FACILE Reusable Tile Leveling System1.5mm Thickness with SS pin 50 PCS Kit With Special Wrench 1 PCS 100% REUSABLE Tile Leveling System For Tiles/Stone Installation Flooring / Wall DIY (Orange/Black Colour)-mm2mm Products

MATERIAL--High-strength PP material and high-quality stainless steel, It is not easy to be damaged if stepped on by mistake. quantity 1 pkt 50 pcs Product Type : Marble / Stone / Tile / Glass upto 15mmThk. Material : Plastic /SS Sipn Manufacturer Details : MM2MM Produvcts Net weight: 640grm

PRODUCT CONTAINS--1 forehand and backhand wrenches, 50 tile levelers, and 50 1.5mm steel pins
ERGONMIC DESIGN--Break through the shortcomings of the traditional leveling device for one-time use, It can be reused, and there is no debris left in the tile gap! The tile leveling system can make your tile surface level, Even gaps, and higher efficiency!

High Quality - Tile levelers made from semi-crystalline thermoplastic with high impact resistance, and the steel part is made from stainless steel with a thickness of 1.5 mm. Tile levelers can increase the speed of tile installation and reduce the fatigue/stress of the installer.

Easy To Operate - Tile Leveler are water-resistant and reusable. And this new system doesn't require any tools unless you need to tighten very hard, and the special wrench is included. It is easy enough to fix or remove with the wrench to improve tile installation speed. Suitable for 5 mm to 15 mm thickness of the tile, but can be used with tiles up to 15 mm thickness.

Reusable & Easy To Use - When leveling, the steel needle is adjusted to a straight line to insert into the gap of the tile, rotates left and right to clean the surrounding cement, and the rotation is fixed to the bottom of the 2 tiles; Then use a T-wrench to turn the black cover so that the 2 tiles are on the same level. Wait 4-6 hours to get Adhesive Gred of tiles. When removing the steel needle, you can first press the needle down to reduce the frictional resistance between it and the tile.

FACILE Tile Leveling System Spiral Kit Reusable Tile Leveler Needle Thickness 1.5mm Tile Tools(Orange Cap - 50pcs & White base-100pcs)- MM2MM PRODUCTS

The use of screw levelers to level ceramic tiles, in addition to aligning and observing the distance between the joints, has other advantages in terms of increasing the execution speed, not using tools such as aligners and hammers.

The product of screw leveling ceramic tiles consists of two pieces of clips and wedges. The screw leveling clip consists of two parts perpendicular to each other. The horizontal part of the floor of the clip is in the form of a flat plate that is placed under the tiles, and the vertical part of the leveling of the screw tile is also like a spiral bar (screw). The wedge-level tile wedge is also like a circular round cap with a bead-like shape at the top so that it can be fastened to the clip like a bead.

Feature: Virtually lippage free, flat surface drastically Keep titles in place while drying Prevents tiles from moving while curing Reduce installer fatigue/stress Improve title installation speed Very simple and easy to use, save time and money

Note: 1. Reusable caps can use multiple times depend on the usage. 2. The cement must completely dry before removing the bases and caps, otherwise there will be easily appeared flatness error. 2. Clean the cap after each use.

FACILE Tile Leveling System Spiral Kit Reusable Tile Leveler Needle Thickness 1.5mm Tile Tools(Orange Cap - 50pcs & White base-100pcs)- MM2MM PRODUCTS

The use of screw levelers to level ceramic tiles, in addition to aligning and observing the distance between the joints, has other advantages in terms of increasing the execution speed, not using tools such as aligners and hammers.

The product of screw leveling ceramic tiles consists of two pieces of clips and wedges. The screw leveling clip consists of two parts perpendicular to each other. The horizontal part of the floor of the clip is in the form of a flat plate that is placed under the tiles, and the vertical part of the leveling of the screw tile is also like a spiral bar (screw). The wedge-level tile wedge is also like a circular round cap with a bead-like shape at the top so that it can be fastened to the clip like a bead.

Feature: Virtually lippage free, flat surface drastically Keep titles in place while drying Prevents tiles from moving while curing Reduce installer fatigue/stress Improve title installation speed Very simple and easy to use, save time and money

Note: 1. Reusable caps can use multiple times depend on the usage. 2. The cement must completely dry before removing the bases and caps, otherwise there will be easily appeared flatness error. 2. Clean the cap after each use.

Leveling System is an innovative product that will greatly assist most anyone in the installation of stone, ceramic, marble, granite and large format slab tiles. It is designed to create a virtual lippage free installation when used on floors or walls. The system interlocks the tiles, virtually creating a single flat slab surface while the setting material is curing. The interlocking design of the system reduces and in most cases eliminates settling from shrinkage, as well as minimizing the possibility of warping. The system reduces the need to re-lift tiles to add more mud and/or the process of shimming tiles thus greatly increasing the speed of installation, all the while creating that much-desired lippage free mirror surface. In addition, the caps are reusable dozens of times.

