Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

MP

Medi Pack Process Technologies
location Sardar Patel Ring Road, Ahmedabad, Gujarat

Write a Review
Call Now Call Now

Our Products

  1. Filling Line 16 Products available
  2. Filling Machines & Plants 3 Products available
  3. Labeling Machine 3 Products available
  4. Water Bottle 2 Products available
  5. Textile Machinery 2 Products available
  6. Powder Filling Machine 2 Products available
  7. Crimping Machines 2 Products available
  8. Cleaning Machine 2 Products available
  9. Packaging Machine 1 Products available
  10. Industrial Machinery 1 Products available
  11. Belts 1 Products available
  12. Tables 1 Products available

Water Bottle

We offer the best product range of Automatic Self Abhesive Two Side Flate Bottle and Automatic High Speed Linear Bottle.

Automatic Self Abhesive Two Side Flate Bottle

Automatic Self Abhesive Two Side Flate Bottle
The Automatic Vertical Sticker Labeling Machine MPASAL-150TF is one of the most users friendly. The machine is used for two sides labeling on flat surface of different size of flat container. It is capable to labeling up to 150 containers per minutes depending on products and label size. The automatic model is equipped with belt spacing device resulting in a simple to No change parts required.
Operation :
The round containers positioned & curate spacing between two containers by the belt spacing device and a belt drive mechanism hold the container from top of the container for two sides labeling on flat container at the labeling point, an electronics product sensor sense container & relies a label from self adhesive label roll. If machine is equipped with batch printing device in that case batch printing device prints the batch no. & other matter on label during label is stationary means time between sensing of two label. The sensed round container moves on conveyor sticker label at labeling point wrapped around to container. Then the labeled container moves further through a rubber pressing belt & stationary rubber pad that ensures neat & perfect fixing of label.

Salient Features :
  • High Production Speeds.
  • Suitable for any type of Flat Container.
  • Container hold from top for perfect & accurate labeling.
  • Stainless steel 304 construction.
  • GMP design.
  • Accurate label placement.
  • Full Security Package including counter.
  • Secondary pressure unit.
  • PLC with Soft Key Pad System.
  • Product data storage Facility.
  • No change parts requirements.
  • Very less down time for change over.
  • Suitable for Glass, Plastic, Pet, Tin, Corrugated containers.
Optional Features :
  • Online printing device.
  • Online inspection of batch no & printing.
  • Acrylic cabinet.
  • Servomotor instead of steeper motor.

Technical Specifications :
 
Model : MPASAL-150TF
Output/Hour : 3600 to 9000 Nos.
Direction of Movement : Left to Right
Electrical Specification** 0.25 HP, 230 Volts, 50 Hz
90 Watt, Gear Motor
6V DC / 40 Kgs. x 2 nos.
Height of Conveyor ** : 860 mm to 910 mm
Machine Dimensions ** : 2135 mm (L) x 1750 mm (W) x 1450 mm (H)
Case Dimensions : 2350 mm (L) x 1950 mm (W) x 1650 mm (H)
Net Weight : 450 Kgs.
Gross Weight : 750 Kgs.
Input Specifications
Label Specification : Length** 30 mm to 180 mm
Height** 16 mm to 100 mm
Space between two label Min. 3 mm in anti clock wise
Roll Diameter Max. 300 mm X ID 75 mm
Container Size** : Flat / Square 15mm to 100 mm (Length)
Respectively 10mm to 50 mm (Width)
Respectively height 58 mm X 240 mm
(Height option for other bottle height available)
* Depends on size, shape and Neck dia of container
** Can be supplied as per customer requirements.
*** With help of change parts.







View Complete Details
Ask Latest Price & Details
Automatic High Speed Linear Bottle

Automatic High Speed Linear Bottle

Automatic High Speed Linear Bottle Washing Machines

The MP High Speed Linear Bottle Washing Machine is most ideal for Round Bottles and finds wide application in PHARMA, FOOD & BEVERAGES INDUSTRIES. The automatic loading arrangement facilities loading of bottles on to SS wire mesh conveyor through feed conveyor or bottles are pushed manually from feed table. This saves manpower as bottles are feed into pockets automatically. The automatic unloading mechanism consists of unloading bottle continues on to Turn Table (Optional).
Operation :
Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. as per the rinsing requirement of bottle. All the pumps are made of SS and all the water contact parts are made of SS 316 on a heavy base of SS structure. In tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. Approved materials only are used for construction, together with a careful choice of components, thereby taking in to consideration all aspects of sanitation and consequence complying with the pharmaceutical G.M.P. requirements. The quality of rinsing is ensured through 3 sets of inner and 2 sets of outer nozzles accurately placed to direct the jet at center of the bottle and the bottle comes out with water totally drained with minimum droplets of water.

