Mumbai, Maharashtra, India
Our Products
Use high frequency sound waves to create bubbles for loosening and removing dirt, scale and other impurities from Industrial parts washers remove grease, soil, oil, abrasive dust, blast debris, swarf, paint, corrosion or other contaminants from the surfaces of components exiting a production line.
High efficiency ultrasonic make the most modern cleaning system possibleAn ultrasonic cleaner relies on a process called cavitation to gently and thoroughly clean the surface of your parts. An ultrasonic transducer attached to the cleaning tank transmits high frequency (30 khz) sounds into the cleaning solution. During the low pressure stage of each sound wave tiny bubbles form and grow. During the high pressure stage these bubbles collapses, removing dirt, rust and other contaminants. This cleaning action can reach any exposed surface, even into deep crevices.
Ultrasonic cleaning and vapour rising, Continuous vapour rising & Re- circulation. 2/3/4 stage cleaning and vapour degreasing system ideal for in-line operation. Removing oil, grease, buffing, compounds etc. High productivity solvent loses minimal compact designs. Some of typical Manufacturing soils and coating removed by this modern method are:
Waxes, Silicon and Cutting Fluids, Heat scale and Burnt-on Deposits. Photo-Resist, Lacquer, Shellac and Print. Flux Residues, Resins, Asphaltic Materials, Adhesives and Gum.
| Type of Model No. |
Cleaning Tank (Internal) Measurement (LxWxH) NCH |
Connected Power Watts (AVG) |
Capacity Litres |
Khz |
| MU - 500/ H / S | 12 x 12 x 15 | 500W | 20 | 20/30 |
| MU - 600/ H / S | 18 x 13 x 8 | 600W | 30 | 20/30 |
| MU - 750/ H / S | 15 x 15 x 18 | 750W | 35 | 20/30 |
| MU -1 k./ H / S | 18 x 18 x 20 22 x 20 x 16 |
1000W | 100 | 20/30 |
| MU-1.5 k./H/S | 24 x 24 x 18 20 x 20 x 24 22 x 22 x 20 |
1500W | 150 | 20/30 |
| MU - 2 k./ H / S | 30 x 20 x 20 22 x 22 x 28 24 x 24 x 24 |
2000W | 200 | 20/30 |
| MU - 2.5 k./ H / S | 28 x 24 x 24 34 x 22 x 22 |
2500W | 250 | 20/30 |
