Ambala, Haryana, India
Our Products
Our offered Product range includes Seed Germinator Double Chamber, Seed Germinator Single Chamber, CAGE METABOLIC, Rabbit Holder and Tissue Culture Hood.
SEED GERMINATOR DOUBLE CHAMBER: JST-2 Seed Germinator Double Chamber has specifications same as double chamber and also consists of following points:- Each chamber size : 555 (W) x 910 (H) x 605 (D) mm. For cooling (Low temp.) 5°C to 50°C ± 1°C a sealed compressor unit has been provided to work independently below the chamber. JST – 2A : Heating & Cooling in separate chambers. JST – 2B : Heating & Cooling in both chambers. Optionals : Digital temp. indicator-cum-controller with computer data logger Automatic 0-24 hrs Timer to regulate cyclic illumination conditions Chart recorder Automatic voltage stabilizer – 3 KVA (Must)
Seed Germinator Single Chamber : Suitable for conducting various experiments on seed germination. Different environmental conditions can be created and controlled as per requirement. Double walled construction, inner made of stainless steel sheet and outer made of mild steel sheet duly finished in powder coated paint. Temperature range 5°C above ambient to 50°C ± 1°C controlled by Digital Indicator & Controller. Humidity is created in a stainless steel chamber by heating water by an immersion heater from ambient to 95% ± 3% RH controlled by a humidistat. A full – view inner acrylic door and double walled outer door with magnetic gaskets is provided. Inner chamber is provided with fluorescent illumination to create photo-stimulation. An air-circulating fan has been provided to maintain uniform temperature in the total chamber. Supplied complete with 14 adjustable perforated trays, pilot lamps, on-off switch other control switches, cord plug to work on 220V AC 50Hz single phase. Chamber size : 555(W) x 910(H) x 650(D) mms. 710(W) x 455(H) x 455(D) mms. Optional : Digital temp. indicator-cum-controller with computer data logger
This metabolic cage is used for the efficient collection of urine and feces from a single mouse. The smaller chamber volume and collection tube design minimize evaporations. The funnel and cone design with steeper angle separates urine and feces into separate collection tubes. Floor Area : 200 cm2 (31 in.2) Chamber Volume : 2600 cm3 (159 in.3) Dimensions Cage : 32L x 25W x 36.5H cm Vertical Support Rack : 126L x 50W x 187H cm Horizontal Support Rack : 178L x 63W x 129H cm
Rabbit Holder (Wooden): Wooden, box-type, front top lid opening, air-window push system and neck holding arrangement.
Item code: JCA-06 Tissue Culture Hood/Aseptic Cabinet is an elegant equipment with overall dimensions 1220 x 610 x 610 mm having front horizontal swing door opening of 1050 x 405 mm (frame) fitted with transparent plexiglass. Complete with fluorescent lighting and germicidal ultra violet tube. Additional Information: Item Code: JCA-06
LABORATORY MILL : P-L1 Laboratory Mill (Willey type) : For preparation of samples for analysis with minimum loss of moisture of volatile constituents. Weight distribution and balancing of rotating parts has been adjusted to provide greater stability and quieter performance with reduced vibration. Suitability for wider variety of commercial materials. fitted with 1/4 HP motor, supplied with nickel plated hopper of 50 mm diameter with cover, three delivery sieves, having tops of 20, 40 and 80 mesh respectively, with plastic receiver, brush, L-N key, cord and plug. Suitable to operate on 220V, 1 Phase, 50 Cycles AC supply. Additional Information: Item Code: P-L1
MEMBRANE FILTER HOLDER : P-M3 Diameter 25 / 47 mm Buchner funnel of stainless steel Vacuum flask of borosilicate glass Membrane Filter Holder, With Neoprene Lid and Stopper, C-type Handle-clamp. Membrane Filter Holder, With SS Lid with vent, C-type Handle-clamp. Membrane Filter Holder, With Neoprene Lid and Stopper, SS Duck Clamp. Additional Information: Item Code: P-M3
ELECTRO CONVULSOMETER : EM-31 Electro Convulsometer: The instrument provides 50Hz stimulus current which can be adjusted 0.15mA to 330mA in discrete steps for producing minimal and supra maximal seizures required in the assaying of anti-epileptic and anticonvulsant drugs. The application of stimulus current can be controlled by an electronic timer from 0.1 second to 1 second in steps of 0.1 to 3 seconds in 11 steps. An L.E.D. indicates the duration of stimulus.
Plasma Extractor is designed to express. Blood components from blood collection bags. The Main bag is to be placed between the fixed stainless steel and movable transparent plate where the power spring load provides pressure to transfer the fluid into designated satellite bag. Additional Information: Item Code: JRS-B5
Humidity is created in a stainless steel chamber by heating water by an immersion heater from ambient to 95% - 3% RH controlled by a Humidistat. A full - view inner acrylic door and double walled outer door with magnetic gaskets is provided. Inner chamber is provided with fluorescent illumination to create photo-stimulation. An air-circulating fan has been provided to maintain uniform temperature in the total chamber.
We are the main supplier of this product.
Color | Red |
Brand | Teknik |
Material | MS/SS |