Other Products / Services #637372

Spoon Plate 4.5. These plates are primarily indicated for pilon fractures that have extensive anterior crushing and provides good posture support, It is also used in the treatment of metaphyseal non-unions of distal tibia and the distal humerus, Spoon Plate 4.5s are designed to fit over anterior crest of tibia, It should be bent pre-operative to accurately match the anatomy of the segment of bone to be fixed. An oval hole helps in temporary fixation of the plate prior to final adjustment and fixation.Holes of the plate allow 4.5 mm cortex screws.

Our Medical rubber products made from virgin natural rubber have excellent surface finish, elasticity, flexibility, resilience, high mechanical properties and are odour free. They have the necessary bio-compatibility and are safe for short term contact with intact human skin. SurgicalMedical Rubber Goods category have Catheters, RectalColon Tubes, Invalid Air Rings (Air Cushions), Corrugated Drainage Sheets, Mackintosh Sheeting, Hospital Rubber Sheeting, Atomizer Bulbs, Air Way Tube, Pessary Rubber Ring, Ice Bags, Chloroform Bellows Sigmoidoscope bellows, EarUlcer Syringes, Tourniquet, Enema Products, and many other products. Not only our products conform to ISO 9001:2008, EN ISO 13485:2012 & CE standards, but we also constantly exceed international quality norms.

Dressing Drum, domed top and bottom with sliding removable band and drop down-hasps (stainless steel).

Power Output : 100WSpeed : 0-16000(osc/min)Noise : 75 (db)Battery : 14.4 (V), Ni-Mh, 1800 mA/hSterilization : 155 C

Set Consisting of		Units
SPT27.1	Battery powered handpiece	1
SPT01	Battery	2
SPT02	Battery Charger 220V, 50Hz	1
SPT03	Sterilizing Ring	2
Set of 3 Blades as below				1 Set
Code	CuttingThickness mm	UsableLength mm		Widthmm	Qty
SPT27.20	0.8	70		22	1
SPT27.38	1	90		22	1
SPT27.35	1	90		14	1

AS102 Perfect Femoral Nail Implants Set - For Right leg
Set Consisting of :	Units
Femoral Nails
9mm Dia
1 Each Length 320, 340, 360, 380, 400, 420, 440mm	7
10mm Dia
1 Each Length 320, 340, 360, 380, 400, 420, 440mm	7
11mm Dia
1 Each Length 320, 340, 360, 380, 400, 420, 440mm	7
Locking Screw 4.8mm Dia
4 Each Length 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50mm	52
2 Each Length 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 85	32
Hip Screw 6.35mm Dia
2 Each Length 60, 65, 70mm	6
4 Each Length 75, 80, 85, 90, 95, 100, 105, 110, 115mm	36
End Caps
2 Each Extn 0, 5, 10, 15, 20	10
102.000Empty Containder

• TENS Nail - Length 40cm are intended for Diaphyseal and certain Metaphyseal fractures of long bones, Subcapital Humerus, Metatarsal and Metacarpal fractures and complex Clavicular fractures in Children.
• In adult patients TENS Nail is used for the Diaphyseal fractures of long bones in upper extremity and Clavicle Shaft fractures.
• Use with Instrument Set - AS149

• Extn. in mm	STAINLESS STEEL
  	Lenght 40cm	Lenght 44cm
  1.5	TEN1.5-40	-
  2.0	TEN2-40	TEN2-44
  2.5	TEN2.5-40	TEN2.5-44
  3.0	TEN3-40	TEN3-44
  3.5	TEN3.5-40	TEN3.5-44
  4.0	TEN4-40	TEN4-44
  4.5	TEN4.5-40	TEN4.5-44

• Dia in mm	TITANIUM
  	Lenght 40cm	Lenght 44cm
  1.5	Ti-TEN1.5-40	-
  2.0	Ti-TEN2-40	Ti-TEN2-44
  2.5	Ti-TEN2.5-40	Ti-TEN2.5-44
  3.0	Ti-TEN3-40	Ti-TEN3-44
  3.5	Ti-TEN3.5-40	Ti-TEN3.5-44
  4.0	Ti-TEN4-40	Ti-TEN4-44
  4.5	Ti-TEN4.5-40	Ti-TEN4.5-44

• Rush Nails are intended for fractures of Diaphyseal or Metaphyseal fractures of long bones like Femur, Tibia, Febula, Humerus, Radius and Ulna.
• The pointed tip facilitates easy insertion.
• The curve at the top prevents rotation and stabilizes the fracture.

• Length(cm)	STAINLESS STEEL - Diameter in mm
  	2 mm	2.5 mm	3 mm	3.5 mm	4 mm	5 mm	6 mm
  5	186.20-05	-	-	-	-	-	-
  6	186.20-06	-	-	-	-	-	-
  7	186.20-07	-	-	-	-	-	-
  8	186.20-08	-	-	-	-	-	-
  9	186.20-09	-	-	-	-	-	-
  10	186.20-10	186.25-10	186.30-10	186.35-10	-	-	-
  11	186.20-11	186.25-11	186.30-11	186.35-11	-	-	-
  12	186.20-12	186.25-12	186.30-12	186.35-12	-	-	-
  13	186.20-13	186.25-13	186.30-13	186.35-13	-	-	-
  14	186.20-14	186.25-14	186.30-14	186.35-14	-	-	-
  15	186.20-15	186.25-15	186.30-15	186.35-15	186.40-15	-	-
  16	186.20-16	186.25-16	186.30-16	186.35-16	186.40-16	-	-
  17	186.20-17	186.25-17	186.30-17	186.35-17	186.40-17	-	-
  18	186.20-18	186.25-18	186.30-18	186.35-18	186.40-18	-	-
  19	186.20-19	186.25-19	186.30-19	186.35-19	186.40-19	-	-
  20	186.20-20	186.25-20	186.30-20	186.35-20	186.40-20	186.50-20	186.60-20
  21	186.20-21	186.25-21	186.30-21	186.35-21	186.40-21	186.50-21	186.60-21
  22	186.20-22	186.25-22	186.30-22	186.35-22	186.40-22	186.50-22	186.60-22
  23	186.20-23	186.25-23	186.30-23	186.35-23	186.40-23	186.50-23	186.60-23
  24	186.20-24	186.25-24	186.30-24	186.35-24	186.40-24	186.50-24	186.60-24
  25	186.20-25	186.25-25	186.30-25	186.35-25	186.40-25	186.50-25	186.60-25
  26	-	186.25-26	186.30-26	186.35-26	186.40-26	186.50-26	186.60-26
  27	-	186.25-27	186.30-27	186.35-27	186.40-27	186.50-27	186.60-27
  28	-	186.25-28	186.30-28	186.35-28	186.40-28	186.50-28	186.60-28
  29	-	186.25-29	186.30-29	186.35-29	186.40-29	186.50-29	186.60-29
  30	-	186.25-30	186.30-30	186.35-30	186.40-30	186.50-30	186.60-30
  31	-	-	-	-	186.40-31	186.50-31	186.60-31
  32	-	-	-	-	186.40-32	186.50-32	186.60-32
  33	-	-	-	-	186.40-33	186.50-33	186.60-33
  34	-	-	-	-	186.40-34	186.50-34	186.60-34
  35	-	-	-	-	186.40-35	186.50-35	186.60-35
  36	-	-	-	-	186.40-36	186.50-36	186.60-36
  37	-	-	-	-	186.40-37	186.50-37	186.60-37
  38	-	-	-	-	186.40-38	186.50-38	186.60-38
  39	-	-	-	-	186.40-39	186.50-39	186.60-39
  40	-	-	-	-	186.40-40	186.50-40	186.60-40

