple independent tests, each with its own set of control and feedback channels and with own sequence of testing, safety interlocks and drive control.
  • LOW LEVEL & HIGH LEVEL SOFTWARE FOR CONTROL SYSTEMS Features :
    • Capable of creating test setup in Static as well as Fatigue modes and executing them
    • Storage of test setup files and retrieves it for future use of similar test sequences
    • Waveform generator includes waveforms viz. Sine, Triangle, Square and ramp
    • Auto zero and Auto Calibration of each channel. Calibration details can be digitally stored.
    • User settable Electronic safety alarms (limits) to shutdown the power pack / individual or group of actuators in the event of alarm (ex. Max. Load, Min. Load, ) hits.
    • Data storage of each test conducted
    • Data acquisition rates up to 5 kHz per channel. User allowed to change the rates as per the test requirements
    • Tuning of all Servo channels with auto/user defined PID adjustments
    • Hydraulics Start / Stop with Low/High pressure control
    • Channels can be grouped to user choice or can be used independently.
    • Status display of test under progress with running segment No, elapsed segments etc.
    • Live Data Display of all channels in Analog and Digital forms
    • Log sheet for monitoring test sequences and events of each channel viz., start, stop, hold, limits, low pressure, high pressure, fault conditions, errors, alarms, etc.
    • Status display of all channels listing the alarms and reaction of the system
    • Each channel or a group of channels can be designated with the name of component or aircraft part under test
    • Graphical display of Set point, Feedback and servo signal of all channels
    • Histogram (bar graph) display of all feedback channels
    • Option to switch data recording ON/OFF during a test sequence
    • Report generation after the test is completed
    Applications :
    • Static and Fatigue load simulation on flight components or full flight
    • Static and fatigue load simulation on structural components or full structures
View Complete Details

Friction Stir Welding Machines

Features

  • Up to 6 Axes simultaneous & precise control

  • Self-reacting, high stiffness, multi axial load frame

  • Specimen mounting area 500mm x 500mm

  • 500mm stroke length in X & Y axes

  • High natural frequency frame

  • Vertical load capacities up to 100kN

  • 3000rpm water cooled spindle @ constant torque

  • Adjustable tool angle with Max angle of 100 with 0.50 resolution

  • Thickness range for welding 0.5mm to 65mm

  • Pipe size up to 100mm dia, 10mm wall thickness and 250mm length

  • Suitable to weld aluminum alloys, copper (optionally steel)

  • Digital Encoder for stroke measurement & control with resolution of 0.1micron

  • Stroke accuracy 0.5% of read out value

  • Speed accuracy 0.1% of set speed

  • Works out of 1 230VAC or 3 415VAC

  • Next generation DSP based servo controller with 32 bit data acquisition

  • 24 kHz data acqusition & 24 kHz servo loop control

  • Accuracy 0.5% of read out value on load & stroke


Applications

  • Aerospace, Pressure vessel, Ship building, Automotive industries, Nuclear Power plants

  • High temperature steels and alloys

  • Straight weld, 2D planar with circular & non circular

  • 3D contour, pipe and profile welding

  • Optional tools with different profiles based on application

View Complete Details

Elastomer Test Systems

Features



  • Fully integrated single footprint system

  • Interchangeable tooling to accommodate wide variety of dampers

  • Multifunction operator controls to enable part selection

  • Air conditioned enclosure for controls, electronics and computer

  • Fully digital control

  • 5/8/10/15/25 kN force rating actuators

  • 25/50/100 mm actuator stroke options

  • Works out of 1 230VAC or 3 415VAC

  • Next generation DSP based 32 bit multi station, multi-channel operation with simultaneous and accurate control of each actuator

  • 24 kHz data acqusition & 24 kHz servo loop control

  • 32 Bit data acquisition

  • Power packs rating from 11 LPM to 500LPM


Applications



  • Static & dynamic testing of elastomers

  • Determination of loaded height

  • Determination of static stiffness & dynamic rate

  • Determination of damping coefficient

  • Determination of tan delta / phase angle

  • Durability testing

  • Part qualification against prescribed tolerances

  • Statistical analysis

View Complete Details

Hot Press Plasma System

features:

self reacting, high stiffness load frames
600mm x 600mm daylight for specimen grippng area
linear bearings protect load cell & actuator from side loads
servo electric or servo hydraulic actuators option
load capacities up to 500kn
static and dynamic applications
auto centering feature
optional heating pad for elevated temperature testing
optional video extensometer facility


applications:


biological tissues & bio chemical constructs
soft plastics, fibers, bundles, wires etc
yield and ultimate strength
creep and visco elastic characteristics
fatigue and fracture toughness
modulus and poissons ratio
aerospace materials & design details evaluation
bi-axial stress strain response
pressure vessel shell skin response
View Complete Details

