Gandhinagar, Gujarat, India
Our Products
Features of Laser Marking Machine Evan
EVAN laser provides a fast, flexible and efficient way to permanently mark a wide variety of materials such as Metals, Plastics, Ceramics, Silicon etc.
FeaturesFirst and last pulse equally useableBitmap marking compatible.High repeatability/stability design.Status monitoring and safe shut down.High speed marking (MHz repetition rate).Long using time : the average using time more than 100000 hoursGood stability and free maintenance : No need to maintenance for laser advice High quality gray scale marking
AdvantagesFiber lasers are up to ten times more efficient than traditional YAG or CO2laser systems. Consuming little to no energy when not 2 active, the annual energy saving can attract government grant funded energy efficiency programs for industry. Fiber lasers have no optic to adjust or align, and no lamp to replace. Maintenance is minimal and so utilization and up-times are maximized. The lasers really are designed as shop floor industrial tools.
| Model No | EVAN-10 | EVAN-20 | EVAN-30 | EVAN-50 | EVAN-100 |
| Output Power | 10 W | 20 W | 30 W | 50 W | 100 W |
| Wavelength | 1064 nm | ||||
| Power Adjustment | 0 to 100% | ||||
| Cooling | Air Cooled | ||||
| Min. Line Width | Min. 0.03 mm (Depend on Material) | ||||
| Max. speed | Max. 10000 mm/s (Max. Linear Speed) | ||||
| Marking Depth | 0.01~0.3mm (Depends on Material) | ||||
| Min Character Height | 0.5 mm | ||||
| Marking Range | 145 mm X 145 mm(Standard) Optional : 175 X 175 mm & 300 X 300 mm |
||||
| Supporting Format | Support PLT, DXF, BMP File etc., Using SHX TTF Character Storage Directly | ||||
| Single Pulse Energy (mj) | 0.5@20KHz | 1.0@20KHz | 1.0@30KHz | 1.0@50 KHz | 2.0@50 KHz |
| Repetition Frequency Range | 20-80 KHz | 20-80 KHz | 30-80 KHz | 50-100 KHz | 50-100 KHz |
| Output Power Stability | <3% | ||||
| Beam Quality(M ) | < 1.5 | < 1.8 | < 2.0 | ||
| Pulse Width(ns) | < 100@20 KHz | < 130@20 KHz | < 200@50 KHz | ||
| Power Supply | AC 220 Volt | ||||
| Max Power Consumption | 120 Watt | 200 Watt | 250 Watt | 300 Watt | 500 Watt |
| Specifications are subject to change without notice |
|||||
Features of Elita-480
X, Y Axis adopt round rail and belt transmission to make machine more stableStable and full equipped design concept, equipped with advanced industrial cooling system with anhydrous alarm automatic protection system, improve the stability and safety of continuous work. Full-equipped dust, anti pollution exhaust system, more attention to environmental protection.
Perfectly Cutting Material
30 mm Acrylic10 mm MDF
EMMA laser provide a fast, flexible and efficient way to permanently mark a wide variety of materials such as, metals, plastics, ceramics and silicon.EMMA lasers are commonly used for identification and traceability marks such as serial numbers, date codes, manufacturers info, material flow, barcodes, 2D data matrix, logos, graphics & more.EMMA fiber lasers can be easily integrated into tabletop marking system automated manufacturing cells, and customized multi-axis machine tools. Depending on the specific application requirements.
FeaturesFirst and last pulse equally useable.Bitmap marking compatible.High repeatability/stability design.Status monitoring and safe shut down.High speed marking (MHz repetition rate).Long using time : the average using time more than 80000 hours.Good Stability and free maintenance : No need to Maintenance for laser device.