Small Fragment Locking Implants are used in treatment of Osteomies, Nonunions and small fracture fixation such as fracture of Clavicle, Scapula, Olecranon, Humerus, Ulna, Radius, Pelvis, Distal Tibia and Fibula. These are also used in fractures fixation of long bones in Pediatric patients. Small Fragment System comprises Safety Locking and Standard Plates and Screws. The plates are classified according to their functions.

Locking Proximal Humerus Plate is used for complex and unstable fractures.

Indications Proximal Humerus

• Multifragmentary (dislocated) fractures requiring open reduction
• Unstable subcapital fractures
• Subcapital pseudarthrosis
• Osteotomies

Suture holes The fixation of additional wireloops or sutures attached to the tubercles (in 3- or 4-fragment fractures) neutralises the muscle tension and helps to maintain reduction.

The head of plate allows only 3.5 mm Safety Lock Screws and shaft of the plate allows both 3.5 mm Safety Lock and Cortical screws.

No. of Holes	STAINLESS STEEL
5	SF-640.005
6	SF-640.006
7	SF-640.007
8	SF-640.008

No. of Holes	TITANIUM
5	Ti-SF-640.005
6	Ti-SF-640.006
7	Ti-SF-640.007
8	Ti-SF-640.008

• The Distal Humerus Safety Lock Plate 2.7/3.5, Dorsolateral is available in various lengths. There are two version of the plate left and right separately designed for right and left humerus. The plates are pre-shaped to match the anatomy of the distal humerus with a limited contact low profile design.
• The Head Region of the plate accommodates safety Lock Screw 2.7 mm-Self Tapping and shaft region accommodates both cortex screw 3.5 mm-self tapping and Saftey Lock screw 3.5 mm-self tapping
• The Distal Humerus safety Lock Plate 2.7/3.5, Dorsolateral is indicated for intraarticular fractures of the distalo humerus, comminuted supracondylar fractures, osteotormies, and non-unions of the distal humerus.

No. ofHoles	STAINLESS STEEL
	Left	Right
3	SF-601.03L	SF-601.03R
5	SF-601.05L	SF-601.05R
7	SF-601.07L	SF-601.07R
9	SF-601.09L	SF-601.09R
14	SF-601.14L	SF-601.14R

No. ofHoles	TITANIUM
	Left	Right
3	Ti-SF-601.03L	Ti-SF-601.03R
5	Ti-SF-601.05L	Ti-SF-601.05R
7	Ti-SF-601.07L	Ti-SF-601.07R
9	Ti-SF-601.09L	Ti-SF-601.09R
14	Ti-SF-601.14L	Ti-SF-601.14R

Indications:The 3.5 mm LCP Extra-articular Distal Humerus Plates are indicated for fractures of the distal humerus.

Plate features

• Left and right plates are anatomically contoured to match the posterolateral distal humerus.
• Two most distal holes are angled toward the capitulum and trochlea.
• Plate head tapered to minimize soft tissue irritation.
• A limited-contact plate design reduces plate-to-bone contact and helps to preserve the periosteal blood supply.

Anatomic reduction:Fracture reduction and fixation to restore anatomical relationships.

Stable fixation:Fracture fixation providing absolute or relative stability, as required by the patient, the injury, and the personality of the fracture.

Early, active mobilization:Early and safe mobilization and rehabilitation of the injured part and the patient as a whole.

Preservation of blood supply:Preservation of the blood supply to soft tissues and bone by gentle reduction techniques and careful handling.

No. ofHoles	STAINLESS STEEL
	Left	Right
4	SF-612.04L	SF-612.04R
6	SF-612.06L	SF-612.06R
8	SF-612.08L	SF-612.08R
10	SF-612.10L	SF-612.10R
12	SF-612.12L	SF-612.12R
14	SF-612.14L	SF-612.14R

No. ofHoles	TITANIUM
	Left	Right
4	Ti-SF-612.04L	Ti-SF-612.04R
6	Ti-SF-612.06L	Ti-SF-612.06R
8	Ti-SF-612.08L	Ti-SF-612.08R
10	Ti-SF-612.10L	Ti-SF-612.10R
12	Ti-SF-612.12L	Ti-SF-612.12R
14	Ti-SF-612.14L	Ti-SF-612.14R

• The Medial Distal Humerus Safety Lock Plate 2.7/3.5, is available in various lengths. There are two version of the plate left and right separately designed for right and left humerus. The plates are pre-shaped to match the anatomy of the distal humerus with a limited contact low profile design.
• The Head Region of the plate accommodates safety Lock Screw 2.7 mm-Self Tapping and shaft region accommodates both cortex screw 3.5 mm - Self Tapping and Saftey Lock Screw 3.5 mm - Self Tapping
• The Medial Distal Humerus safety Lock Plate 2.7/3.5, Left Direction is indicated for intraarticular fractures of the Distal Humerus, comminuted supracondylar fractures, osteotormies, and non-unions of the Distal Humerus.