Digital Image Correlation (DIC)



A new, compact system for shape, deformation and strain analysis
Complete surface strain map during standard materials testing
Full field DIC measurements at Very High Temperatures


Digital Image Correlation (DIC) is rapidly becoming a standard non-intrusive instrument formaterials testing. LaVisions StrainMaster Portable is a compact and lightweight turnkey 2D and 3D DIC system for shape, deformation and strain measurement.Suitable for a huge range of applications where flexibility and portability is essential, LaVisions StrainMaster system is appropriate for a wide range of subject sizes.


The StrainMaster Portable software is comprehensive, accurate, fast, and very user friendly.Comprising state of the art laptop computer, highly sensitive Imager E-Lite cameras, and coldillumination system, this device is dedicated to the study and analysis of material behavior.


With vast experience in the area of scientific imaging systems and Digital Imaging Correlation(DIC), LaVision provides the ultimate in quality and performance for your materialsmeasurements needs. Comprehensive service and support is given throughout the life of theproduct via our factory trained engineers.


2D & 3D DIGITAL IMAGE CORRELATION SYSTEMS








Features :

  • High accuracy measurements of deformation and strain

  • Sensitive Imager E-Lite cameras combined with quality lenses

  • Ultra-rigid and lightweight mounting system

  • Equivalent to thousands of gauges on the specimen surface

  • Validate finite element simulations

  • Suitable in standard and harsh environments

  • Exceptional strain range - from micro strains to 1000% strain

  • Simple setup and calibration procedure

  • High strain rate impact through to long term fatigue testing

  • Dedicated laptop computer controlling image acquisition, processing, and project management

  • Highly efficient pulsed illumination system

  • Fast and user friendly calculations

  • Fixed frequency, manual trigger, and phase locked acquisition modes

  • Virtual strain gauge mode


Applications :

  • Fundamental materials analysis i.e., tensile, compression, bend, fatigue, impact

  • Investigation of component behavior under loading

  • Identification of strain hot spots on structures

  • Polymers and composite subjects

  • Flexible and woven materials

  • Biomedical studies of tissues and synthetic devices

  • Automotive engineering materials including engine parts and body panels

  • Deflection and testing of aerospace parts


Within the StrainMaster DIC software, a Least Squares Matching (LSM) approach with subset deformation is used to match the pattern in combination with higher order spline interpolation of the grey scale images.


Usually, the displacement field is calculated relative to the specimen in its undeformed state (typically the first image in the sequence). In cases where the deformation is relatively small the pattern in image N is matched directly back to the reference image. However, for large deformations the local pattern experiences significant changes and a sum of differential approach is used whereby the pattern is matched between successive images and then summed in a Lagrangian co-ordinate system.


Full Control

The DaVis platform offers complete hardware control with no need to rely on home-made triggering or separate multiple control porgrammes. It is possible to build acquisition loops specialized timing schemes.



  • Standard and high speed cameras

  • Data loggers for analogue data acquisition

  • Translation stages

  • Pulsed light sources


Phase locked recording of cyclic events such as fatigue testing is possible with the Strain Master controller and post-triggering of high speed events such as Split-Hopkinson pressure bar test is straightforward.


Operating in live mode or as a post-process, it is possible to apply virtual strain gages to the specimen surface. This approach using optical techniques has several advantages over conventional devices:



  • Non-contacting

  • No need to choose extensometer position before the test

  • Does not get damaged if specimen breaks

  • Can be used for specimen in solutions or in environmental chambers


Crack Growth Analysis

StrainMaster includes a crack growth analysis module to identify and track crack development in materials reporting crack length and crack opening.


This module works with non-speckled surfaces and the standard StrainMaster hardware.



