NARANG MEDICAL LIMITED

Naraina, Delhi

• Our Perfect Tibial Nail is indicated for fractures in the Tibial Shaft as well as for Metaphyseal and certain intraarticular fracture of the tibial head and pilon tibaile with :
• Advanced Nail Design : New Anatomic bend for ease of nail insertion. Titanium Alloy for improved mechanical and fatigue propertieis.
• Advanced Distal Locking Options : Distal Oblique Locking Option to prevent soft tissue damage and increase stability of the distal fragment.
• Versatile Proximal Locking Option : Three unique and innovative locking options, in combination with Cancellous Dual Core locking Screws to increase the stability of the proximal fragment for proximal third fractures.
• Medio Lateral Locking options enable primary compression or secondary controlled dynamization.
• Same Nail for Right & Left Tibia
• Use with Instrument Set - AS075

• Use 4.35mm Locking Screw for Nails Dia. 8mm & 9mm and
• Use 4.8mm Locking Screw for Nails Dia. 10mm & 11mm and
• Use 4.8mm Cancellous Locking Screw (Dual Core) for 3 most Proximal Holes.
• Note: Distal Jig will work upto Nail Length 375 and beyond that use C-Arm both on the Nails Page and on the Jig Photos.

• Our Perfect Femoral Nail with standard locking is indicated for fractures in femoral shaft and with Recon Locking for fractures in the femoral shaft in combination with femoral neck fractures. Additionally our Perfect Femoral Nail is indicated for fractures in the subtrochanteric section with :
• Advanced Anatomical Nail Design : Optimal fit in bone & easier insertion and extraction. Titanium Alloy for improved mechanical and fatigue properties.
• Optimized Locking Options : Standard Locking of femoral shaft fractures & Recon Locking in subtrochanteric fractures and comined femoral shaft and neck fractures.
• Optimal Lateral entry point : Time saving surgical technique, Easier and safer access to entry site, Less soft tissue damage.
• Improved Locking Options : Higher angular stability through multiplaner screws, less damage of soft tissues and improved mechanical resistance.
• Anatomical Design with Right and Left Nail.
• Use with Instrument Set - AS074

• Use 4.8mm Locking Screw for Standard Locking
• Use 6.35mm Hip Screws for Recon Locking
• Note: Distal Jig will work upto the length of 440mm.For longer nails C arm is required for Distal Locking

• Interlocking Nails are used to fix the fractures of long bones. These are inserted in the bone, and are transfixed by screws at Proximal and Distal ends of the bones.

• Use 4.8mm Locking Screw for Standard Locking
• Use 6.35mm Hip Screws for Recon Locking
• Note: Distal Jig will work upto the length of 440mm. For longer nails C arm is required for Distal Locking.

• Our Perfect Femoral Nail with standard locking is indicated for fractures in femoral shaft and with Recon Locking for fractures in the femoral shaft in combination with femoral neck fractures. Additionally our Perfect Femoral Nail is indicated for fractures in the subtrochanteric section with :
• Advanced Anatomical Nail Design : Optimal fit in bone & easier insertion and extraction. Titanium Alloy for improved mechanical and fatigue properties.
• Optimized Locking Options : Standard Locking of femoral shaft fractures & Recon Locking in subtrochanteric fractures and comined femoral shaft and neck fractures.
• Optimal Lateral entry point : Time saving surgical technique, Easier and safer access to entry site, Less soft tissue damage.
• Improved Locking Options : Higher angular stability through multiplaner screws, less damage of soft tissues and improved mechanical resistance.
• Anatomical Design with Right and Left Nail.
• Use with Instrument Set - AS074

Drill Bit : 4mm

• Straight Kuntscher Cloverleaf Nails for Femur is used to treat Simple Transverse, Short Oblique or Comminuted Diaphyseal fractures of the Femur.
• Kuntscher Cloverleaf Nails provide proper support to the bone for faster healing.
• Use with Instrument Set - AS121

