Measure India Corporation Private Limited - Industrial Machinery

• Load capacities from 50kN to 300kN
• Precision backlash free ball screw drive mechanism
• Servo motor based drive system for precise position control
• Testing speed range: 0.01 to 50 mm/min
• Position control resolution down to 0.00006mm
• Long strokes up to 100mm
• Horizontal test space up to 300mm
• Works out of 1 220VAC
• 32 bit Digital Signal Processor based controller
• 5kHz servo loop update rates
• Load accuracy 0.5% of read out value down to 1/100th of full capacity
• Speed accuracy 0.5% of set speed
• Position accuracy 0.5% of read out
• Strain accuracy 0.5% of read out value down to 1/50th of travel range
• 0-1.0 KHz data acquisition rates
• Optional LVDT assemblies for compressive deflection measurements

• Compression strength of building materials
• Concrete blocks
• Concrete slabs
• Concrete beams
• ASTM C 349, 109, ISO 679, EN 196

• Load capacities from 10kN to 300kN
• Precision backlash free ball screw drive mechanism
• Servo motor based drive system for precise position control
• Testing speed range: 0.01 to 50 mm/min
• Position control resolution down to 0.00006mm
• Long strokes up to 100mm
• Horizontal test space up to 300mm
• Works out of 1 220VAC
• 32 bit Digital Signal Processor based controller
• 5kHz servo loop update rates
• Load accuracy 0.5% of read out value down to 1/100th of full capacity
• Speed accuracy 0.5% of set speed
• Position accuracy 0.5% of read out
• Strain accuracy 0.5% of read out value down to 1/50th of travel range
• 0-1.0 KHz data acquisition rates
• Optional LVDT assemblies for compressive deflection measurements

• Flexural strength of building materials
• Concrete slabs
• Concrete beams
• I Channels
• ASTM C 349, 109, ISO 679, EN 196

Features

• 50 to 500 kN force rating systems
• Integrated digital servo controlled induction heating from 200 to 11000C temperature range
• Heating rates up to 500C/sec
• Integrated digital servo controlled compressed air cooling
• Cooling rates up to 500C/sec
• Next generation DSP based servo controller with 32 bit data acquisition
• 24 kHz data acqusition & 24 kHz servo loop control
• User friendly MTL-32 Windows software with dedicated application software
• TMF Software designed as per ASTM E 2368
• High temperature extensometer
• Self locking and water cooled hydraulic grips
• Green highly efficient hydraulic power packs

Applications

• Axial low cycle fatigue
• Thermal cycling
• Thermo-mechanical cycling with independent phase control (in-phase & out of phase)
• Optional axial torsion testing
• Optional axial torsion plus internal pressurization
• Optional axial/torsion/pressure/thermal cycling with phase control

Optional

• Vacuum chamber to house grips and specimen
• Non contact temperature measurement (Pyrometer)
• Spot welding units for thermocouple

Thermo Mechanical Fatigue Test Systems simulate combined effects of thermal cycling and mechanical fatigue. These systems are useful for testing specimens subjected to synchronized heating, cooling and temperature compensated strain or force with optional expansion to simultaneous torsion or internal pressurization. These fully integrated test systems are ideally suited for aerospace and power generation industries.

The specimen under test is subjected to fast rate heating followed by rapid cooling by means of a digitally controlled induction heater and pneumatic air directed on the specimen through air cooling nozzles.

• Load capacities from 50kN to 600kN
• Precision backlash free ball screw drive mechanism
• Servo motor based drive system for precise position control
• Testing speed range: 0.001 to 500 mm/min
• Position control resolution down to 0.00002mm
• Long strokes up to 1, 600mm
• Horizontal test space up to 700mm
• Works out of 1 220VAC or 3 380 VAC
• 32 bit Digital Signal Processor based controller
• 5kHz servo loop update rates
• Load accuracy 0.5% of read out value down to 1/100th of full capacity
• Speed accuracy 0.5% of set speed
• Position accuracy 0.5% of read out
• Strain accuracy 0.5% of read out value down to 1/50th of travel range
• 0-1.0 KHz data acquisition rates

• Tensile, Compression, 3 Point bend
• Cyclic load applications
• Peel, Tear, Friction, Relaxation
• Adhesives, biomaterials, elastomers, films, packaging, rubbers, plastics, wires, textiles, wood, metal strips, foils, fibers etc.