View Complete Details

Digital Volume Correlation (DVC)

StrainMaster Digital Volume Correlation (DVC) is a novel technique for full 3D strain anddeformation measurements. The technique imports volume images of the component inreference and deformed states and is able to calculate the full 3D displacement and strainmap. Images are typically acquired from X-ray Computed Tomography (X-ray CT) systems, but can equally be obtained by Magnetic Resonance Imaging (MRI) systems for biologicalsubjects, or via optical tomography for transparent media; for which LaVision offer ourpatented Tomographic reconstruction algorithms as an add-on.


DVC is a powerful non-intrusivetechnique for the identification of sub-surface material deformation and is capable of identifying defects, discontinuities or other material characteristics.


Like its counterpart, Digital Image Correlation (DIC) which is restricted to surface-only measurements, in order for Digital Volume Correlation to be successful the volume imagesmust contain a random pattern. That random pattern is seen as changes in local contrast. Inthe case of X-ray CT scans the pattern will be produced by changes in material density suchas air voids in concrete, or particles of different material type within the main body matrix, such as tin particles distributed in an aluminium powder.


The volume image is sub-divided intointerrogation volumes within which robust and highly accurate algorithms calculate thedisplacement of the pattern, which represent the material shift. Digital Volume Correlationis capable of yielding over one million displacement vectors per volume image pair.


Advantages :

  • 3-dimensional 3-component (3D3C) displacement field in a complete volume

  • Full data management and processing within powerful DaVis software

  • Over 1 million displacement vectors possible

  • Advanced cross-correlation with deformed interrogation volumes, multi-pass iterations

  • Reconstruction with extremely large volumes: > 2000 x 2000 x 2000 voxel possible

  • Displacement accuracy to 0.05 pixel


Applications :

  • Biological research:Bone, fracture, cell deformation, tissue displacement

  • Geological:Tectonic plate simulation, compression tests

  • Metal powder:Material characterisation, compaction processing

  • Structural:Concrete bend test, crack analysis

  • Composites:Tensile testing, delamination

  • Polymers:Rapid prototypes, transparent media

View Complete Details

Multi Axes Structural Actuators

Features

  • Load Capacities 10kN to 2000kN static & dynamic

  • 1 to 16 channels, expandable to 64

  • Servo controlled actuators with pedestal mounting or face mounting or swivel mounting

  • Up to 1000mm strokes with measurement resolution down to 1 micron

  • Testing speed range 0.01 to 2500mm/min

  • Low friction and wear resistant actuators

  • LVDT / Digital Encoder for stroke measurement & control

  • Stroke accuracy 0.5% of read out value

  • Speed accuracy 0.1% of set speed

  • Works out of 1 230VAC or 3 415VAC

  • Next generation DSP based 32 bit multi station, multi-channel operation with simultaneous and accurate control of each actuator

  • 24 kHz data acqusition & 24 kHz servo loop control

  • 32 Bit data acquisition

  • Accuracy 0.5% of read out value for load, strain & stroke

  • Power packs rating from 11 LPM to 1500LPM


Applications

  • Tension/Compression/3 point bend

  • Testing of concrete slabs, I-channels, beams etc.

  • Compression, Flexural and pull tests

  • Testing of aerospace & automotive compo

View Complete Details

Dual Column Electro Dynamic Test System - Expert 3910

Features:

  • Load capacities up to 40N Dynamic

  • Fast acting, Voice Coil Actuator drive mechanism

  • Frequency capability up to 45Hz

  • Position control resolution down to 0.01mm

  • Piston strokes up to 75mm

  • Total vertical test space up to 600mm

  • Works out of 1 220VAC or 3440VAC

  • 32 bit Processor based controller

  • 8kHz servo loop update rates

  • Load accuracy 0.5% of read out value down to 1/500th of full capacity

  • Speed & position accuracy 0.1% of read out value

  • Strain accuracy 0.5% of read out value down to 1/50th of travel range/span>

  • 0-1.0 KHz data acquisition rates


Applications:

  • Very High Cyclic Fatigue load applications

  • Peel, Tear, Friction, Relaxation

  • Adhesives, biomaterials, elastomers, films, packaging, rubbers, plastics, wires, textiles, wood, metal strips, foils, fibers etc