• No. ofHoles	STAINLESS STEEL
  	Left	Right
  3	SF-604.03L	SF-604.03R
  5	SF-604.05L	SF-604.05R
  7	SF-604.07L	SF-604.07R
  9	SF-604.09L	SF-604.09R
  14	SF-604.14L	SF-604.14R

• No. ofHoles	TITANIUM
  	Left	Right
  3	Ti-SF-604.03L	Ti-SF-604.03R
  5	Ti-SF-604.05L	Ti-SF-604.05R
  7	Ti-SF-604.07L	Ti-SF-604.07R
  9	Ti-SF-604.09L	Ti-SF-604.09R
  14	Ti-SF-604.14L	Ti-SF-604.14R

Plate Features:

Anatomically precontoured plate:plateThe anatomical shape of the plate has been especially designed to fit the complex shape of the medial part of the distal humerus.

Thinned plate profile:The distal part of the plate is tapered to preserve the thin soft tissue envelope of the distal humerus.

Notches on the plate shaft:The notches allow for additional lateral bending of the plate to deal with the wide anatomical variance of the humeri. The plate can be bent at max. 4 at each notch.

Optimal distal application of the locking screws:The distal end of the plate has been equipped with three threaded round holes intended for angular stable locking screws. Their specific orientation in combination with the thin plate profile allows stable fixation of the condylar zone and the articular surface while fully pre-serving the soft tissue, without any risk of screws penetrating the articulation.

Increased hole density for improved anchorage:The three distal LCP round holes allow inserting the screws closer to one another and hence an optimal fixation of the bone fragments.The elongated hole in the shaft facilitates fine tuning of the reduction and plate positioning in the longitudinal axis.Improved vascularization of the bone due to plate undercuts that reduce the plate-to-bone contact.

Indications:

Metaphyseal Safety Lock Plate 3.5 for Distal, Medial Humerus is an anatomically precontoured plate that permits an optimal treatment of juxta-articular distal humerus fractures. It takes into account the following peculiarities of the distal humerus: Thin soft-tissue envelope & complex shape of the bone.

No. of Holes	STAINLESS STEEL
7	SF-611.07
9	SF-611.09
11	SF-611.11
13	SF-611.13
15	SF-611.15

No. of Holes	TITANIUM
7	Ti-SF-611.07
9	Ti-SF-611.09
11	Ti-SF-611.11
13	Ti-SF-611.13
15	Ti-SF-611.15

Plate Features:

• Proximal Tibia Safety Lock Plate 3.5mm is used for Non-unions, Malunions, and fractures of Proximal Tibia, including Simple, Comminuted, Lateral wedge, Depression, Medial wedge, Bicondylar, Combination of Lateral wedge and depression and fractures associated with shaft.
• These plates can be anatomically contoured to match Proximal Lateral Tibia.
• These plates are designed for both right or left Tibia and are available in a variety of lengths.
• The head and three Proximal holes allow only 3.5 mm Safety Lock screws, rest holes allow both 3.5 mm Safety Lock and Cortical screws.

No. ofHoles	STAINLESS STEEL
	Left	Right
4	SF-607.04L	SF-607.04R
6	SF-607.06L	SF-607.06R
8	SF-607.08L	SF-607.08R
10	SF-607.10L	SF-607.10R
12	SF-607.12L	SF-607.12R
14	SF-607.14L	SF-607.14R
16	SF-607.16L	SF-607.16R

No. ofHoles	TITANIUM
	Left	Right
4	Ti-SF-607.04L	Ti-SF-607.04R
6	Ti-SF-607.06L	Ti-SF-607.06R
8	Ti-SF-607.08L	Ti-SF-607.08R
10	Ti-SF-607.10L	Ti-SF-607.10R
12	Ti-SF-607.12L	Ti-SF-607.12R
14	Ti-SF-607.14L	Ti-SF-607.14R
16	Ti-SF-607.16L	Ti-SF-607.16R

Indications:

• Extra-articular and simple intra-articular distal tibial fractures.
• Distal tibial fractures, percutaneous or reducible by limited arthrotomy.
• Distal tibial fracture extending into the diaphyseal area.

Plate Features:

• These Plates can be anatomically contoured to match with the Distal Medial Tibia.
• These plates are designed for both right and left tibia and are available in a variety of lengths.
• The head hole allows only 3.5 mm Safty Lock screws, rest holes allow both 3.5 mm Safety Lock and Cortical screws.
• Screws : For Combi holes - 3.5 Locking, 3.5 Cortical, 4.0 Cancellous.For Round Locking Holes - 3.5 Locking, 2.7 or 3.5 Cortical, 4.0 Cancellous.

No. ofHoles	STAINLESS STEEL
	Left	Right
4	SF-645.04L	SF-645.04R
6	SF-645.06L	SF-645.06R
8	SF-645.08L	SF-645.08R
10	SF-645.10L	SF-645.10R
12	SF-645.12L	SF-645.12R
14	SF-645.14L	SF-645.14R

No. ofHoles	TITANIUM
	Left	Right
4	Ti-SF-645.04L	Ti-SF-645.04R
6	Ti-SF-645.06L	Ti-SF-645.06R
8	Ti-SF-645.08L	Ti-SF-645.08R
10	Ti-SF-645.10L	Ti-SF-645.10R
12	Ti-SF-645.12L	Ti-SF-645.12R
14	Ti-SF-645.14L	Ti-SF-645.14R

Small Fragment Locking Implants are used in treatment of Osteomies, Nonunions and small fracture fixation such as fracture of Clavicle, Scapula, Olecranon, Humerus, Ulna, Radius, Pelvis, Distal Tibia and Fibula. These are also used in fractures fixation of long bones in Pediatric patients. Small Fragment System comprises Safety Locking and Standard Plates and Screws. The plates are classified according to their functions.