The flexibility of the RM/HS series addresses multiple laser marking and micro-machining applications across a wide range of industries. Performance is particularly good for the following :
Auto partsPackagingHardwareSolar IndustryWatch & ClockMedical DeviceMarking on anodized & painted materialsMarking on Metal & Plastics
| Model No | ETAN-12 | ETAN-20 | ETAN-25 | ETAN-30 |
| Laser average output power | 12 W | 20 W | 25 W | 30 W |
| Wavelength | 1064 nm | |||
| Output Power Stability (Typical) | 5% | 2% | ||
| Power Adjusting Range |
1 ~ 100 % |
|||
| Resolution Frequency | 25-200 KHz | 30-200 KHz | ||
| Beam Quality (M²) | < 2 | < 3 | ||
| max. Linear Speed | 7000 mm/s | |||
| Marking Depth | 0.01~0.5 mm (Material Depended) |
0.01~1.0 mm (Material Depended) |
||
| Red Alignment Laser | Yes | |||
| Min. Line Width | 0.03 mm | |||
| Marking Area | 145 x 145 (standard) 175 x 175 / 300 x 300 (Optical) | |||
| Anti High Reflect | With Optic Isolator | |||
| Min. Character Height | 0.2 mm | |||
| Repetition Accuracy | 0.2 µm | |||
| Marking Format | Figure, Characters, Barcode, Data matrix, Data, Order of runs, Lot number, Serial number, File chaining | |||
| Marking character Type | Support PLT, DXF, BMP file etc.,using SHX TTF character storage directly | |||
| Cooling system | Air Cooling System | |||
| Ambient Temperature Range | 0°C top + 45°C | |||
| Marking Method | Static or Flying Marking | |||
| Power Supply | 220V / 50Hz | |||
| Specifications are subject to change without notice |
||||
ETAN laser provides a fast, flexible and efficient way to permanently mark a wide variety of materials such as Metals, Plastics, Ceramics and Silicon.
First and last pulse equally useableBitmap marking compatibleHigh repeatability/stability designStatus monitoring and safe shut downHigh speed marking (MHz repetition rate)Long using time : the average using time more than 100000 hoursGood stability and free maintenance : No need to maintenance for laser adviceHigh quality gray scale marking
High Marking Speed
Perfect beam quality
Very Compact
Low Consumption
Maintenance Free
Fiber lasers are up to ten times more efficient than traditional YAG or CO2 laser systems. Consuming little to no energy when not active, the annual energy saving can attract government grant funded energy efficiency programs for industry.Fiber lasers have no optic to adjust or align, and no lamp to replace. Maintenance is minimal and so utilization and up-times are maximized. The lasers really are designed as shop floor industrial tools.
| Auto Parts | Packaging |
| Hardware | Solar Industry |
| Watch & Clock | Medical Device |
| Marking anodized & painted material | Marking Metal & Plastics |
| Serial Numbers | Data Codes |
| Manufactures Information | Materials Flow |
| Barcodes | 2D Data Matrix |
| Logos | Graphics |
| Model No | ETAN-12 | ETAN-20 | ETAN-25 | ETAN-30 |
| Laser average output power | 12 W | 20 W | 25 W | 30 W |
| Wavelength | 1064 nm | |||
| Output Power Stability (Typical) | 5% | 2% | ||
| Power Adjusting Range |
1 ~ 100 % |
|||
| Resolution Frequency | 25-200 KHz | 30-200 KHz | ||
| Beam Quality (M²) | < 2 | < 3 | ||
| max. Linear Speed | 7000 mm/s | |||
| Marking Depth | 0.01~0.5 mm (Material Depended) |
0.01~1.0 mm (Material Depended) |
||
| Red Alignment Laser | Yes | |||
| Min. Line Width | 0.03 mm | |||
| Marking Area | 145 x 145 (standard) 175 x 175 / 300 x 300 (Optical) | |||
| Anti High Reflect | With Optic Isolator | |||
| Min. Character Height | 0.2 mm | |||
| Repetition Accuracy | 0.2 µm | |||
| Marking Format | Figure, Characters, Barcode, Data matrix, Data, Order of runs, Lot number, Serial number, File chaining | |||
| Marking character Type | Support PLT, DXF, BMP file etc.,using SHX TTF character storage directly | |||
| Cooling system | Air Cooling System | |||
| Ambient Temperature Range | 0°C top + 45°C | |||
| Marking Method | Static or Flying Marking | |||
| Power Supply | 220V / 50Hz | |||