View Complete Details

Multi Channel Control Systems

Our company has earned accolades in offering thermo mechanical fatigue test systems to the clients. Thermo mechanical fatigue test systems is manufactured from high quality material at vendors end and is exceptionally requested by esteemed customers. This product is made available in several specifications and sizes to the esteemed customers. These are easily installable and are able to operate in hassle free manner for long time period.



features:



high performance
rust resistance
high strength
load capacities from 25kn to 500kn dynamic
hydraulic lifts & clamps
frame stiffness: 1100knmm
works out of 1 230vac or 3 415 vac
up to 250 mm stroke servo-actuators
temperature range: 100 to 1100c
heating: integrated digital servo controlled induction heating with heating rates up to 50csec
cooling: integrated digital servo controlled air cooling
32 bit next generation dsp based servo controller
accuracy 0.5% of read out value for load, strain & stroke
optical pyrometers available optionally
self locking and water cooling hydraulic grips
applications:

axial low cycle fatigue
thermal cycling
thermo mechanical fatigue with in phase or out of phase control
optional axial torsion accessories
View Complete Details

Dynaimc Torsion Test Systems


Features:

  • Torque capacities 5Nm to 25Nm dynamic

  • Maximum angle: Infinite

  • Angle resolution 0.090

  • Servo motor drive mechanism

  • Infinite rotations with frequency capability

  • Dynamic capability up to 50Hz

  • Horizontal and vertical configurations available

  • Options for measuring linear movement and axial loads

  • Total vertical test space up to 600mm

  • Works out of 1 220VAC

  • 32 bit Processor based controller

  • 8kHz servo loop update rates

  • Torque accuracy 0.5% of read out value down to 1/100th of full capacity

  • Speed & position accuracy 0.1% of read out value

  • 0-1.0 KHz data acquisition rates


Applications:

  • Static torque applications

  • Dynamic torque applications

  • Bio medical implants



View Complete Details

Mechanical Wedge Grips


  • Load capacities ranging from 10kN to 100kN

  • Suitable for tensile and fatigue tests

  • Side mounting design

  • Various size jaw faces to accommodate flat and round samples

  • Suitable to use in environmental chambers

View Complete Details

Self-Aligned Hydraulic LCF Grips


  • Load capacities ranging from 25kN to 300kN

  • Self alignment & self locking feature eliminates requirement of alignment fixture&mechanical wedge washers