FACILE Reusable Tile Leveling System1.5mm Thickness with SS pin 50 PCS Kit With Special Wrench 1 PCS 100% REUSABLE Tile Leveling System For Tiles/Stone Installation Flooring / Wall DIY (Orange/Black Colour)-mm2mm Products

MATERIAL--High-strength PP material and high-quality stainless steel, It is not easy to be damaged if stepped on by mistake. quantity 1 pkt 50 pcs Product Type : Marble / Stone / Tile / Glass upto 15mmThk. Material : Plastic /SS Sipn Manufacturer Details : MM2MM Produvcts Net weight: 640grm

PRODUCT CONTAINS--1 forehand and backhand wrenches, 50 tile levelers, and 50 1.5mm steel pins
ERGONMIC DESIGN--Break through the shortcomings of the traditional leveling device for one-time use, It can be reused, and there is no debris left in the tile gap! The tile leveling system can make your tile surface level, Even gaps, and higher efficiency!

High Quality - Tile levelers made from semi-crystalline thermoplastic with high impact resistance, and the steel part is made from stainless steel with a thickness of 1.5 mm. Tile levelers can increase the speed of tile installation and reduce the fatigue/stress of the installer.

Easy To Operate - Tile Leveler are water-resistant and reusable. And this new system doesn't require any tools unless you need to tighten very hard, and the special wrench is included. It is easy enough to fix or remove with the wrench to improve tile installation speed. Suitable for 5 mm to 15 mm thickness of the tile, but can be used with tiles up to 15 mm thickness.

Reusable & Easy To Use - When leveling, the steel needle is adjusted to a straight line to insert into the gap of the tile, rotates left and right to clean the surrounding cement, and the rotation is fixed to the bottom of the 2 tiles; Then use a T-wrench to turn the black cover so that the 2 tiles are on the same level. Wait 4-6 hours to get Adhesive Gred of tiles. When removing the steel needle, you can first press the needle down to reduce the frictional resistance between it and the tile.

FACILE Tile Leveling System Spiral Kit Reusable Tile Leveler Needle Thickness 1.5mm Tile Tools(Orange Cap - 50pcs & White base-100pcs)- MM2MM PRODUCTS

The use of screw levelers to level ceramic tiles, in addition to aligning and observing the distance between the joints, has other advantages in terms of increasing the execution speed, not using tools such as aligners and hammers.

The product of screw leveling ceramic tiles consists of two pieces of clips and wedges. The screw leveling clip consists of two parts perpendicular to each other. The horizontal part of the floor of the clip is in the form of a flat plate that is placed under the tiles, and the vertical part of the leveling of the screw tile is also like a spiral bar (screw). The wedge-level tile wedge is also like a circular round cap with a bead-like shape at the top so that it can be fastened to the clip like a bead.

Feature: Virtually lippage free, flat surface drastically Keep titles in place while drying Prevents tiles from moving while curing Reduce installer fatigue/stress Improve title installation speed Very simple and easy to use, save time and money

Note: 1. Reusable caps can use multiple times depend on the usage. 2. The cement must completely dry before removing the bases and caps, otherwise there will be easily appeared flatness error. 2. Clean the cap after each use.

FACILE Tile Leveling System Spiral Kit Reusable Tile Leveler Needle Thickness 1.5mm Tile Tools(Orange Cap - 50pcs & White base-100pcs)- MM2MM PRODUCTS

The use of screw levelers to level ceramic tiles, in addition to aligning and observing the distance between the joints, has other advantages in terms of increasing the execution speed, not using tools such as aligners and hammers.

The product of screw leveling ceramic tiles consists of two pieces of clips and wedges. The screw leveling clip consists of two parts perpendicular to each other. The horizontal part of the floor of the clip is in the form of a flat plate that is placed under the tiles, and the vertical part of the leveling of the screw tile is also like a spiral bar (screw). The wedge-level tile wedge is also like a circular round cap with a bead-like shape at the top so that it can be fastened to the clip like a bead.

Feature: Virtually lippage free, flat surface drastically Keep titles in place while drying Prevents tiles from moving while curing Reduce installer fatigue/stress Improve title installation speed Very simple and easy to use, save time and money

Note: 1. Reusable caps can use multiple times depend on the usage. 2. The cement must completely dry before removing the bases and caps, otherwise there will be easily appeared flatness error. 2. Clean the cap after each use.

Leveling System is an innovative product that will greatly assist most anyone in the installation of stone, ceramic, marble, granite and large format slab tiles. It is designed to create a virtual lippage free installation when used on floors or walls. The system interlocks the tiles, virtually creating a single flat slab surface while the setting material is curing. The interlocking design of the system reduces and in most cases eliminates settling from shrinkage, as well as minimizing the possibility of warping. The system reduces the need to re-lift tiles to add more mud and/or the process of shimming tiles thus greatly increasing the speed of installation, all the while creating that much-desired lippage free mirror surface. In addition, the caps are reusable dozens of times.