No. ofHoles	STAINLESS STEEL
	Left	Right
4	SF-606.04L	SF-606.04R
6	SF-606.06L	SF-606.06R
8	SF-606.08L	SF-606.08R
10	SF-606.10L	SF-606.10R
12	SF-606.12L	SF-606.12R
14	SF-606.14L	SF-606.14R

No. ofHoles	TITANIUM
	Left	Right
4	Ti-SF-606.04L	Ti-SF-606.04R
6	Ti-SF-606.06L	Ti-SF-606.06R
8	Ti-SF-606.08L	Ti-SF-606.08R
10	Ti-SF-606.10L	Ti-SF-606.10R
12	Ti-SF-606.12L	Ti-SF-606.12R
14	Ti-SF-606.14L	Ti-SF-606.14R

Small Fragment Locking Implants are used in treatment of Osteomies, Nonunions and small fracture fixation such as fracture of Clavicle, Scapula, Olecranon, Humerus, Ulna, Radius, Pelvis, Distal Tibia and Fibula. These are also used in fractures fixation of long bones in Pediatric patients. Small Fragment System comprises Safety Locking and Standard Plates and Screws. The plates are classified according to their functions.

No. ofHoles	STAINLESS STEEL
	Left	Right
4	SF-605.04L	SF-605.04R
6	SF-605.06L	SF-605.06R
8	SF-605.08L	SF-605.08R
10	SF-605.10L	SF-605.10R
12	SF-605.12L	SF-605.12R
14	SF-605.14L	SF-605.14R

No. ofHoles	TITANIUM
	Left	Right
4	Ti-SF-605.04L	Ti-SF-605.04R
6	Ti-SF-605.06L	Ti-SF-605.06R
8	Ti-SF-605.08L	Ti-SF-605.08R
10	Ti-SF-605.10L	Ti-SF-605.10R
12	Ti-SF-605.12L	Ti-SF-605.12R
14	Ti-SF-605.14L	Ti-SF-605.14R

Indication:

• Distal articular fractures of the tibia (pilon fractures) with emphasis on complex articular reconstruction

Small Fragment Locking Implants are used in treatment of Osteomies, Nonunions and small fracture fixation such as fracture of Clavicle, Scapula, Olecranon, Humerus, Ulna, Radius, Pelvis, Distal Tibia and Fibula. These are also used in fractures fixation of long bones in Pediatric patients. Small Fragment System comprises Safety Locking and Standard Plates and Screws. The plates are classified according to their functions.

No. of Holes	STAINLESS STEEL
7	SF-649.07
9	SF-649.09

Indications:

The Metaphyseal plates are indicated for extra-articular fractures of the metaphyseal area that extend into the shaft. The 3.5 plate is indicated for distal tibial and distal humeral fractures.

Plate Features:

• Safety Locking combi-holes allow uncompromising combinations:The combi-hole allows an internal plate fixation using standard screws, angular stable locking screws, or a combination of both. This takes into account the most diverse intraoperative requirements.
• Angular stability allows for better fixation:The angle- and axis-stable locking screws prevent loss of reduction under load. A precise anatomical contouring of the plate is unnecessary when using this system as a locking internal fixator.
• Easier plate contouring due to thinned plate profile:The plate design facilitates anatomical contouring considerably, whilst taking into account the distinctive features of the metaphyseal bone area (e.g. complex bone shapes, thin soft tissue envelope).
• The Metaphyseal Safety Lock Plates have both compression and locking holes. All holes of plate accept 3.5 mm cortex, 3.5mm safety lock and 4.0 mm cancellous screws.

No. of Holes	TITANIUM
6	Ti-SF-613.06
7	Ti-SF-613.07
8	Ti-SF-613.08
9	Ti-SF-613.09
10	Ti-SF-613.10
11	Ti-SF-613.11
12	Ti-SF-613.12
14	Ti-SF-613.13
16	Ti-SF-613.14
18	Ti-SF-613.15

Indications:

• Fractures of the clavicle shaft
• Malunions of the clavicle shaft
• Non-unions of the clavicle shaft

Plate Features:

• Anatomically pre-shaped, twisted design.
• Due to Lateral superior placement, there is less need to detach muscles than with anterior placement.
• Undercuts reduce impairment of blood supply.
• Good purchase also in osteoporotic bone and in multifragment fractures.
• Tapered plate tip facilitates percutaneous insertion and prevents soft tissue irritation.

No. ofHoles	TITANIUM
	Left	Right
6	Ti-SF-620.06L	Ti-SF-620.06R
7	Ti-SF-620.07L	Ti-SF-620.07R
8	Ti-SF-620.08L	Ti-SF-620.08R

Indications:

• Fractures of the lateral clavicle
• Malunions of the lateral clavicle
• Non-unions of the lateral clavicle
• Available in longer versions for lateral fractures with associated shaft fractures

Plate Features:

• Anatomically pre-shaped, twisted design.
• Due to Lateral superior placement, there is less need to detach muscles than with anterior placement.
• Undercuts reduce impairment of blood supply.
• Good purchase also in osteoporotic bone and in multifragment fractures.
• Tapered plate tip facilitates percutaneous insertion and prevents soft tissue irritation.

• No. ofHoles	STAINLESS STEEL
  	Left	Right
  3	SF-622.03L	SF-622.03R
  4	SF-622.04L	SF-622.04R
  5	SF-622.05L	SF-622.05R
  6	SF-622.06L	SF-622.06R
  7	SF-622.07L	SF-622.07R
  8	SF-622.08L	SF-622.08R

• No. ofHoles	TITANIUM
  	Left	Right
  3	Ti-SF-622.03L	Ti-SF-622.03R
  4	Ti-SF-622.04L	Ti-SF-622.04R
  5	Ti-SF-622.05L	Ti-SF-622.05R
  6	Ti-SF-622.06L	Ti-SF-622.06R
  7	Ti-SF-622.07L	Ti-SF-622.07R
  8	Ti-SF-622.08L	Ti-SF-622.08R

Indications:

• Calcaneus fracture: Intra-articular & Extra-articular
• Multiple Fragment Fractures of Calcaneus
• Tongue-type Calcaneus Fractures
• Calcaneus fracture: Joint depression
• Poor heel position and shape
• Displaced articular involvement

Available in 60 and 70 mm lengths. These plates are designed for both Right and Left sides.All holes of the plate allow 3.5 mm safety lock screws.