  • Ideal for Low cycle fatigue and tensile tests

  • Designed as per ASTM E 606 and meets E 1012 for alignment

  • High temperature version up to 12000C

View Complete Details

Compression Platens


  • Load capacities ranging from 5kN to 3000kN

  • Circular centering rings for proper placement of specimen

  • Hardened and ground

  • Comes with spherical seating on one platen

  • Wear resistant and case hardened

View Complete Details

3 Point Bend Fixture


  • Load capacities ranging from 25kN to 2000kN

  • Loading and support rollers dia range from 5 50mm

  • Continuously adjustable span from 25mm to 1000mm

  • Graduated scale for span

View Complete Details

Compact Tension (CT) Grips


  • Load capacities ranging from 5kN to 250kN

  • Designed as per ASTM E 647, E 1820, E399 & E813

  • Ideal for Fatigue crack growth and fracture mechancis studies

  • Wear and corrosion resistant

View Complete Details

Strain Gauged Load Cells


  • Load capacities ranging from 10N to 3000kN

  • 350 strain bridge design

  • Accuracy 0.5% of read out

  • Compatible with all jigs & fixtures

  • Suitable for tensile, compression and fatigue applications

View Complete Details

COD Gage


  • Full range of gage lenths from 5mm to 12mm

  • Travel ranges from 2 to 12mm

  • Self supporting

  • Ideal for fatigue crack growth & fracture mechanics

View Complete Details

H. T. COD Gage


  • Full range of gage lenths from 5mm to 12mm

  • Travel ranges from 2 to 12mm

  • Temperature range up to 12000C

  • With mounting bracket

  • For fatigue crack growth & fracture mechanics

View Complete Details

High Temperature Furnace


  • Temperatures up to 16000C

  • Nicrome / Moli Disilicide heating elements

  • K type or R type thermocouples

  • Temperature accuracy 1 /20C

  • 3-zone or 1-zone split tube

  • Comes with PID controller

  • Comes with mounting brackets

View Complete Details

Environmental Chambers


  • Temp range -190 to 4000C

  • Forced convection heating for high temperature

  • Liquid CO2 or LN2 for low temperature

  • Temperature accuracy 10C

  • Mounting and moving trolley assembly

  • Optional humidity feature

View Complete Details

Induction Heating System


  • Temperatures from 200 to 11000C

  • Temperature cycling option

  • Set point, output, timer and frequency display

  • Flameless non-contact heating

View Complete Details

Non-contact Pyrometer


  • Non-contacttemperature measurement

  • Temp range 200 12000C

  • Very high speed, fast 0.3 m-sec time constant

  • Spectral response 4.5 to 5.15 microns

  • Lead selenite detector

View Complete Details

Spot Welding Unit


  • Portable and light weight

  • 6 or more welds in a minute

  • Short recycle interval

  • Economical and easy to use

  • Front panel indicators and controls for monitoring

  • 5-250 watts second stored weld energy

View Complete Details

Corrosion Bath


  • With corrosive media spray options

  • Top and bottom fixturing access

  • High temparature facility as optionfrom 100 to 6000C

View Complete Details

Axial Torsion Load Cell


  • Torsional load capacities from 20Nm to 2kNm

  • Axial load 25kN to 500kN

  • Tension, compression and Torsion applications

  • 350 Ohm bridge resistance

  • Shear web design

  • Fatigue Rated

View Complete Details

Alignment Fixture


  • Designed to check alignment as per ASTM E 1012

  • Alignment check under load control

  • Percentage of bending in X and Y direction w.r.t axial bending stress

View Complete Details

Enclosure For Test Controls




  • Enclosure for housing host computer, controller, UPS, keyboard and mouse

  • Internal air conditioner to keep the operating temperature under control

  • Occupies very small foot print of 600 x 800 mm

  • Rat proof and dust proof




View Complete Details

Torsion Grips


  • Torque range upto 100Nm

  • For Torsion tests on round samples with dia 1.5 to 12mm

  • Keyless, hand tightened

  • Made of hardened steel

View Complete Details

Clamp Grips


  • For low force load applications

  • Force capacity up to 20N

  • Sample thickness up to 3.4mm

  • Smooth jaws supplied

  • Camping area 10mm x 10mm

  • Material Aluminium

View Complete Details

Small Vice Grips


  • Load capacityup to 2kN

  • For flat samples up to 10mm thick

  • Clamping jaw size 25mm x 25mm

View Complete Details

Wire Yarn & Twine Grips


  • Load Capacities 0.2kN, 2kN & 5kN

  • For testing of fine wires, fibers, cords, filaments, yarns etc.

  • Guids horn with centering groove

View Complete Details

O Ring Grips


  • Load capacities ranging from 100N to 5kN

  • Motorized bottom fixture

  • For Orings of Dia up to 100mm

  • As per ASTMD 1414

View Complete Details

Puncture Test Fixture


  • Load capacity up to 50kN

  • Plunger diameter 2-90mm

  • Hole diameter 5-100mm

  • Suitable for puncture resistance of plastic films, fabrics and other materials

View Complete Details

Bolt Grips


  • Capacity: 2kN to 200kN

  • Steel Construction

  • For bolts and fasteners samples

  • For wire crimp samples

View Complete Details

Shoulder Specimen Grips


  • Load capacities ranging from 200N to 50kN

  • Material of Construction: steel

  • For testing shouldered (button headed) specimens

View Complete Details

Threaded Specimen Grips


  • Capacity: Up to 100kN

  • Steel Construction

  • For testing threaded specimens

  • Max dia: user choice

View Complete Details

Peel Test Fixture


  • Capacity: 10kN

  • Material of Construction: Aluminum

  • For testing peel specimens

  • Max sample width 50mm

  • Max. sample length 250mm

View Complete Details

Friction Fixture


  • Capacity: 200Gr

  • Material of Construction: Aluminum

  • To measure coefficient of friction of plastic film and sheeting

  • Max sample width 100mm

View Complete Details

Rope Testing Grips

  • Material steel
  • Capacity 200N to 50kN

  • Capacity: 200N to 50kN

  • Material of Construction: steel

  • For rope samples

  • Max sample dia 20mm

View Complete Details

Self-tightening Eccentric Roller Grips


  • Load capacities ranging from 1kN to 10kN

  • For samples of 0-7mm thick

  • Width 50mm

  • Material of construction Aluminum and steel

  • High temperature version up to 3000C

View Complete Details

Pneumatic Grips


  • Load capacities ranging from 200N to 50kN

  • For flat samples of 0-15mm thickness and 50mm width

  • Pneumatic foot pedal switch

  • Material of construction Aluminum and steel

  • Subzero and elevated temperature applications from -70 to +3500C

View Complete Details

Axial Torsion Test Systems 8600 Series

Features:

