Camprofile Gasket is a two-part seal comprising of a precision machined grooved metal core which takes the bolt loading, resulting in extremely high pressure loading, giving excellent deformation and sealing properties - together with a soft sealing material bonded to either side of the core. These materials prevent damage to the flange and fill any surface irregularities.  Camprofile gaskets are primarily used in heat transfer applications. It offers a safe, effective seal under the most exacting conditions on both standard pipe work and specialist applications in a wide range of sizes and configurations. Camprofile gaskets are often selected to replace Metal Jacketed Gaskets. Camprofiles can be used without sealing layers although this provides an excellent seal, there is risk that the flange surface is inclined to damage especially at high seating loads, which is the reason we recommend Camprofiles with sealing layers to ensure protection to the flange surfaces from damage in addition to providing an effective seal.

Metal jacketed gasket Aiflon Metal Jacketed gasket(MJG)is made from graphite, ceramic, non-asbestos etc. Filler covered with thin metal jacket, such as stainless teel, carbon steel, copper etc., special used in sealing spots of heat exchanger, pressure vessel etc. This gaskets highly resistance against blow-out, suitable for high assembly stress 6200DJ Double Jacketed plain gasket 6200DC. Double Jacketed corrugated gasket 6200H DJG for Heat Exchanger 6200S DJG with special shape Filler material Jacket meterial Temperature Pressure.  Graphite, Asbestos  Non-asbestos  Ceramic PTFE Carbon steel 300 6.4  Copper 400 6.4  3.4 316 530 6.4

You won't get any sharp edges or burrs with MGP Pre-Cut Alignment Tab Shims. Made from corrosion resistant 304 stainless steel, MGP tab shims eliminate the need to hand-cut extra shims and MGP tab shims are totally reusable. Order a tab shim kit equipped with a wide range of shim sizes and reduce the need to stack. MGP stocks regular and over-sized slots in A, B, C and D sizes.  Custom sizes AA, E, G and H are available - all up to 1/2" thick. Having the right size shim will save you time and money, and more importantly, will provide you with a more stable alignment.  Laminated Shims   Comprised of .002" or .003" layers of metal foil, laminated shims are coated with a very thin adhesive, then compressed and bonded together into a single, solid sheet. When the sheets are cut into shims, the resultant parts are ideal for the aeronautical, armament, shipbuilding, compressor and many other industries. Because individual layers can be easily peeled off, laminated shims can achieve the close tolerances of precision shims without the time and expense of precision manufacturing. The use of laminated shims also prevents dirt and foreign matter from accumulating between layers. Shims can be fabricated with full laminations, or from 1/2 solid or 3/4 solid stock. All MGP laminated shims are fabricated from sheets manufactured according to AMS-DTL-22499. MGP... Committed to Bring You the Best in Shims.

If you manufacture a product that insulates, cushions, or seals, Rubber Cork is the smart alternative.  Only Rubber Cork has true compressibility. Other materials under pressure crush, distort, or extrude. But Rubber Cork will truly compress with negligible sideflow. Why? Only Rubber Cork has natural cork granules uniformity dispersed throughout and cork has unique characteristics. It is make of cells with walls of a strong resinous substance that is flexible but will not stretch.  Trapped inside each cell is a pocket of air, in fact cork is 90% air (by volume). Under pressure the air inside is squeezed into a smaller space but because the cell is airtight, the compressed air maintains counter pressure until the force is released. (A one inch cube of pure cork can be compressed to 1/2 inch under 4000 psi without breakage and return to 90% of its original height).  By itself, cork is amazing, but remarkably when combined with synthetic rubber we get the properties of the polymer plus the benefit of true compressibility. This unique combination opens up worlds of possibilities in a variety of applications.

We manufacture high quality industrial steel flanges in variables sizes for  different applications in waterworks, petrochemicals, refineries, chemical  industry, construction works etc. These industrial flanges are manufactured  from high quality metal in accordance with set industrial norms to provide the clients maximum satisfaction. These flanges are offered by us at most reasonable rates.

We provide a comprehensive range of ASTM A193 Grade B-7 studs and A 194 Grade 2H nuts. These studs and nuts are made using quality tested materials and can easily withstand excessive wear and tear. We also implement the rigorous quality check procedure to ensure, that these studs & nuts are free from any kind of defect. Judicial mix of men and machinery allows us to customize them in accordance with clients' specific requirements.

You won't get any sharp edges or burrs with MGP Pre-Cut Alignment Tab Shims. Made from corrosion resistant 304 stainless steel, MGP tab shims eliminate the need to hand-cut extra shims and MGP tab shims are totally reusable. Order a tab shim kit equipped with a wide range of shim sizes and reduce the need to stack. MGP stocks regular and over-sized slots in A, B, C and D sizes.  Custom sizes AA, E, G and H are available - all up to 1/2" thick. Having the right size shim will save you time and money, and more importantly, will provide you with a more stable alignment.  Laminated Shims   Comprised of .002" or .003" layers of metal foil, laminated shims are coated with a very thin adhesive, then compressed and bonded together into a single, solid sheet. When the sheets are cut into shims, the resultant parts are ideal for the aeronautical, armament, shipbuilding, compressor and many other industries. Because individual layers can be easily peeled off, laminated shims can achieve the close tolerances of precision shims without the time and expense of precision manufacturing. The use of laminated shims also prevents dirt and foreign matter from accumulating between layers. Shims can be fabricated with full laminations, or from 1/2 solid or 3/4 solid stock. All MGP laminated shims are fabricated from sheets manufactured according to AMS-DTL-22499. MGP... Committed to Bring You the Best in Shims.

Teflon -based gasket materials are able to withstand significantly more  aggressive chemical environments (including highly oxidizing environments) than standard non-asbestos gasket materials. However their temperature, pressure and mechanical performance is inferior to standard non-asbestos gasket materials. Metal inserted and expanded PTFE are able to operate at higher pressures.  Teflon is principally used as a gasket material because of it's capability to  remain unaffected by the majority of chemicals used in industry. It is also  classified, in most cases, as a food grade material, making it acceptable to  both medical and food production industries. There are three basic types of  Teflon gasket materials. Virgin Teflon, filled Teflon and expanded Teflon.  Virgin Teflon is by far the least expensive of the three varieties, and is used  in most general applications. Filled Teflon® is a gasket material with a virgin. Teflon base to which a substance is added during manufacture to improve the sealing characteristics of Teflon . This "filler" usually is glass or graphite particles although ceramics has sometimes been used. The resulting gasket material is strong, yet highly compressible with very good, though not universal, chemical resistance.  Expanded Teflon is virgin Teflon to which a stress resistance has been added by means of molecular rearrangement during manufacture. This process ensures that the molecular chains from which the Teflon is constructed, do not arrange themselves into set patterns. This means that expanded Teflon possesses no structural weakness (grain) and expands and contracts equally in all directions. Because no additives are required, expanded Teflon® also possesses the unique chemical resistance of virgin Teflon.