Model: MCP SD-09

ISO, CE Mark, WHO-GMP

Bed sores may occur, if a patient is lying on the bed for a long period of time, maybe he is hospitalized, ill or disabled to walk. The reason behind the bed soars is the continuous pressure, which is applied as particular body parts along with other factors such as humidity.

Bubble Air Mattress for bed sores prevention or bubble pad. We supply and export Bubble Type Anti Decubitis Air Mattress & Pump System, which has been designed for use at home, nursing home and hospitals for Medical use. Superior in quality and efficiency, the equipment is light in weight that makes it very easy to transport and makes very less noise while operating.

How to use Air Mattress For Bed Sores

STEP 1

Place the pump of air mattress on a flat table or hang it with the help of the hanger at the foot side.

Unfold & lay the air mattress on a foam mattress in a way that the connections are on the foot side. The excess ends on the leg side can be tucked under the foam mattress. On the head side excess air mattress can be used to make a pillow or can be tucked in.

STEP 2

Connect one end of the air tubes with the air pump and the other end with the air mattress. Connect them firmly at both the ends. Make sure that air pipes are not clinked.

STEP 3

Switch on the electric pump on the air mattress by connecting with 220-V AC. Green light will illuminate. The air mattress will start inflating. Keep the pressure adjusting Knob at full in the beginning. This will take around 10 minutes to inflate.

The pump should be constantly switched on during the usage otherwise the mattress will deflate.

After around 10 minutes A type bubbles will inflate rather B type will remain deflated starting the process. Adjust pressure ideally with the adjusting Knob in such a way that there is a two fingers gap between the deflated air bubbles and the patient.

STEP 4

To repack the mattress when not in use, you need to exhale the air out of the nozzles by pressing it from other side.

Precautions

Keep the electric pump of air mattress on for 23 hours and keep it off for 1 hour.

Do not use the air mattress near open flame or very near to a heater.

 Do not smoke near the air mattress

 Keep sharp objects away from the air mattress.

Do not stand on the air mattress. Maximum weight bearing capacity is 100 kgs therefore the attendants should not sit on the air mattress as this will cause the mattress to leak.

Keep the pump of the air mattress away from water/damp surfaces. Clean the mattress with mild detergent if required.

Model: MCP SD-09

ISO, CE Mark, WHO-GMP

Bed sores may occur, if a patient is lying on the bed for a long period of time, maybe he is hospitalized, ill or disabled to walk. The reason behind the bed soars is the continuous pressure, which is applied as particular body parts along with other factors such as humidity.

Bubble Air Mattress for bed sores prevention or bubble pad. We supply and export Bubble Type Anti Decubitis Air Mattress & Pump System, which has been designed for use at home, nursing home and hospitals for Medical use. Superior in quality and efficiency, the equipment is light in weight that makes it very easy to transport and makes very less noise while operating.

How to use Air Mattress For Bed Sores

STEP 1

Place the pump of air mattress on a flat table or hang it with the help of the hanger at the foot side.

Unfold & lay the air mattress on a foam mattress in a way that the connections are on the foot side. The excess ends on the leg side can be tucked under the foam mattress. On the head side excess air mattress can be used to make a pillow or can be tucked in.

STEP 2

Connect one end of the air tubes with the air pump and the other end with the air mattress. Connect them firmly at both the ends. Make sure that air pipes are not clinked.

STEP 3

Switch on the electric pump on the air mattress by connecting with 220-V AC. Green light will illuminate. The air mattress will start inflating. Keep the pressure adjusting Knob at full in the beginning. This will take around 10 minutes to inflate.

The pump should be constantly switched on during the usage otherwise the mattress will deflate.

After around 10 minutes A type bubbles will inflate rather B type will remain deflated starting the process. Adjust pressure ideally with the adjusting Knob in such a way that there is a two fingers gap between the deflated air bubbles and the patient.

STEP 4

To repack the mattress when not in use, you need to exhale the air out of the nozzles by pressing it from other side.

Precautions

Keep the electric pump of air mattress on for 23 hours and keep it off for 1 hour.

Do not use the air mattress near open flame or very near to a heater.

 Do not smoke near the air mattress

 Keep sharp objects away from the air mattress.

Do not stand on the air mattress. Maximum weight bearing capacity is 100 kgs therefore the attendants should not sit on the air mattress as this will cause the mattress to leak.

Keep the pump of the air mattress away from water/damp surfaces. Clean the mattress with mild detergent if required.