Indications:

• Calcaneus fracture: Intra-articular & Extra-articular
• Multiple Fragment Fractures of Calcaneus
• Tongue-type Calcaneus Fractures
• Calcaneus fracture: Joint depression
• Poor heel position and shape
• Displaced articular involvement

Plate features:

• Bending tabs give support to plantar fragments and anterior process.
• Lateral application.
• Holes with threaded offer a fixed-angle construct to buttress the articular surfaces of the calcaneus.
• Permit multiple points of fixation to buttress small fragments.
• All holes of the plate allow 3.5 mm safety lock screws.
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

Available in 60 and 70 mm lengths. These plates are designed for both Right and Left sides.All holes of the plate allow 3.5 mm safety lock screws.

Size	Lengthmm	STAINLESS STEEL
		Left	Right
Extra Small	64	SF-138.64L	SF-138.64R
Small	69	SF-138.69L	SF-138.69R
Large	76	SF-138.76L	SF-138.76R
Extra Large	81	SF-138.81L	SF-138.81R

Size	Lengthmm	TITANIUM
		Left	Right
Extra Small	64	Ti-SF-138.64L	Ti-SF-138.64R
Small	69	Ti-SF-138.69L	Ti-SF-138.69R
Large	76	Ti-SF-138.76L	Ti-SF-138.76R
Extra Large	81	Ti-SF-138.81L	Ti-SF-138.81R

Indications:

Lateral Distal Fibula Safety Lock Plate 2.7/3.5 is indicated for fractures, osteotomies and nonunions of the metaphyseal and diaphyseal region of the distal fibula, especially in osteopenic bone.

Plate Features:

• Anatomically contoured Lateral Distal Fibula Safety Lock Plate 2.7/3.5.
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

No. ofHoles	STAINLESS STEEL
	Left	Right
3	SF-652.03L	SF-652.03R
4	SF-652.04L	SF-652.04R
5	SF-652.05L	SF-652.05R
6	SF-652.06L	SF-652.06R
7	SF-652.07L	SF-652.07R

No. ofHoles	STAINLESS STEEL
	Left	Right
3	Ti-SF-652.03L	Ti-SF-652.03R
4	Ti-SF-652.04L	Ti-SF-652.04R
5	Ti-SF-652.05L	Ti-SF-652.05R
6	Ti-SF-652.06L	Ti-SF-652.06R
7	Ti-SF-652.07L	Ti-SF-652.07R

Indications:

Volar Column Distal Radius Safety Lock Plate 2.4 (8 Head Holes) is indicated for the fixation of intra- and extra-articular fractures and osteotomies of the distal radius. Multiple distal locking screw options offer a fixed-angle construct to support the articular surface, reduce the need for bone graft and obtain fixation in osteoporotic bone.

Plate Features:

• Anatomically contoured Volar Column Distal Radius Safety Lock Plate 2.4.
• Multiple locking screw option in plate head assist in fixation of the radial and intermediate column.
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

L/R	No. of Holes	Stainless Steel
Left	3	SF-120.803L
Right	3	SF-120.803R
Left	4	SF-120.804L
Right	4	SF-120.804R
Left	5	SF-120.805L
Right	5	SF-120.805R

L/R	No. of Holes	TITANIUM
Left	3	Ti-SF-120.803L
Right	3	Ti-SF-120.803R
Left	4	Ti-SF-120.804L
Right	4	Ti-SF-120.804R
Left	5	Ti-SF-120.805L
Right	5	Ti-SF-120.805R

Indications:

Volar Column Distal Radius Safety Lock Plate 2.4 (9 Head Holes) is indicated for the fixation of intra- and extra-articular fractures and osteotomies of the distal radius. Multiple distal locking screw options offer a fixed-angle construct to support the articular surface, reduce the need for bone graft and obtain fixation in osteoporotic bone.

Plate Features:

• Anatomically contoured Volar Column Distal Radius Safety Lock Plate 2.4.
• Multiple locking screw option in plate head assist in fixation of the radial and intermediate column.
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

L/R	No. of Holes	Stainless Steel
Left	3	SF-120.903L
Right	3	SF-120.903R
Left	4	SF-120.904L
Right	4	SF-120.904R
Left	5	SF-120.905L
Right	5	SF-120.905R

L/R	No. of Holes	TITANIUM
Left	3	Ti-SF-120.903L
Right	3	Ti-SF-120.903R
Left	4	Ti-SF-120.904L
Right	4	Ti-SF-120.904R
Left	5	Ti-SF-120.905L
Right	5	Ti-SF-120.905R

Indications:

Volar Distal Radius Safety Lock Plate 2.4, Extra-Articular, Extra-long is indicated for treating distal radius fractures with extension into the shaft.

Plate Features:

• Anatomically contoured Volar Distal Radius Safety Lock Plate 2.4, Extra-Articular, Extra-long.
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

HeadHoles	ShaftHoles	Stainless Steel
4	8	SF-122.108
4	10	SF-122.110
4	12	SF-122.112

HeadHoles	ShaftHoles	TITANIUM
4	8	Ti-SF-122.108
4	10	Ti-SF-122.110
4	12	Ti-SF-122.112

Indications:

Volar Distal Radius Safety Lock Plate 2.4, Extra Articular (5 Head Holes) is indicated for displaced extra-articular and intra-articular distal radius fractures and corrective osteotomies of the distal radius.

Plate Features:

• Anatomically contoured Volar Distal Radius Safety Lock Plate 2.4, Extra Articular (5 Head Holes)
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

L/R	No. of Holes	Stainless Steel
Left	3	SF-121.504L
Right	3	SF-121.504R
Left	5	SF-121.505L
Right	5	SF-121.505R

Indications:

Volar Distal Radius Safety Lock Plate 2.4, Extra Articular (4 Head Holes) is indicated for displaced extra-articular and intra-articular distal radius fractures and corrective osteotomies of the distal radius.

