Wires #298959

Used with thin and uniform coating for continuous welding on unalloyed and structural steel.

Brand : BHARAT MAG

* BHARAT MAGwiresis double Deoxidized. Mn-Si Alloy wire.

• It gives good electrical contact and protection against weathering, corrosion due to light , uniform, bright, smooth copper coating produced over the surface of the wire by a special process.
• It gives spatter free welding with CO2 gas and Argon-Carbn dioxide gas mixture.
• Product is supplied with controlled tensile strength of the wire and helix to ensure resistance free continuous wire feeding.

These wires are shaped wires manufactured from Low Carbon steel/ High Carbon steel as per customers specific requirement in flat, Half round and triangular shapes.

The Profile wires can be adjusted to meet customers actual needs. The wires can be supplied in annealed and drawn finish.

The profile wire is generally supplied in 450/500 ID Coils in coil weight of 40 to 120 kgs. In specific case for small cross section of wires, it can be reduced to 30 kgs. The coil weight can be controlled to meet specific customers requirements.

The coils are packed with Polythene & Hessian and oiling is done wherever specified by customer.

We specialize in supplying Bearing wires to customers actual needs.

For all your requirements, kindly contact any of our following offices along with complete technical specification desired.

These wires are cold drawn made from unalloyed high carbon steel.

Used in manufacturing of cold-formed helical springs, spring rings and wires forms which find application in automobile, cycle and other industrial equipments.

The wire are generally supplied in Phosphated drawn with or without anti rust oil coating or as desired by the customer.

The wire is packed with Polythene and Hessian/HDPE or as per customer’s need.

We specialize in supplying Cable Armouring wires to customer’s actual needs.

These wires are High Carbon Annealed Bright drawn wires.

The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene and Hessian/HDPE.
We specialize in supplying needle wires to customer’s actual needs.

These are Galvanized Mild steel wires in round and formed sections used for armouring of all grades of electric cables. These wires prevent the cable from getting damaged during digging, provide strength to the cables and some times used as earth wire.

Used in armouring of land cables.

Round Wire: Min. 0.90 MM , Max. 4.00 MMFormed Wire: 4.0 x 0.8 MM, 6.10 x 1.4 MM

The coils are normally supplied in unoiled condition with Polythene & Hessian/ HDPE or as per customers requirement.

We specialize in supplying Cable Armouring wires to customers actual needs.

These wires are patented Galvanized drawn wires, manufactured from High Carbon Steel.

Used in manufacturing of auto-cables, steel wire Ropes, cold-formed helical spring and wire forms.

Min. 0.30 MM, Max. 2.85 MM

We supply these wires as per IS 4454 (PART-1), Gr. II & I and IS 1835 or as per customers requirements according to their actual needs.

Galvanized Spring steel wires are normally packed with Polythene/Polythene & hessian cloth.

We specialize in supplying Cable Armouring wires to customers actual needs

These wires are supplied in coils with Phosphated coating to facilitate cold heading operation.

Grade EN31 / SAE 52100 (Carbon 0.98 1.10 % and Chromium 1.30 1.60%).Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed.
All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customers specification.

These are Mild Steel Galvanized wires used for general engineering purpose.

APPLICATION :

Used in manufacturing Wire netting, Wire mesh, Fencing, Barbing, Agriculture, Irrigation, Prevention of soil erosion, as well as other general applications.

SIZE RANGE :

Min. 0.90 MM, Max. 5.00 MM

PACKING :

The coils are normally supplied in unoiled condition with Polythene & Hessian/ HDPE or as per customers requirement.

We specialize in supplying Cable Armouring wires to customers actual needs

These wires are shaped wires in Square, Rectangular or Trapezoidal section manufactured from High Carbon steel generally conforming to EN 42 B/EN42 J/ 60-.80 C grade.

The wires are custom built for the taper required.

• The spring washer wire are supplied in coils of 450/500 mm ID with coil weight of 40 to 150 Kgs depending on the sizes. The weight can be adujusted to meet specific customer’s requirement.
•  
• The wires are oiled anr packed with polythene and hessian
• We specialize in supplying Spring washer wires to customer’s actual needs.