Newage Firefighting Co. Ltd. - Computer Monitor

Monitor (100 /150 Nb) Made Out of Asa 106 Gr. B (c.s.) Seamless Pipe, Hot Dip Galvanized 100 /150 Nb Flanged Inlet Drilled as per Ansi B 16.5 Class 150 Gunmetal (is:318 Ltb2) Swivel Joints with Worm & Worm Gear for Horizontal & Vertical Movement Permitting of 360 Degrees Horizontal & +90 to -45 Degrees Vertical Rotation Jet Cum Spray Pattern Nozzle Made of Aluminum Alloy / Aqua Foam Nozzle with Foam Pick Up Tube , Suitable for a Discharge of 3500 / 7500 Lpm At 7 Kg/cm2 Horizontal Throw of 60 / 80 Meters At 30 Angle & in 75 Meter for Foam At 30 Angle Still Air Condition Confirming to Is: 8442 Requirements (i.e. as per Is:8442).

Commando Multiple usage type Portable Ground cum Deck type lightweight monitor suitable for ground operation, and for mounting directly on stand post flange. Monitor should be detachable in two pieces, made of aluminium alloy (hard anodized), turbulence free waterways S.S. ball bearing swivel joint, having positive locking arrangements permitting 240 deg. horizontal rotation and + 30 deg. to + 90 deg. vertical traverse from ground level with lock pin for additional safety against lifting of monitor from ground while vertical traverse, having two 63mm male inst. inlet, fitted with jet and spray nozzle with stream straighter and spring control automatic arrangement, suitable for discharge of Minimum 2400 LPM at 7kg/cm2 pressure, 45 mtrs horizontal throw at 35 degree angle in still air, self closing safety valve for ground stability, mounted on folding stainless steel legs, automatic drain facility. Monitors weight will not exceed 30 Kgs with nozzle.

Electrically Operated Remote Control Monitor Consists of Stainless Steel/ Bronze Water Ways, Geared Swivel Joints with Suitable Geared 230v- Single Phase Motor for Horizontal and Vertical Movements, 12v Dc Linear Actuator for Nozzles Jet Spray Mode. Suitable Control Panel with Individual Joysticks for Horizontal, Vertical and Nozzle Movements. Cabelling from Motors Up to Junction Box Provided and from Junction Box to Control Panel Shall Be Optional. Automatic Overload Trips for Motors, Limit Switches Protection for Linear Actuators and Input Protection. Aluminium Alloy Hard Anodized Jet Spray Nozzle as per Required Capacity. Base Flanges Shall have Dimensions as per Ansi-b-16.5 150 # F/f. Rotation Up to 340 and Elevation 45 to +90. - Specifications monitor 80mm 100mm Flow Cap @ 7kg/cm2 1800 to 3000 Lpm 3000 5000 Lpm Horizontal Water Throw @30o and At 7kg/cm 258 65 Mtr 68 80 Mtr

- We Manufacture, Export, and Supply Remote Controlled Water Monitor Which is Operated No Electricity. the Remote Controlled Water Monitor Offered By Us is Manufactured Using High Grade Stainless Steel and Bronze Water Ways. Our Remote Controlled Water Monitor Has Suitable Control Panel with Individual Joysticks. - Salient Features Geared Swivel Joints with Suitable Geared 230v Single Phase Motor for Horizontal and Vertical Movements 12v Dc Linear Actuator for Nozzles Jet Spray Mode Cabling from Motors Up to Junction Box Provided and from Junction Box to Control Panel Shall Be Optional Automatic Overload Trips for Motors Switches Protection for Linear Actuators and Input Protection Aluminium Alloy Hard Anodized Jet Spray Nozzle as per Required Capacity Base Flanges Dimensions as per Ansi-b-16.5 150 # F/f Rotation Up to 340 and Elevation 45 to +90.movements - Horizontal Vertical Nozzle Specifications Monitor 80mm 100mm 150mm Flow Cap @ 7kg/cm2 1800 to 3000 Lpm 3000 5000 Lpm 5000 9000 Lpm Horizontal Water Throw @30o and At 7kg/cm2 58 65 Mtr68 80 Mtr82 100 Mtr.

- the Flow of the Monitor Will Be Not Less Than 1800 Lpm @ 7 Bar. the Monitor Will Be Equipped with a Nozzle Having Maximum Flow of 1800 Lpm @ 7 Bar. It Will have a Rotation Capability of 360 in Horizontal and 80 in Vertical When Being Used as a Ground Monitor. It Will have a Carrying Handle On Top to Carry the Monitor in Folded Condition. It Will have Stainless Steel Foldable Legs with Carbide Tips to Ensure Full Stability During Operation. It Will have a 2.5 Size Double Swivel Inlet Which Locking Mechanism for Mounting and Locking the Oscillating Attachment. the Unit Will Be Equipped with a Vertical Stop Pull Pin to Limit Its Vertical Movement to 30 for Safety Reasons. the Vertical Movement Beyond 30 Will Be Possible By Pulling the Vertical Stop Pull Pin. the Unit Will Be Equipped with a Pressure Gauge and Will Be Powder Coated in Red. the Unit Will have Screw Locks to Lock the Horizontal as Well as Vertical Movement of the Unit.