Technical Specifications :

Salient Features :

  • High-pressure spray nozzles ensure perfect wash of Bottles.
  • Interchangeable wash sequences.
  • Totally fabricated from SS Materials, including the basic frame.
  • No change parts required for washing of round bottle saving time of change over. (Change Parts require for Flat bottles & if change of neck size.)
  • All parts coming in contact with washing zones / jet are made from SS 316 materials.
  • The machine suitable for handling washes of round and flat glass bottle (With help of change parts).
  • Water re-cycling arrangement is possible as per customers need.
  • Machine is totally rigid and with stands continuous operation for long working. Hours without any trouble. Higher capacity centrifugal pump to wash bigger container.
  • Third Tank & pump can be fitted (optional).

Model : MPLBW-100 MPLBW-150 MPLBW-200 MPLBW-240
Out put / Hour* : 6000 bottles 9000 bottles 12000 bottles 14000 bottles
No. of Pocket Across : 10 12 16 20
Electrical Specification** :  
Main Motor 1 HP / 415 Volts / 50 Hz 1 HP / 415 Volts / 50 Hz 1 HP / 415 Volts / 50 Hz 1 HP / 415 Volts / 50 Hz
Pump Two Nos. 1 HP x 2 = 2 HP / 415 Volts / 50 Hz 1 HP x 2 = 2 HP / 415 Volts / 50 Hz 1 HP x 2 = 2 HP / 415 Volts / 50 Hz 1 HP x 2 = 2 HP / 415 Volts / 50 Hz
Electrical Heater 3 Kw. 3 Kw. 3 Kw. 3 Kw.
Conveyor 0.5 HP / 415 Volts / 50 Hz 0.5 HP / 415 Volts / 50 Hz 0.5 HP / 415 Volts / 50 Hz 0.5 HP / 415 Volts / 50 Hz
Tank Capacity : 80 Ltrs. S.S. 316 80 Ltrs. S.S. 316 80 Ltrs. S.S. 316 80 Ltrs. S.S. 316
Wash Cycle : 3 Inner + 1 Outer + 1 Air 3 Inner + 1 Outer + 1 Air 3 Inner + 1 Outer + 1 Air 3 Inner + 1 Outer + 1 Air
Cycle Timing : 3.5 Second for each wash + 1.5 second for traveling. 3.5 Second for each wash + 1.5 second for traveling. 3.5 Second for each wash + 1.5 second for traveling. 3.5 Second for each wash + 1.5 second for traveling.
Water / Air Consumptions : 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM
Machine Dimensions (In mm) : 1150 x 2500 x 1550 1450 x 2500 x 1550 1450 x 2500 x 1550 2900 x 2500 x 1130
Case Dimensions (In mm) : 1400 x 3000 x 2000 1900 x 3000 x 2000 1900 x 3000 x 2000 3300 x 2500 x 2000
Net Weight : 1400 Kgs 1600 Kgs 1600 Kgs 2400 Kgs
Gross Weight : 2000 Kgs 2200 Kgs 2200 Kgs 3000 Kgs
Change parts required : (A) Neck Dia. Bottle holding pocket.
(B) Flat Container Size: Delivery chute		 (A) Neck Dia. Bottle holding pocket.
(B) Flat Container Size: Delivery chute.		 (A) Neck Dia. Bottle holding pocket.
(B) Flat Container Size: Delivery chute.		 (A) Neck Dia. Bottle holding pocket.
(B) Flat Container Size: Delivery chute.
Input Specifications
Container Size** : Round Shape (A) Ø 30 mm to Ø 65 mm ***
(B) 58 mm to 190 mm***
(Height option for other bottle height available)
(C) 20 to 55 Neck Diameter***
Flat / Square (A) 30 mm to 100 mm (Length)***
(B) 10 mm to 50 mm (Width)***
(C) 58 mm X 190 mm
(Height option for other bottle height available)
* Depends on bottle size.
** We can supply as per customer requirements.
*** With help of change parts.












View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.