  • Axial Load capacities from 0.2kN to 50kN

  • Torsional Capacities from 1Nm to 100Nm

  • Precision backlash free ball screw drive mechanism

  • Servo motor based drive system for precise axial position control

  • Testing speed range: 0.0005 to 508mm/min

  • Fast Acting Servo motor based drive systems for precise torque applications

  • Testing speed range: 30 to 70 RPM

  • Position control resolution down to 0.0001mm

  • Long strokes up to 1, 200mm

  • Horizontal test space up to 550mm

  • Works out of 1 220VAC

  • 32 bit Processor based controller

  • 8kHz servo loop update rates

  • Load accuracy 0.5% of read out value down to 1/500th of full capacity

  • Speed & position accuracy 0.1% of read out value

  • Strain accuracy 0.5% of read out value down to 1/50th of travel range

  • Torque accuracy 0.5% of read out value down to 1/50th of torque range

  • 0-1.0 KHz data acquisition rates


Applications:

  • Tensile, Compression, 3 Point bend

  • Static torque tests

View Complete Details

Shock Absorbers Test Systems

Features

  • Single station and dual station test systems

  • Compact single foot print packaging

  • Dynamic force rating: 8, 10 & 15kN

  • Actuator stroke: 150 to 250mm

  • Velocity range: 0.01 to 3.5 mtr/sec (up to 7 mtr/sec optional)

  • Safety interlocks against pump failure and power failure

  • Tooling suitable to 2, 3 and 4 wheeler parts

  • Optional features viz., light screen, part present, rod assembly inserted, grips closed senses

  • Tilting option with variable angle from 0 to 900

  • Fully programmable priming and stroking conditions including number cycles and stroke/sec

  • Up to 8 programmable velocities in single test

  • Gas charge/seal friction measurement with loop tilt correction

  • Auto taring of part weight at commencement of test

  • Works out of 1 230VAC or 3 415VAC

  • Next generation DSP based 32 bit multi station, multi-channel operation with simultaneous and accurate control of each actuator

  • 24 kHz data acqusition & 24 kHz servo loop control

  • 32 Bit data acquisition

  • Power packs rating from 11 LPM to 1500LPM


Applications

  • Shock absorber durability tests

  • Struts durability

View Complete Details

Axial Torsion Test Systems

Features



  • 25 to 600 kN Axial force rating systems

  • Torsional capacity 50N-m to 2000N-m

  • Actuator in base or in top cross head to suit application

  • 2-column up to 1100kN/mm high stiffness load frames

  • Next generation DSP based servo controller with 32 bit data acquisition

  • 24 kHz data acqusition & 24 kHz servo loop control

  • Accuracy 0.5% of read out value for load, strain, stroke, torque and angle

  • User friendly MTL-32 Windows software with dedicated application software

  • High temperature extensometer

  • Self locking and water cooled hydraulic grips

  • Green highly efficient hydraulic power packs


Applications



  • Axial static / fatigue

  • Torsional static / fatigue

  • Axial torsion static / fatigue

  • Smooth round, flat and tubular samples

  • Determination of static stiffness and dynamic rate

  • Determination of loaded height

  • Durability testing

  • Part qualifications against prescribed tolerances

  • Statistical analysis

View Complete Details

Dual Column Floor Standing Test Systems 2600 Series

Features:

  • Load capacities from 50kN to 400kN

  • Precision backlash free ball screw drive mechanism

  • Servo motor based drive system for precise control

  • Testing speed range: 0.0005 to 508mm/min

  • Position control resolution down to 0.0001mm

  • Long strokes up to 1, 600mm

  • Horizontal test space up to 600mm

  • Works out of 1 220VAC or 3 440VAC

  • 32 bit Processor based controller

  • 8kHz servo loop update rates

  • Load accuracy 0.5% of read out value down to 1/500th of full capacity

  • Speed & position accuracy 0.1% of read out value

  • Strain accuracy 0.5% of read out value down to 1/50th of travel range

  • 0-1.0 KHz data acquisition rates


Applications:

  • Tensile, Compression, 3 Point bend

  • Cyclic load applications

  • Peel, Tear, Friction, Relaxation

  • Adhesives, biomaterials, elastomers, films, packaging, rubbers, plastics, wires, textiles, wood, metal strips, foils, fibers etc.