Plate Features:

• Anatomically contoured Volar Distal Radius Safety Lock Plate 2.4, Extra Articular (4 Head Holes)
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

L/R	No. of Holes	Stainless Steel
Left	3	SF-121.304L
Right	3	SF-121.304R
Left	5	SF-121.305L
Right	5	SF-121.305R

L/R	No. of Holes	TITANIUM
Left	3	Ti-SF-121.304L
Right	3	Ti-SF-121.304R
Left	5	Ti-SF-121.305L
Right	5	Ti-SF-121.305R

Indications:

Volar Distal Radius Safety Lock Plate 2.4, juxta-articular (5 Head Holes) is indicated for displaced extra-articular and intra-articular distal radius fractures and corrective osteotomies of the distal radius.

Plate Features:

• Anatomically contoured Volar Distal Radius Safety Lock Plate 2.4, juxta-articular (5 Head Holes)
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

L/R	No. of Holes	Stainless Steel
Left	3	SF-123.503L
Right	3	SF-123.503R
Left	5	SF-123.505L
Right	5	SF-123.505R

L/R	No. of Holes	TITANIUM
Left	3	Ti-SF-123.503L
Right	3	Ti-SF-123.503R
Left	5	Ti-SF-123.505L
Right	5	Ti-SF-123.505R

Indications:

Volar Distal Radius Buttress Safety Lock Plate 2.4, juxta-articular (5 Head Holes) is indicated for displaced extra-articular and intra-articular distal radius fractures and corrective osteotomies of the distal radius.

Plate Features:

• Anatomically contoured Volar Distal Radius Buttress Safety Lock Plate 2.4, juxta-articular (5 Head Holes).
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

L/R	No. of Holes	Stainless Steel
Left	3	SF-124.503L
Right	3	SF-124.503R

Indications:

• Dorsally displaced distal radius fractures.
• Combination of distal radius with carpal and metacarpal fractures.
• Corrective osteotomies.

Plate Features:

• Anatomically contoured Dorsal Distal Radius Safety Lock Plate 2.4 - Straight.
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone

No. of Holes	Stainless Steel
5	SF-125.105
6	SF-125.106

No. of Holes	TITANIUM
5	Ti-SF-125.105
6	Ti-SF-125.106

Indications:

• Complex intra-articular and extra-articular olecranon fractures.
• Pseudoarthrosis of the proximal ulna.
• Simple olecranon fractures.
• Repair of the olecranon after osteotomies in distal humerus surgery.

Plate Features:

• Angular stable fixation of fragments regardless of bone quality.
• Minimised risk of primary and secondary loss of reduction, even under high dynamic loading.
• Reduced impairment of periosteal blood supply due to the limited plate contact.

No. ofHoles	STAINLESS STEEL
	Left	Right
2	SF-647.02L	SF-647.02R
4	SF-647.04L	SF-647.04R
6	SF-647.06L	SF-647.06R
8	SF-647.08L	SF-647.08R
10	SF-647.10L	SF-647.10R
12	SF-647.12L	SF-647.12R

• Calcaneal Plate for 3.5mm Screws is used for Nonarticular body fractures (Noncomminuted and Comminuted) and Articular fractures involving posterior facet of Calcaneus bone.
• Available in 60 and 70 mm length & in left and right designs.
• All holes of the plate allow 3.5 mm cortical screws.

• Length mm	STAINLESS STEEL
  60	137.160
  70	137.170

• Length mm	TITANIUM
  60	Ti-137.160
  70	Ti-137.170

• T-Plate 3.5, Right Angled (3 Head Holes).
• These plates are indicated for the Extra-articular, Partial articular and Complete articular fractures of Disal Radius.
• All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous screws.

• No. of Holes	STAINLESS STEEL
  3	141.103
  4	141.104
  5	141.105
  6	141.106

• No. of Holes	TITANIUM
  3	Ti-141.103
  4	Ti-141.104
  5	Ti-141.105
  6	Ti-141.106

• T-Plate 3.5, Right Angled (4 Head Holes).
• These plates are indicated for the Extra-articular, Partial articular and Complete articular fractures of Disal Radius.
• All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous screws.

• No. of Holes	TITANIUM
  3	Ti-141.203
  4	Ti-141.204
  5	Ti-141.205
  6	Ti-141.206
• No. of Holes	STAINLESS STEEL
  3	141.203
  4	141.204
  5	141.205
  6	141.206

  
  

• Broad Curved Safety Lock Plate 4.5/5.0 is used to fix the Femoral shaft fracture.
• The curve in the plate easily fit over the Femur.
• Used with 4.5mm cortical and 5.0mm locking head screw.

• No. of Holes	Length mm	STAINLESS STEEL
  12	229	SF-619.12
  13	247	SF-619.13
  14	265	SF-619.14
  15	282	SF-619.15
  16	300	SF-619.16
  17	318	SF-619.17
  18	336	SF-619.18

• No. of Holes	Length mm	TITANIUM
  12	229	Ti-SF-619.12
  13	247	Ti-SF-619.13
  14	265	Ti-SF-619.14
  15	282	Ti-SF-619.15
  16	300	Ti-SF-619.16
  17	318	Ti-SF-619.17
  18	336	Ti-SF-619.18

• Pelvis Safety Lock Plate. These plates are indicated for the fractures of Pubic bone with or without disruption of Pubic symphysis.
• It is not recommended during pregnancy.
• Anatomically designed plate fits over Pubic arch.

No. of Holes	STAINLESS STEEL
4	SF-648.004
6	SF-648.006

No. of Holes	TITANIUM
4	Ti-SF-648.004
6	Ti-SF-648.006

• The Proximal Femoral Safety Lock Plate 4.5/5.0/7.3 is intended for fractures of the femur including: fractures of the trochanteric region , trochanteric simple, cervicotrochanteric region, trochanterodiaphyseal, multifragmentary pertrochanteric, intertrochanteric, intertrochanteric reversed, or transverse or with additional fracture of medial cortex.
• Fractures of the proximal end of the femur combined with ispsilateral shaft fractures, metastatic fracture of the proximal femur and osteotomies of the proximal femur.
• All holes of the shaft accommodate cortex screw 4.5mm, self Tapping and safety Lock Screw 5.0mm.

