Manufacturer / Exporter / Supplier / Retailer Of smart card readers, RF ID Guard Patrol, Panel Based Access Control, Facial Based Attendance system, Biometric Based Attendance, Card Based Attendance System, AHD Cameras and Hybrid DVRs, Analogue Cameras and DVRs, Pc Linked Smart Card Reader, smart c... Read More
Checkmate XP is the Next Generation Multi-door Cost effective Access Controller ideally suited where high level security is imperative along with distributed control. .It manages upto 16 Proximity/Smart Card /Biometric Reader (Weigand Compatible) installed at various doors in an organization. The low cost, small, attractively packaged front end Readers are connected to the Controller in a Star Connection and the Lock release output is driven from the Controller itself. Hence no intelligent hardware is required at the door end. Checkmate XP provides a field configurable intelligent firmware engine for taking care of any organization?s access control requirement .The controller can be configured using a front end Software, COMPRO XP. Once the Checkmate XP is configured, all the Access decisions are taken by the controller making it truly a standalone system, independent of PC. It can be used in on-line mode for larger PC Controlled Building Management System. Multiple Checkmate XP?s can be networked on a RS485 bus or on a Ethernet Network with suitable hardware for larger application. Card Reader Technology :One of the following type of card Reader may be used as front end user interface for Access Control : MicroTIP : Finger Print Reader Finger Print Reader works on Biometric Technology. Upto 2 fingers can be enrolled. The Finger Print Reader is used as front end reader at the door. Upon placing the finger, if the user is enrolled, the ID Number against the finger is identified & the reader transmits the ID code for access validation to Checkmate XL. If the card holder is found valid, then the Access is granted. MicroSMART : Contact less Smart Card Reader : Contact less Smart card Reader works on 13.56 MHz RF based on MIFARE technology. It is useful where Multi- application for employee card is envisaged. MicroSMART , compliant to ISO 14443 Protocol, can be used (Read Range 3?). HID iClass Readers may also be used. MicroPROX : Proximity Card Reader(RF ID) : Proximity Reader is based on 125 KHz RF technology and reads the Proximity cards on show within read range .The Entry level MicroPROX reader has a read range of 3?. HID Prox Point Reader may also be used.
1. 5000V5 reader 2.POGO Pin connecting cable 3.Charger 4.RFID tags 5.Guard ID card 6.Management software 5000V5 system is an updating product on the basis of WM-5000V+; it is with POGO Pin connecter instead of the normal USB port, which makes the device more guard proof and waterproof. With special waterproof pad and adhesive, the reader can work in the water without problem; furthermore, 60000 records can be stored before the next download of data. 5000V5 works with RFID tags; with a simple non-contact swipe, the reader can read information from the tags, and then upload all the patrol records to the management software in a computer by a POGO Pin connecting cable; the information reports can demonstrate the guards" patrolling activities; Features: Military component Silicon tank, metal body with rubber shell outside, super durable IP67 standard POGO pin connecting cable, high download speed Non-contact reading of RFID tag Completely water proof and guard proof Sabotage absorbent, resistant to electrical shock Super storage capacity 4Mb Flash, 60000 records Power off protection REG colorful LED display Reading distance = 5 cm Real time internal clock
O-Zone is a sleek, trendy and rugged ABS molded Attendance & Access Control System designed for corporate offices. The terminal records IN/OUT time as well as breaks with a casual show of Contact less Card. It is designed to read MIFARE(ISO 14443 Type A)/iClass(ISO 15693) cards or 125 KHz RF(HID or EM) cards. O-Zone can be connected to a door lock/turnstile which is opened only on usage of valid Card, deterring proxy punching and barring unwanted visitors. A request-to-Exit Switch or Smart Card Reader for Exit may also be interfaced. It is provided with a suitable termination board for easy of connection & installation. The data is downloaded in online / offline mode to a PC for Time Office related Reports and data required for payroll. A Pallette of Features : Shift : Upto 16 shift Times and flexible Individual Shift Allocation to each employee Holidays : Upto 30 Holiday Dates and 1 weekly-off definable with separate Holiday Card Holder Database Mode of Operation : Individual Mode of operation for Attendance such as ID or ID + PIN (useful for Access control) Legacy : User Definable Block to Read ID number and Name from MIFARE Smart Card with user configurable Key A & Key B Dates : Definable Birthday for wishing Birthday & Validity Date to automatically deny Access after expiry date Employee Masking : Employee can be masked temporarily in case of suspension or loss of card Message Display : Global or Individual message display against card show, User definable Sign-on Message In/Out Mode : Programmable IN/OUT based on time of day and toggle the Mode using keyboard Advanced File Management : User Definable transaction file structure to suit any Legacy Software or dumping data to database tables Scheduler : Auto Scheduler to download data multiple times in a day or online Mode of operation Connectivity : WAN/WiFi/Bluetooth/Ethernet/RS232C/RS485/ZigBee(2.4 Ghz Radio Modem) connectivity option using suitable hardware Extended Hardware : MODEM interface for downloading data using telephone lines with Multi site support, EPABX Support Hardware Features: CPU: High Speed 16 bit microcontroller with Real time Clock and battery, Watch-dog- timer Reader: Built-in MIFARE Reader (optional 125 KHz RF Reader)and provision for additional external Reader on Wiegand I/F Communication Port: Field configurable RS 232C I RS 485 I Ethernet or 2.4GHz Radio Modem using suitable hardware Keyboard: Built-in 16 key sealed Membrane keyboard for PIN & Function keys for parameter setting, Smart Card initialization etc. Relay O/P : Potential free contact available as physical Access Control O/P with Lock Feedback and Request-to-Exit Switch I/P Display: 16 Character, 2 line Liquid Crystal Display(LCD) for Displaying Real-time-clock, ID No/Emp. No, Name, Message Audio: Built-in Audio chip and speaker for playing 12 prefixed messages (e.g. Welcome, Happy B"day etc.) an a Buzzer Auxiliary Port: RS 232C port being brought out for interface to Printer, Larger Display Panel, Computer, Reader etc. Card Holder: Upto 3400 Valid Card Holder ID Table with Name, Birthday, Employee ID, Validity Date, PIN, Shift and Mode Event Buffer: Last 20, 000 Records being saved as circular buffer in Battery backed- up RAM with Memory Dump feature SMPS: Universal SMPS with 90V-270VAC range and optional UPS with 2 hours battery back-up
Share your thoughts with other customers for Nanotech Integrated Solutions Pvt. Ltd.
Add Review
