Intekma Engineering Sdn. Bhd.

kuantan, Malaysia

• Weight900 gr
• Case dimensions200 mm х 178 mm х 36 mm
• DisplayColor TFT with back light

Sensor Units In the VIBRO-LASER 5M sensor units the latest digital data processing technology is used. Sensor units have CCD-detectors of 30 mm. This provides you with exact and stable measuring results and allows the system to be more interference-immune from the external factors (stray light, vibration, heat flow and etc.).

• Output range10mV to 10,000mV RMS; 10pC to 10,000pC
• Frequency range1Hz to 10kHz, accuracy ±0.5%

• Temperature:-10°C to +65°C

PC-100 Proximity Probe Checker is a battery operated, easy to use instrument which checks sensor GAP and then indicates it on the LED bar integrated on the front panel. There is also a LCD screen for displaying GAP voltage for better accuracy. PC-100 can also be used to simulate any current sensor with constant current output. Power is supplied by one internally mounted 9V alkaline battery. Working mode can be selected by a side switch mounted on the left side. There is also a visual identification of the selected mode placed on the front panel. The measured voltage is displayed on LCD screen and on LED diodes, which indicates the position of proximity sensor. It is especially designed for fast checking of proximity probes used in the monitoring system. It also helps the operator to set up proximity probe in optimal position andor to get information about the probe position in front of the shaft. In CURRENT SOURCE mode, the instrument produces fixed current of 12mA. It is designed to get external 24V on this input and it generates fixed current through integrated current loop.

• Frequency160Hz
• Dimension150mm x 80mm x 30mm
• 160Hz0.5kg typical

• Dimension196mm x 100mm x 40mm
• Availability0.5kg typical

MSS – 1010 is a battery operated instrument that is used to electronically simulate variety of outputs from various types of accelerometers. MSS-1010 uses a menu-driven 4×16 character LCD display to establish appropriate settings. The key panel contains five sealed switches marked with arrows, E (Enter), Back and ONOFF. Power is supplied by 4AA internally mounted rechargeable Ni-MH batteries, which can be recharged with a regulated 9Vdc source. Connection to PC is established over the front mounted LEMO connector. PC mode will be automatically started after inserting proper cable into device. Output signal is user selectable from: single-ended napon (mV), single-ended ®charge (pC), differental charge (pC), current-sinking IEPE (ICP), tachometer (TTL), ®flow (TTL), OSO (Optical Speed Output) and BOV (Bias Output Voltage).

• Memory:4 MB for data
• Temperature135°C