No. ofHoles	Lengthin mm	STAINLESS STEEL
		Left	Right
2	139	SF-656.002L	SF-656.002R
4	175	SF-656.004L	SF-656.004R
6	211	SF-656.006L	SF-656.006R
8	247	SF-656.008L	SF-656.008R
10	283	SF-656.010L	SF-656.010R
12	319	SF-656.012L	SF-656.012R
14	355	SF-656.014L	SF-656.014R
16	391	SF-656.016L	SF-656.016R

No. ofHoles	Lengthin mm	TITANIUM
		Left	Right
2	139	Ti-SF-656.002L	Ti-SF-656.002R
4	175	Ti-SF-656.004L	Ti-SF-656.004R
6	211	Ti-SF-656.006L	Ti-SF-656.006R
8	247	Ti-SF-656.008L	Ti-SF-656.008R
10	283	Ti-SF-656.010L	Ti-SF-656.010R
12	319	Ti-SF-656.012L	Ti-SF-656.012R
14	355	Ti-SF-656.014L	Ti-SF-656.014R
16	391	Ti-SF-656.016L	Ti-SF-656.016R

• Distal Femoral Safety Lock Plate 4.5/5.0 are intended for buttressing multifragmentary distal femur fractures including: supracondylar, intra-articular condylar, periprosthetic fractures and fractures in normal or osteopenic bone, nonunions and malunions, and osteotomies of the femur.
• All holes accommodate Cortex screw 4.5mm, Self Tapping and Safety Lock Screw 5.0mm.

No. ofHoles	Lengthin mm	STAINLESS STEEL
		Left	Right
5	156	SF-635.005L	SF-635.005R
6	176	SF-635.006L	SF-635.006R
7	196	SF-635.007L	SF-635.007R
8	216	SF-635.008L	SF-635.008R
9	236	SF-635.009L	SF-635.009R
10	256	SF-635.010L	SF-635.010R
11	276	SF-635.011L	SF-635.011R
12	296	SF-635.012L	SF-635.012R
13	316	SF-635.013L	SF-635.013R

Indication:

The Metaphyseal plates are indicated for extra-articular fractures of the metaphyseal area that extend into the shaft. The Metaphyseal plate 3.5/4.5/5.0 is indicated for distal tibial and proximal humeral fractures.

Plate Features:

• Safety Locking combi-holes allow uncompromising combinations:The combi-hole allows an internal plate fixation using standard screws, angular stable locking screws, or a combination of both. This takes into account the most diverse intraoperative requirements.
• Angular stability allows for better fixation:The angle- and axis-stable locking screws prevent loss of reduction underload. A precise anatomical contouring of the plate is unnecessary when using this system as a locking internal fixator.
• Easier plate contouring due to thinned plate profile:The plate design facilitates anatomical contouring considerably, whilst taking into account the distinctive features of the metaphyseal bone area (e.g. complex bone shapes, thin soft tissue envelope).
• Extra-articular fixation with the advantage of angled locking screws:The two distal holes in the thinned area of the plate, which are angled at 11 towards the centre of the plate, allow an optimal application of the locking screws in the epiphyseal area.
• Improved vascularization of the periost due to plate under cuts that reduce the plate-to-bone contact.
• The elongated hole in the shaft optimizes fine tuning of the reduction in the longitudinal axis.
• The Metaphyseal Safety Lock Plates have both compression and locking holes. The plates accept 3.5 / 4.5 mm cortex, 3.5, 4.0, & 5.0 mm safety lock and 4.0mm / 6.5 mm cancellous screws.

No. of Holes	Length mm	STAINLESS STEEL
5+3	118	SF-615.03
5+4	136	SF-615.04
5+5	154	SF-615.05
5+6	172	SF-615.06
5+7	190	SF-615.07
5+8	208	SF-615.08
5+9	226	SF-615.09
5+11	262	SF-615.11
5+13	298	SF-615.13
5+15	334	SF-615.15

Indications:

The LCP Metaphyseal Plate for distal medial tibia is a preshaped plate that allows optimal treatment of juxta-articular fractures of the distal tibia extending into the shaft area. This plate takes the following characteristics of the distal tibia into account:

• Thin, soft tissue coverage.
• Complex anatomic shape of the bone.

Plate Features:

• Anatomically precontoured plate: The anatomical shape of the plate is especially designed to fit the complex shape of the distal part of the bone. A twist of the plate optimizes the fit on the tibia.
• Thinned plate profile: The distal part of the plate is tapered to preserve the thin soft tissue envelope of the distal tibia.
• Optimal distal application of the locking head screws: The specific orientation of the four distal screws allows optimal fixation in the epiphyseal area without penetrating the articulation.
• Improved vascularisation of the bone due to plate undercuts that reduce the plate-to-bone contact.

No. ofHoles	Lengthin mm	STAINLESS STEEL
		Left	Right
4+4	123	SF-617.04L	SF-617.04R
4+5	141	SF-617.05L	SF-617.05R
4+6	159	SF-617.06L	SF-617.06R
4+7	177	SF-617.07L	SF-617.07R
4+8	195	SF-617.08L	SF-617.08R
4+9	213	SF-617.09L	SF-617.09R
4+10	231	SF-617.10L	SF-617.10R
4+12	267	SF-617.11L	SF-617.11R
4+14	303	SF-617.12L	SF-617.12R
4+16	339	SF-617.13L	SF-617.13R
4+18	375	SF-617.14L	SF-617.14R
4+20	411	SF-617.15L	SF-617.15R

No. ofHoles	Lengthin mm	TITANIUM
		Left	Right
4+4	123	Ti-SF-617.04L	Ti-SF-617.04R
4+5	141	Ti-SF-617.05L	Ti-SF-617.05R
4+6	159	Ti-SF-617.06L	Ti-SF-617.06R
4+7	177	Ti-SF-617.07L	Ti-SF-617.07R
4+8	195	Ti-SF-617.08L	Ti-SF-617.08R
4+9	213	Ti-SF-617.09L	Ti-SF-617.09R
4+10	231	Ti-SF-617.10L	Ti-SF-617.10R
4+12	267	Ti-SF-617.11L	Ti-SF-617.11R
4+14	303	Ti-SF-617.12L	Ti-SF-617.12R
4+16	339	Ti-SF-617.13L	Ti-SF-617.13R
4+18	375	Ti-SF-617.14L	Ti-SF-617.14R
4+20	411	Ti-SF-617.15L	Ti-SF-617.15R