• Load Capacities 500kN to 3000kN static & dynamic
• Frame stiffness 1100kN/mm (optionally up to 6600kN/mm)
• Up to 300 mm stroke servo-actuators with 1micron resolution
• Works out of 3 415 VAC
• Next generation DSP based servo controller with 32 bit data acquisition
• 24 kHz data acqusition & 24 kHz servo loop control
• Accuracy 0.5% of read out value for load, strain & stroke
• 0-100 Hz cyclic frequency operation. Frequency response depends on combination of power pack & servo valve flow rate
• Power pack rating 11 LPM to 500 LPM

• Tension/Compression/3 point bend
• Static and Fatigue Tests
• Concrete Cubes
• Concrete beams
• Rock Mechanics
• Rails
• I-Channels
• Pipes
• High Strain Rate

• Load capacities from 200N to 50kN
• Precision backlash free ball screw drive mechanism
• Servo motor based drive system for precise control
• Testing speed range: 0.0005 to 2, 540 mm/min
• Position control resolution down to 0.0001mm
• Long strokes up to 1, 600mm
• Horizontal test space up to 500mm
• Works out of Single phase 220VAC
• 32 bit Processor based controller
• 8kHz servo loop update rates
• Load accuracy 0.5% of read out value down to 1/500th of full capacity
• Speed & position accuracy 0.1% of read out value
• Strain accuracy 0.5% of read out value down to 1/50th of travel range
• 0-1.0 KHz data acquisition rates

• Tensile, Compression, 3 Point bend
• Cyclic load applications
• Peel, Tear, Friction, Relaxation
• Adhesives, biomaterials, elastomers, films, packaging, rubbers, plastics, wires, textiles, wood, metal strips, foils, fibers etc.

• Load Capacities 50kN to 600kN static & dynamic
• Frame stiffness 1100kN/mm
• Up to 250 mm stroke servo hydraulic actuators with 1micron resolution
• Fully Integrated and Self contained.
• Works out of 1 230VAC, NO need of 3
• No need of external water cooling arrangements
• Next generation DSP based servo controller with 32 bit data acquisition
• 24 kHz data acqusition & 24 kHz servo loop control
• Accuracy 0.5% of read out value for load, strain & stroke
• 0-5 Hz operation (for max amplitude 50um)
• Noiseless operation
• Power pack rating 4 LPM

• Tension/Compression/3 point bend
• Ductile and Brittle Fracture toughness (K1c, J1c, CTOD, J-R)
• Threshold stress intensity
• Low-Cycle Fatigue (LCF)s
• Elastomeric properties
• Low / High temperature tests (-1500C to 11000C)

• Load Capacities 5kN to 25kN static & dynamic
• Frame stiffness 600kN/mm
• Up to 50 mm stroke servo hydraulic actuators with 1micron resolution
• Fully Integrated and Self contained
• Works out of 1 230VAC, NO need of 3
• No need of external water cooling arrangements
• Next generation DSP based servo controller with 32 bit data acquisition
• 24 kHz data acqusition & 24 kHz servo loop control
• Accuracy 0.5% of read out value for load, strain & stroke
• 0-100 Hz operation (with stroke amplitude of max 50microns)
• Noiseless operation
• Power pack rating 4 LPM

• Tension/Compression/3 point bend
• Ductile and Brittle Fracture toughness (K1c, J1c, CTOD, J-R)
• Fatigue crack propagation (da/dN)
• Threshold stress intensity
• Low-Cycle/High-Cycle Fatigue (LCF/HCF)
• Elastomeric properties
• Low / High temperature tests (-1500C to 10000C)

• Load Capacities 50kN to 600kN static & dynamic
• Frame stiffness 1100kN/mm
• Up to 300 mm stroke servo hydraulic actuators with 1micron resolution
• Works out of 3 415 VAC
• Next generation DSP based servo controller with 32 bit data acquisition
• 24 kHz data acqusition & 24 kHz servo loop control
• Accuracy 0.5% of read out value for load, strain & stroke
• 0-100 Hz cyclic frequency operation. Frequency response depends on combination of power pack & servo valve flow rate
• Noiseless operation
• Power pack rating 11 LPM to 500 LPM

• Tension/Compression/3 point bend
• Ductile and Brittle Fracture toughness (K1c, J1c, CTOD, J-R)
• Fatigue crack propagation (da/dN)
• Threshold stress intensity
• Low-Cycle/High-Cycle Fatigue (LCF/HCF)
• Elastomeric properties

• Load Capacities 25kN to 50kN static & dynamic
• Frame stiffness 600kN/mm
• Up to 300 mm stroke servo hydraulic actuators with 1micron resolution
• Works out of 1 230VAC or 3 415 VAC
• Next generation DSP based servo controller with 32 bit data acquisition
• 24 kHz data acqusition & 24 kHz servo loop control
• Accuracy 0.5% of read out value for load, strain & stroke
• 0-100 Hz cyclic frequency operation. Frequency response depends on combination of power pack & servo valve flow rate
• Noiseless operation
• Power pack rating 4 LPM to 500 LPM

• Tension/Compression/3 point bend
• Ductile and Brittle Fracture toughness (K1c, J1c, CTOD, J-R)
• Fatigue crack propagation (da/dN)
• Threshold stress intensity
• Low-Cycle/High-Cycle Fatigue (LCF/HCF)
• Elastomeric properties
• Low / High temperature tests (-1500C to 10000C)