- We are Manufacturers, Exporters, and Suppliers of Oscillating Water Monitor Which Has Light Weight Construction. Our Oscillating Water Monitor is Specially Made from Premium Quality Aluminum Confirming to Smooth and Flawless Functioning. the Oscillating Water Monitor Has Wide Rotation Capability. - Salient Features the Flow of the Monitor is Not Less Than 1800 Lpm @ 7 Bar Equipped with a Nozzle Having Maximum Flow of 1800 Lpm @ 7 Bar Rotation Capability of 360 in Horizontal and 80 in Vertical When Being Used as a Ground Monitor a Carrying Handle On Top to Carry the Monitor in Folded Condition.steel Foldable Legs with Carbide Tips to Ensure Full Stability During Operation.a 2.5 Size Double Swivel Inlet Which Locking Mechanism for Mounting and Locking the Oscillating Attachment.a Vertical Stop Pull Pin to Limit Its Vertical Movement to 30 for Safety Reasons.

- We are Leaders in Manufacturing, Exporting, and Supplying Trolley Mounted Water Monitor Made Out of Asa 106 Gr. B (c.s.). the Is: 8442 Marked Trolley Mounted Water Monitor Offered By Us is Hot Dip Galvanized and Has Seamless Pipe. - Salient Features Gunmetal (is:318 Ltb2) Swivel Joints & S.s Ball Bearing with Brass Locking Arrangement, Mounted On a Rubber Tyred Trolley with Supporting Legs, Having Two /three/four 63mm Gunmetal Male Instantaneous Inlets with Non- Return Valves, Permitting of 360 Degrees Horizontal, 80 to -45 Degrees Vertical Traverse, Complete with Foam Barrel Type Nozzle Made of Aluminum Alloy Suitable for Discharge of Water Cap. 1750 /2580/3500 Lpm At 7kg/cm2 Pressure, Having Horizontal Throw of 53 / 60 /64mtrs for Water and 46mtrs for Foam in Still Air Condition Monitor.

- Oscillating Monitor Stand Post Type, Water Powered, Oscillating Mechanism Made of Gm, - Monitor Made Out of Seamless Steel Tubes, Hot Dip Galvanised Gm Swivel Joints with Locking Arrangements, Permitting Automatic Adjustable Arc from 0-190 Degree and Manual 0-360 Degree Rotation. - +80 to -45 Degree Manual Vertical Movement. Oscillating Speed Adjustable Between 0-80 Degree per Second. - 32 Mm Bore Gm Nozzle Suitable for a Discharge of 2580 Lpm At 7 Kg/cm2 Pressure, 55 Mtr Horizontal Throw in Still Air Conf. to is 8442.

Monitor (63 / 75 /100 Mm Size) Made Out of Asa 106 Gr. B (c.s.) Seamless Pipe, Hot Dip Galvanized 75 /100 Mm N.b. Flanged Inlet, Flange Dimension: Od 200mm, Pcd 160mm, Four 19m Diameter Holes Gunmetal(is:318 Ltb2) Swivel Joints & S.s Ball Bearing with Brass Locking Arrangement Permitting of 360 Degrees Horizontal, +90 to -45 Degrees Vertical Traverse 32 /38 Mm Bore Jet Nozzle Made of Aluminum Alloy with Threaded Inlet Suitable for a Discharge of 1750 /2580 /3500 Lpm At 7kg/cm2 Pressure Having Horizontal Throw of 53mtr. At 30 Deg. Angle in Still Air Condition.

- We Manufacture, Export, and Supply Fixed Water Monitor Made Out of Asa 106 Gr. B (c.s.). the Fixed Water Monitor Offered By Us Has Seamless Pipe and is Hot Dip Galvanized Product. Our Fixed Water Monitor is a Quality Product Bearing Is: 8442 Mark. - Salient Features Monitor (63 / 75 /100 Mm Size) Made Out of Asa 106 Gr. B (c.s.)75 /100 Mm N.b. Flanged Inlet, Flange Dimension: Od 200mm, Pcd 160mm, Four 19mdia Holes Gunmetal(is:318 Ltb2) Swivel Joints & S.s Ball Bearing with Brass Locking Arrangement, Permitting of 360 Degrees Horizontal, 80 to -45 Degrees Vertical Traverse, 32 /38 Mm Bore Jet Nozzle Made of Aluminum Alloy with Threaded Inlet Suitable for a Discharge of 1750 /2580 /3500 Lpm At 7kg/cm2 Pressure, Having Horizontal Throw of 53mtr. At 30 Deg. Angle in Still Air Condition