• Spoon Plate 4.5. These plates are primarily indicated for pilon fractures that have extensive anterior crushing and provides good posture support.
• It is also used in the treatment of metaphyseal non-unions of distal tibia and the distal humerus.
• Spoon Plate 4.5s are designed to fit over anterior crest of tibia.
• It should be bent pre-operative to accurately match the anatomy of the segment of bone to be fixed. An oval hole helps in temporary fixation of the plate prior to final adjustment and fixation.
• Holes of the plate allow 4.5 mm cortex screws.

• No. of Holes	TITANIUM
  5	Ti-155.105
  6	Ti-155.106

• Proximal Lateral Tibial Plate. These plates are indicated for metaphyseal, extra and intra articular fractures of the proximal tibia.
• Anatomically designed plate fits over proximal tibia from lateral side.
• These plates are designed separately for both right and left tibia and are available in a variety of lengths.
• All holes of the plate allow 4.5 mm cortical screws.

No. of Holes	TITANIUM
	Left	Right
3	Ti-622.003L	Ti-622.003R
5	Ti-622.005L	Ti-622.005R
7	Ti-622.007L	Ti-622.007R
9	Ti-622.009L	Ti-622.009R
11	Ti-622.011L	Ti-622.011R
13	Ti-622.013L	Ti-622.013R

• Distal Tibial Plate is indicated for temporary internal fixation and stabilization of osteotomies and fractures, including Comminuted fractures, Supracondylar fractures, Intra-articular and extra-articular condylar fractures, Fractures in osteopenic bone, Nonunions and Malunions.
• The anatomical shape of the plates matches the shape of the distal tibia.
• These plates are designed separately for both right and left tibia and are available in a variety of lengths.
• All holes of the plate allow 4.5 mm cortical screws.

No. of Holes	STAINLESS STEEL
	Left	Right
3	623.003L	623.003R
5	623.005L	623.005R
7	623.007L	623.007R
9	623.009L	623.009R
11	623.011L	623.011R
13	623.013L	623.013R

No. of Holes	TITANIUM
	Left	Right
3	Ti-623.003L	Ti-623.003R
5	Ti-623.005L	Ti-623.005R
7	Ti-623.007L	Ti-623.007R
9	Ti-623.009L	Ti-623.009R
11	Ti-623.011L	Ti-623.011R
13	Ti-623.013L	Ti-623.013R

• Mini Straight Plates for 2mm Screws is used for i) Diaphysis Noncomminuted ii) Diaphysis wedge Comminuted iii) Diaphysis Comminuted fracture of both Hand and Foot Phalanges.
• All holes of plate support 1.5 and 2.0 mm cortical screw.

No. of Holes	Stainless Steel
2	121.102
3	121.103
4	121.104
5	121.105
6	121.106
7	121.107
8	121.108

No. of Holes	Titanium
2	Ti-121.102
3	Ti-121.103
4	Ti-121.104
5	Ti-121.105
6	Ti-121.106
7	Ti-121.107
8	Ti-121.108

Specifications :

• Power Output : 85W
• Speed : 0-630(r.p.m)
• Torque : 3.6Nm
• Noise : 40 (db)
• Battery : 9.6 (V), Ni-Mh, 1800 mA/h
• Sterilization : 135 C

Usage:Trauma Operation. Dual function, stepless variable speed control

Indications

NET MIDFACE CMF Plating System is intended for use in selective trauma of the midface and craniofacial skeleton; craniofacial surgery; reconstructive procedures; and selective orthognathic surgery of the maxilla and chin.

Contraindications

The use in areas with active or latent infection or insufficient quantity or quality of bone.

Screwin mm	No. ofHoles	Stainless Steel
		Left	Right
2.0	4	53.20L	53.20R
2.0	6	53.30L	53.30R

Screwin mm	No. ofHoles	Titanium
		Left	Right
2.0	4	Ti-53.20L	Ti-53.20R
2.0	6	Ti-53.30L	Ti-53.30R

Indications

NET MIDFACE CMF Plating System is intended for use in selective trauma of the midface and craniofacial skeleton; craniofacial surgery; reconstructive procedures; and selective orthognathic surgery of the maxilla and chin.

Contraindications

The use in areas with active or latent infection or insufficient quantity or quality of bone.

Screw in mm	No. of Holes	Stainless Steel
2.0	2 X 2	47.22
2.0	3 X 2	47.32
2.0	4 X 2	47.42
2.0	4 X 4	47.44

Screw in mm	No. of Holes	Titanium
2.0	2 X 2	Ti-47.22
2.0	3 X 2	Ti-47.32
2.0	4 X 2	Ti-47.42
2.0	4 X 4	Ti-47.44

Indications

NET MIDFACE CMF Plating System is intended for use in selective trauma of the midface and craniofacial skeleton; craniofacial surgery; reconstructive procedures; and selective orthognathic surgery of the maxilla and chin.

Contraindications

The use in areas with active or latent infection or insufficient quantity or quality of bone.

Screw in mm	No. of Holes	Stainless Steel
2.0	2 X 2	48.22
2.0	3 X 2	48.32
2.0	4 X 2	48.42
2.0	4 X 4	48.44

Screw in mm	No. of Holes	Titanium
2.0	2 X 2	Ti-48.22
2.0	3 X 2	Ti-48.32
2.0	4 X 2	Ti-48.42
2.0	4 X 4	Ti-48.44

Indications

NET MIDFACE CMF Plating System is intended for use in selective trauma of the midface and craniofacial skeleton; craniofacial surgery; reconstructive procedures; and selective orthognathic surgery of the maxilla and chin.

Contraindications

The use in areas with active or latent infection or insufficient quantity or quality of bone.