View Complete Details

Other Systems From Lavision

Flow Master : PIV/PTV-Systems

LaVision FlowMaster system family evaluates three-dimensional velocity vector fields from scattered light patterns of particles or droplets seeded into the flow (liquid or gas). Techniques like Particle Image Velocimetry (PIV) and Particle Tracking Velocimetry (PTV) are supported. LaVision's FlowMaster PIV cameras can record two successive images within min. time < 100 ns for ultrafast cross-correlation and speeds up to Mach 4. Standard 2D-PIV (2D2C) measures two velocity components in a plane using a single CCD or sCMOS camera. Stereo-PIV(2D3C) measures three velocity components in a plane using two cameras. Time-resolved PIV measures two or three velocity components in a plane at high frame rates up to 25000 fps Tomographic PIV (Tomo-PIV) measures three velocity components in a volume (3D3C) using two or more cameras. Micro-PIV measures two or three velocity components of particle seeded flows with micron scale spatial resolution.


Applications :

Liquid and gas flow investigations in wind tunnels, water channels, in-cylinder engines industrial flow systems, compressors, turbines, fans, pumps, Micro Electro Mechanical Systems (MEMS)

View Complete Details

Dual Column Electro Dynamic Test System

Features:

  • Load capacities 1.3kN, 3kN and4.3kN Dynamic (3 sec)

  • Static capacities 0.7kN, 1.4kN and 2kN respectively

  • Fast acting, High Efficiency Servo motor drive mechanism

  • Testing speed range: 0.025 to 500mm/min

  • Frequency capability up to 100Hz

  • Position control resolution down to 0.001mm

  • Piston strokes up to 50mm (optionally up to 100mm)

  • Total vertical test space up to 800mm

  • Horizontal test space up to 400mm

  • Works out of 1 220VAC or 3440VAC

  • 32 bit Processor based controller

  • 8kHz servo loop update rates

  • Load accuracy 0.5% of read out value down to 1/500th of full capacity

  • Speed & position accuracy 0.1% of read out value

  • Strain accuracy 0.5% of read out value down to 1/50th of travel range

  • 0-1.0 KHz data acquisition rates


Applications:

  • Tensile, Compression, 3 Point bend

  • Very High Cyclic Fatigue load applications

  • Peel, Tear, Friction, Relaxation

  • Adhesives, biomaterials, elastomers, films, packaging, rubbers, plastics, wires, textiles, wood, metal strips, foils, fibers etc

View Complete Details

Optical Pyrometers

Sintering force capacities 50kN to 1000kN
250 mm stroke Single RAM or Dual RAM options
Fully integrated and independent programmable pulsed or direct DC-power generator for working temperatures up to 2400C with maximum temperature to 2500C
Servo controlled induction heating up to 1200C
Furnaces for atmospheric operations up to 1200C
Optical pyrometerthermo couple integrated with the system for temperature measurement of mold, top & bottom rams
View Complete Details

Hydraulic Damper

Unique dual capacity actuator mounting frame with two side actuators
Interchangeable tools to accommodate variety tests
Frame stiffness 1100kNmm
Up to 150 mm stroke servo hydraulic actuators
Auto centering featureto ensure zero side loads
Digital Encoder for stroke measurement & control with resolution of 0.1micron
Stroke accuracy 0.5% of read out value
Speed accuracy 0.1% of set speed
Works out of 1 230VAC or 3 415VAC
Next generation DSP based servo controller with 32 bit data acquisition
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Rajender Prasad (Measure India Corporation Private Limited)
  • MIC House, H.No: 12-2-41/4, Plot No: 41, Sree Nagar, Rampally, Keesara (M), Medchal-Malkajgiri District, Hyderabad - 501301, Telangana, India, Habsiguda, Andhra Pradesh
  • Share us via
  • Call 08068051354 Ext. 864