Mechatronic Control System

Ichalkaranji, Kolhapur, Maharashtra

This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution.

We manufacture and supply premium quality Fatigue Testing Machine which is a rotating beam type machine in which Machine meets requirement of IS 5075-1969. This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries.

Model : Mech.CS.FT Working :In our Fatigue Testing Machine, the load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibers of the specimen is produced during each revolution. The bending moment is applied with the lever system and can be easily changed by moving a weight over the lever. Total number of revolution at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure.

Features :

• Light weight, Simple design, Compact Size
• Simple lever system for changing load
• Table model, no need of foundation
• Calibration in Nm available on request

Specifications :

• Testing dia of specimen (mm) : 8
• Bending moment adjustable (Kg.cm) : 25 - 200
• Ranges : 1 - Kg.cm II - Kg.cm 25- 125 125-200
• Main Supply : 3ph 440v 50hz
• Overall size (mm) : 1000LX500WX600 H
• Max. bending moment (Kg. cm) : 200
• Rotating speed in RPM : 4200
• Accuracy of applied bending moment : 1%
• Mechanical Counter : No. of digits Multiplying factor: 6 3
• Power required in HP : 0.5
• Gripping dia of specimen (mm) : 12
• Weight (Kg) : 120

Optional Features :

• 6 digit electronic counter instead of mechanical counter can be supplied at additional price.
• Machine with maximum bending moment up to 400 Kg. cm can be offered on request.

Click Here For More Detail

These are high precision, high performance universal testing machines, maximum capacity up to 100 kN. With the help to computer and micro-computer, all the operations from control of load to processing of data are carried out with excellent performance, reliability, flexibility and easy operation.omputer controlled mechanism under windows 2000XP.Variable speed drive with DC AC servo drive options.Automatic identification and interchangeability of load cells.

Digital Impact Testing Machine is engineered by the team of technical experts ensuring complete precision. Our Digital Impact Testing Machine is widely used in numerous industrial applications for the accurate measurements of digital impacts.

Model : Mech.CS.IT-30(D) Functions :

• Conduct IZOD, CHARPY Test
• Confirm following standards
  • BS: 131: part 4-1972 (amended 15 Aug. 1993)
  • BSEN : 10045-2: 1993
  • ASTM : E-23-94a
• Release pendulum swings down to brake the specimen
• Absorbed energy so that the measures can be read in between the height of drop before rupture
• Height of increase after rupture of the test specimen
• Maximum pointer position on the dial scale (It is read on Digital Panel in case of digital models)

Accessories :

• Pendulum is mounted on antifriction bearings
• Two starting positions :
  • Upper one for CHARPY
  • Lower one for IZOD Testing
• Controls of Pendulum :
  • supports in the starting positions is by a self resetting latch
  • Release mechanism is operated by lever
• Strikers & Supports :
  • Two strikers and one combined support
  • Lift it into the pendulum
  • Base of the machine for IZOD & CHARPY test
  • Change from one striker to another is achieved simply by fixing the new striker into it's position
• Caliper gauge for checking V notch for IZOD & CHARPY
• Templates for checking 10 x 10 mm cross section of IZOD / CHARPY Test Specimen
• Depth notch gauge including V & U notch gauges for checking depth blow V/U notch, angle, and radius
• Self-centering tong for quick and accurate setting of CHARPY Test Specimen
• 'V' notch milling cutter
• 'U' notch milling cutter

The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale

Mechatronic Control System is one of the leading companies, which is involved in the manufacturing and supplying of Torsion Testing Machines. These Torsion Testing Machines are designed with precision under the supervision of experts.

Model : Mech.CS.TT Features :

• Auto torque selector to adjust torque ranges
• Geared motor to apply torque to specimen through gearbox
• Autographic recorder for relation between torque and angle of twist
• Accuracy + 1 % of the true torque
• Suitable for Torsion and Twist test on various metal rods and flats
• Torque Measurement by pendulum dynamometer system

Attributes :

• Offer reliable results
• Anti-corrosive
• Hassle free operations
• Less time consuming

Suitable for Torsion and Twist test on various metal rods and flats.Torque Measurement by pendulum dynamometer system.Auto torque selector to adjust torque ranges.Geared motor to apply torque to specimen through gearbox.Autographic recorder for relation between torque and angle of twist.Accuracy + 1 % of the true torque

Digital Impact Testing Machine is engineered by the team of technical experts ensuring complete precision. Our Digital Impact Testing Machine is widely used in numerous industrial applications for the accurate measurements of digital impacts.

Model : Mech.CS.IT-30(D) Functions :

• Conduct IZOD, CHARPY Test
• Confirm following standards
  • BS: 131: part 4-1972 (amended 15 Aug. 1993)
  • BSEN : 10045-2: 1993
  • ASTM : E-23-94a
• Release pendulum swings down to brake the specimen
• Absorbed energy so that the measures can be read in between the height of drop before rupture
• Height of increase after rupture of the test specimen
• Maximum pointer position on the dial scale (It is read on Digital Panel in case of digital models)

Accessories :

• Pendulum is mounted on antifriction bearings
• Two starting positions :
  • Upper one for CHARPY
  • Lower one for IZOD Testing
• Controls of Pendulum :
  • supports in the starting positions is by a self resetting latch
  • Release mechanism is operated by lever
• Strikers & Supports :
  • Two strikers and one combined support
  • Lift it into the pendulum
  • Base of the machine for IZOD & CHARPY test
  • Change from one striker to another is achieved simply by fixing the new striker into it's position
• Caliper gauge for checking V notch for IZOD & CHARPY
• Templates for checking 10 x 10 mm cross section of IZOD / CHARPY Test Specimen
• Depth notch gauge including V & U notch gauges for checking depth blow V/U notch, angle, and radius
• Self-centering tong for quick and accurate setting of CHARPY Test Specimen
• 'V' notch milling cutter
• 'U' notch milling cutter