Our Products
Automatic High Speed Linear Bottle Washing Machines |
The MP High Speed Linear Bottle Washing Machine is most ideal for Round Bottles and finds wide application in PHARMA, FOOD & BEVERAGES INDUSTRIES. The automatic loading arrangement facilities loading of bottles on to SS wire mesh conveyor through feed conveyor or bottles are pushed manually from feed table. This saves manpower as bottles are feed into pockets automatically. The automatic unloading mechanism consists of unloading bottle continues on to Turn Table (Optional). |
Operation : |
Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. as per the rinsing requirement of bottle. All the pumps are made of SS and all the water contact parts are made of SS 316 on a heavy base of SS structure. In tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. Approved materials only are used for construction, together with a careful choice of components, thereby taking in to consideration all aspects of sanitation and consequence complying with the pharmaceutical G.M.P. requirements. The quality of rinsing is ensured through 3 sets of inner and 2 sets of outer nozzles accurately placed to direct the jet at center of the bottle and the bottle comes out with water totally drained with minimum droplets of water. |
Technical Specifications : Salient Features :
|
Model : | MPLBW-100 | MPLBW-150 | MPLBW-200 | MPLBW-240 | ||||||||||||||||||||
Out put / Hour* : | 6000 bottles | 9000 bottles | 12000 bottles | 14000 bottles | ||||||||||||||||||||
No. of Pocket Across : | 10 | 12 | 16 | 20 | ||||||||||||||||||||
Electrical Specification** : |
|
|||||||||||||||||||||||
Tank Capacity : | 80 Ltrs. S.S. 316 | 80 Ltrs. S.S. 316 | 80 Ltrs. S.S. 316 | 80 Ltrs. S.S. 316 | ||||||||||||||||||||
Wash Cycle : | 3 Inner + 1 Outer + 1 Air | 3 Inner + 1 Outer + 1 Air | 3 Inner + 1 Outer + 1 Air | 3 Inner + 1 Outer + 1 Air | ||||||||||||||||||||
Cycle Timing : | 3.5 Second for each wash + 1.5 second for traveling. | 3.5 Second for each wash + 1.5 second for traveling. | 3.5 Second for each wash + 1.5 second for traveling. | 3.5 Second for each wash + 1.5 second for traveling. | ||||||||||||||||||||
Water / Air Consumptions : | 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM | 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM | 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM | 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM | ||||||||||||||||||||
Machine Dimensions (In mm) : | 1150 x 2500 x 1550 | 1450 x 2500 x 1550 | 1450 x 2500 x 1550 | 2900 x 2500 x 1130 | ||||||||||||||||||||
Case Dimensions (In mm) : | 1400 x 3000 x 2000 | 1900 x 3000 x 2000 | 1900 x 3000 x 2000 | 3300 x 2500 x 2000 | ||||||||||||||||||||
Net Weight : | 1400 Kgs | 1600 Kgs | 1600 Kgs | 2400 Kgs | ||||||||||||||||||||
Gross Weight : | 2000 Kgs | 2200 Kgs | 2200 Kgs | 3000 Kgs | ||||||||||||||||||||
Change parts required : | (A) Neck Dia. Bottle holding pocket. (B) Flat Container Size: Delivery chute |
(A) Neck Dia. Bottle holding pocket. (B) Flat Container Size: Delivery chute. |
(A) Neck Dia. Bottle holding pocket. (B) Flat Container Size: Delivery chute. |
(A) Neck Dia. Bottle holding pocket. (B) Flat Container Size: Delivery chute. |
||||||||||||||||||||
Input Specifications | ||||||||||||||||||||||||
Container Size** : | Round Shape | (A) Ø 30 mm to Ø 65 mm *** (B) 58 mm to 190 mm*** (Height option for other bottle height available) (C) 20 to 55 Neck Diameter*** |
||||||||||||||||||||||
Flat / Square | (A) 30 mm to 100 mm (Length)*** (B) 10 mm to 50 mm (Width)*** (C) 58 mm X 190 mm (Height option for other bottle height available) |
|||||||||||||||||||||||
* Depends on bottle size. ** We can supply as per customer requirements. *** With help of change parts. |
MP Automatic Vertical Air Jet Cleaning Machine work on positive air pressure & vacuum cleaning. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body, consists of S.S. Slat Conveyor & Reciprocating cleaning nozzles. No container No cleaning system arrangement is standard features of the machine. The main drive of the machine and conveyor drive consist of A/c Motor with synchronized variable A/c Frequency Drive. |
Operation : |
Automatic Vertical Air Jet Cleaning Machine can accomplish a task by a photoelectric system, all the bottle should be cleaned before being filled, when an empty bottle arrives at the specified position, a cleaner comes down automatically until at the mouth of the bottle, then pure air is pressed into the bottle, and the impurity inside of the bottle is removed by vacuum system. This product conforms to the requirements of GMP completely. |
Salient Features :
Technical Specifications :
Auotmatic Measuring Dosing Cup Placement & Pressing Machine |
Automatic Measuring / Dozing Cup Placement & Pressing machine is highly efficient machine with elegant look, consists of conveyor, vibrator, feed worm, container holding star plate, & pressing plate. All the exposed parts of the unit are in S.S., chrome platted or cladded with S.S. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine. |
Operation : |
The feed container moving on conveyor belt are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the pressing plate, where the pressing plate press cup gradually & performing perfect operation of cup pressing. |
Salient Features :
Technical Specifications : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Automatic Vertical Sticker Labeling Machine MPASAL-150TF is one of the most users friendly. The machine is used for two sides labeling on flat surface of different size of flat container. It is capable to labeling up to 150 containers per minutes depending on products and label size. The automatic model is equipped with belt spacing device resulting in a simple to No change parts required. |
