GST : 07AASFM3267H1ZV
4.6/5
Our Products
Our product range contains a wide range of Rubber Bellow Seals, Mechanical Slurry Seals, PTFE Bellow Seals, Balanced Single Coil Spring Seals and Unbalanced O Ring Seal
Series Meqe200 Is Single Coil Spring Seal With Rubber Bellow Mainly For Use In Waste Water Treatment Plants In The Sewage Application . The Rubber Bellow Protects The Shaft / Sleeve From Fretting. The Bellows Is Not Subjected To Any For Signal Stress. Torque Transmission Is Through The Spring And Spring Holder. Self Aligning Features Accommodate Abnormal Shaft Run Out And Primary Sealing Wear. The Single Coil Spring Will Avoid Effluents.
Seal Characteristics
Applications
Performance Range
| Shaft Diameter | 10…100mm |
|---|---|
| Pressure | 10 bar (max) |
| Temperature | -20…..1800C |
| Velocity | 15 m/sec |
Material
| Seal faces | Carbon, Ceramic, Sic, Tung, Carbide |
|---|---|
| Metal Parts | SS304, SS316 |
| O-rings | Elastomers, TTV |
Our prime concern is to fulfill variegated requirements of the clients, all the time. And, to achieve this objective, we have installed a capacious warehouse. Well documented, secure, and practical, our payment procedures are client friendly. We offer our clients with different online and traditional options to make payments and ensure they are convenient.
Series Meqe202 & Meqe203 Are External Mounted Seal Designed For Extremely Corrosive Application Such As Acids, Salts, Organic Compounds And Reducing Agents. All Materials Coming In Contact With The Liquid Are Made Of Chemically Inert Material. Metallic Components Are Isolated From The Liquid.
Series Meqe202 : Seal Faces Not Replaceable. Glass Field Ptfe Face Is Composite Molded With Flexible Ptfe Bellow.
Series Meqe203 : Seal Faces Are Replaceable And Can Be Supplied With Hard Materials Suitable For Abrasive Services.
Seal Characteristics
Applications
Performance Range
| Shaft Diameter | 18…100mm |
|---|---|
| Pressure | 6 bar (max) |
| Temperature | -45…..1200C |
| Velocity | 20 m/sec |
Material
| Seal faces | GFT, SIC, Ceramic |
|---|---|
| Metal Parts | SS304, SS316, Hast - C |
| PTFE Bellows | - |
Series Meqe3oob Is Single Coil Spring Seal Developed For Light Contamination, Dirty Media And Clogging Type Application. These Type Also Allows It To Fit Onto A Normal Shaft Without Any Balancing Step. The Mechanical Drive Of This Seal Is Realized By Grub Screw Which Lock Onto The Shaft. The Seal Has A Limited Axial Length Compact Shape Which Allows Easy Mounting.
Seal Characteristics
Applications
Performance Range
| Shaft Diameter | 10…100mm |
|---|---|
| Pressure | 30 bar (max) |
| Temperature | -20…..1800C |
| Velocity | 15 m/sec |
Material
| Seal faces | Carbon, Ceramic Sic,Tung, Carbide |
|---|---|
| Metal Parts | SS304, SS316 |
| O- ring | Elastomers, PTFE |
Microtech Engineering is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively. These seals can carry a variety of seals faces, serving application in submersible, sewage, chemical transfer, water pumps etc. Seal Characteristics Single Seal Unbalanced Conical spring Dependent on directions of rotation Application Water pumps Submersible pump Sewage pump Performance Range Shaft Diameter dl : 10.100mm Pressure p : 10 bar (max) Temperature t : -20.1800C Velocity v : 10 msec Materials Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide Metal Parts : SS304, SS316 O-rings : Elastomers, TTV
Series Meqe800 Are Preset Factory Assembled Cartridge Seals For Use In Agitators , Mixers And Reactor Vessels. The Seals Construction Very Slightly For Top Entry Vessels, Side Entry Vessels And Bottom Entry Vessels. The Seal Are Designed To The Shortest Shaft Length And The Bearings Are Located As Close To The Vessel Body To Minimize The Deflection.
Seal Characteristics
Applications
Performance Range
| Shaft Diameter | 25…150mm |
|---|---|
| Pressure | Vacuum ….. 40 bar (max) |
| Temperature | -20…..2200C |
| Velocity | 4 m/sec |
Material
| Seal faces | Carbon, Sic,Tung, Carbide |
|---|---|
| Metal Parts | SS316, Hastelloy -C, Alloy 20 |
| O- ring | Elastomers, PTFE |
Mr. Mahtab Khan (Microtech Engineering)
L-89, Near Bharat Shakti Public School, Krishna Vihar, delhi - 110086, India
Share us via