Operation : |
The round containers positioned & curate spacing between two containers by the belt spacing device and a belt drive mechanism hold the container from top of the container for two sides labeling on flat container at the labeling point, an electronics product sensor sense container & relies a label from self adhesive label roll. If machine is equipped with batch printing device in that case batch printing device prints the batch no. & other matter on label during label is stationary means time between sensing of two label. The sensed round container moves on conveyor sticker label at labeling point wrapped around to container. Then the labeled container moves further through a rubber pressing belt & stationary rubber pad that ensures neat & perfect fixing of label. |
Salient Features : |
|
Optional Features : |
|
Technical Specifications : | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The packing conveyor belt is having stainless steel table top with moving endless sandwich belt in the center. Tabletop is fixed to the same structure made out of SS square pipe & supported on adjustable bolts. Tabletop is of 12 inches working space on both side of the conveyor belt for final visual inspection & packing into the box. |
Operation : |
The conveyor belt brings the container or products from the labeling/blister/strip machine, operator in turn pickup These bottles/products & visually inspect the bottles/products & doing necessary action like primary packing, secondary packing, picking & placing at proper place. |
Salient Features : |
|
Optional Features : |
|
Technical Specifications : | ||||||||||||||||||||||||||||||||||||||||||||||||
|
Stainless steel scrambler & un scrambler, which is familiar as turn table. This is built on SS square frame, solid guide rail & reduction gear box for jerk less & noiseless performance. Turntable is useful to ensure total synchronization, uniform flow of container and to take a turn at 90 degree to suit different machine and purpose in automatic liquid line. |
Operation : |
Container inputs in turn table by manually or automatic will rotate on disk of turn table and exit through outlet, during rotation of container will guided by a SS strip, which will guide the container towards outlet path. |
Salient Features : |
|
Optional Features : |
|
Technical Specifications : | ||||||||||||||||||||||||||||||||||||||||||||||||
|
Inspection table is equipment consisting of a three-track conveyor with a hood with lighting arrangement and visual inspection background of alternate black & white color. Inspection table have stainless steel structure with moving S.S. slat chain. Structure made out of S. S. square pipe & supported on adjustable bolts. |
Operation : |
The central conveyor belt brings the bottle from the capping machine conveyor. These bottles are automatically bifurcated on the two adjoining conveyor belts & further on the side tables for operators sitting on either side of the table. The operators in turn pick up the bottles & visually inspect the bottles in the alternate white & black background to check for any particles in the liquid filled, sealed & breakage of bottle. After inspection the bottles are placed in the central track, which is transfer for labeling. |
Salient Features : |
|
Optional Features : |
|
Technical Specifications : | |||||||||||||||||||||||||||||||||||||||||
|
The pre-Inspection for empty bottle machine consisting of stainless steel structure with moving S.S. slat chain of width 3 in the center. Structure made out of S. S. square pipe & supported on adjustable bolts with magnified dome for pre-inspection. Is useful to inspect container online, without human touch which also reducing manual labours. |
Operation : |
The conveyor belt brings the bottle from the capping machine conveyor. These bottles are automatically bifurcated on the two adjoining conveyor belts (If two seated) & further on the side tables for operators sitting on either side of the table. The operators in turn visually inspect the bottles on magnifying dome to check for any partials in the liquid filled, sealed & breakage of bottle, and if found any problem manually reject the container. After inspection the bottles are ONLINE VISUAL BOTTLE INSPECTION transfered for further operation. |
Salient Features : |
|
Optional Features : |
|
Technical Specifications : | ||||||||||||||||||||||||||||||||||||||||||||
|
Used to apply sufficient pressure on valve-gasket before crimping to take care the variation up to +/- 0.5 mm in can heights Helps in crimping 1 aerosol valves on aluminum or tin cans, foot pedal. |
Features : |
We supply a semi-automatic crimping machines that provide 'Can push' operated-auto-return for positive crimping. Our crimping machines are known for their qualitative features like quick setting crimp-diameter, crimp-depth and auto-adjustment.
|
Used to apply sufficient pressure on valve-gasket before crimping to take care the variation up to +- 0.5 mm in can heights Helps in crimping 1 aerosol valves on aluminum or tin cans, foot pedal. FEATURES : We supply a semi-automatic crimping machines that provide Can push operated-auto-return for positive crimping. Our crimping machines are known for their qualitative features like quick setting crimp-diameter, crimp-depth and auto-adjustment. Suitable for all type of aerosol cans these are offered at economic prices. Operating air pressure: 6 to 8 kg. Sq. cm. Capacity: Approx.4000 UnitsShift. (Depending on operators skill)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T