• Length(cm)	STAINLESS STEEL - Diameter in mm
  	6 mm	7 mm	8 mm	9 mm	10 mm	11 mm	12 mm	13 mm	14 mm	15 mm
  20	181.06-20	181.07-20	-	-	-	-	-	-	-	-
  21	181.06-21	181.07-21	-	-	-	-	-	-	-	-
  22	181.06-22	181.07-22	-	-	-	-	-	-	-	-
  23	181.06-23	181.07-23	-	-	-	-	-	-	-	-
  24	181.06-24	181.07-24	181.08-24	181.09-24	-	-	-	-	-	-
  25	181.06-25	181.07-25	181.08-25	181.09-25	-	-	-	-	-	-
  26	181.06-26	181.07-26	181.08-26	181.09-26	181.10-26	181.11-26	181.12-26	181.13-26	181.14-26	181.15-26
  27	181.06-27	181.07-27	181.08-27	181.09-27	181.10-27	181.11-27	181.12-27	181.13-27	181.14-27	181.15-27
  28	181.06-28	181.07-28	181.08-28	181.09-28	181.10-28	181.11-28	181.12-28	181.13-28	181.14-28	181.15-28
  29	181.06-29	181.07-29	181.08-29	181.09-29	181.10-29	181.11-29	181.12-29	181.13-29	181.14-29	181.15-29
  30	181.06-30	181.07-30	181.08-30	181.09-30	181.10-30	181.11-30	181.12-30	181.13-30	181.14-30	181.15-30
  31	181.06-31	181.07-31	181.08-31	181.09-31	181.10-31	181.11-31	181.12-31	181.13-31	181.14-31	181.15-31
  32	181.06-32	181.07-32	181.08-32	181.09-32	181.10-32	181.11-32	181.12-32	181.13-32	181.14-32	181.15-32
  33	181.06-33	181.07-33	181.08-33	181.09-33	181.10-33	181.11-33	181.12-33	181.13-33	181.14-33	181.15-33
  34	181.06-34	181.07-34	181.08-34	181.09-34	181.10-34	181.11-34	181.12-34	181.13-34	181.14-34	181.15-34
  35	181.06-35	181.07-35	181.08-35	181.09-35	181.10-35	181.11-35	181.12-35	181.13-35	181.14-35	181.15-35
  36	181.06-36	181.07-36	181.08-36	181.09-36	181.10-36	181.11-36	181.12-36	181.13-36	181.14-36	181.15-36
  37	181.06-37	181.07-37	181.08-37	181.09-37	181.10-37	181.11-37	181.12-37	181.13-37	181.14-37	181.15-37
  38	181.06-38	181.07-38	181.08-38	181.09-38	181.10-38	181.11-38	181.12-38	181.13-38	181.14-38	181.15-38
  39	181.06-39	181.07-39	181.08-39	181.09-39	181.10-39	181.11-39	181.12-39	181.13-39	181.14-39	181.15-39
  40	181.06-40	181.07-40	181.08-40	181.09-40	181.10-40	181.11-40	181.12-40	181.13-40	181.14-40	181.15-40
  41	-	-	181.08-41	181.09-41	181.10-41	181.11-41	181.12-41	181.13-41	181.14-41	181.15-41
  42	-	-	181.08-42	181.09-42	181.10-42	181.11-42	181.12-42	181.13-42	181.14-42	181.15-42
  43	-	-	181.08-43	181.09-43	181.10-43	181.11-43	181.12-43	181.13-43	181.14-43	181.15-43
  44	-	-	181.08-44	181.09-44	181.10-44	181.11-44	181.12-44	181.13-44	181.14-44	181.15-44
  45	-	-	-	-	181.10-45	181.11-45	181.12-45	181.13-45	181.14-45	181.15-45
  46	-	-	-	-	181.10-46	181.11-46	181.12-46	181.13-46	181.14-46	181.15-46
  47	-	-	-	-	181.10-47	181.11-47	181.12-47	181.13-47	181.14-47	181.15-47
  48	-	-	-	-	181.10-48	181.11-48	181.12-48	181.13-48	181.14-48	181.15-48

• Curved Kuntscher Cloverleaf Nail for Tibia are used to treat Simple Transverse, Short Oblique or Comminuted Diaphyseal fracture of Tibia.
• The bend of nail facilitates easy Anterior insertion.
• Kuntscher Cloverleaf Nails provide proper support to the bone for faster healing.
• Use with Instrument Set - AS121

• This straight plate is designed to minimize plate and bone contact area (limited-contact profile). The all compression holes are designed to accommodate both Saftey Locking and standard screws.
• All holes accommodate Cortex screw 3.5mm, Self Tapping and Safety Lock Screw 3.5mm Self Tapping.
• The LC-DCP Safety Plate 3.5 is indicated for Fixation of fractures of the clavicle, scapula, olecranon, humerus, radius, ulna, pelvis, distal tibia, fibula, particularly in osteopenic bone for adult patients.

• All holes of Saftey Lock T Plate 3.5, Right Angled accommodate Cortex Screw 3.5mm, Self Tapping and Safety lock screw 3.5 mm-Self Tapping.
• The Self Lock T Plate 3.5mm, Right Angled is indicated for fixation of fractures of the clavicle, scapula, olecranon, humerus, radius, ulna, pelvis, distal tibia, fibula, particularly in osteopenic bone for adult patients.

• All holes of safety Lock T Plate 3.5, Oblique Angled accommodate Cortex screw 3.5mm, Self Tapping and Safety Lock Screw 3.5mm- Self Tapping.
• The Safety Lock T Plate 3.5, Oblique Angled is indicated for fixation of fractures of the clavicle, scapula, olecranon, humerus, radius, ulna, pelvis, distal tibia, fibula, particularly in osteopenic bone for adult patients.

Indications:

The LCP Medial Distal Tibia Plates without Tab are intended for:

• Fixation of complex intra- and extra-articular fractures of the distal tibia.
• Osteotomies of the distal tibia.

Plate Features:

• These plates can be anatomically contoured to match with the Distal Medial Tibia.
• The plates are designed for both right and left Tibia and are available in a variety of lengths.
• The holes in plate allow 3.5 mm Safety Lock and 3.5 mm Cortical screws.
• Head of plate is low profile for minimal prominence on medial malleolus.
• Two different plate designs to fit right and left distal tibia (indicated with R or L on the plate.)
• Rounded edges to minimize soft tissue irritation.

Indications:

• For medial buttressing of comminuted distal tibial fractures.
• For comminuted humeral head fractures.
• The Safety locking feature provide angular stability.
• The holes on head allow only 3.5 mm Safety Lock screws and shaft allows both 3.5 mm Safety Lock and Cortical screws.

• All holes Reconstruction Safety Lock Plate 3.5- straight accommodate Cortex Srew 3.5mm, Self Tapping and safety Lock Screw 3.5mm- Self Tapping.
• The Reconstruction Safety Lock Plate 3.5- Straight is indicated for fixation of fractures of the clavicle, Scapula, olecranon, humerus, radius, ulna, pelvis, distal tibia, fibula, particularly in osteopenic bone for adult patients.

• Reconstruction Safety Lock Plate 3.5 - Straight is used in the reconstruction of the pelvic fractures
• Side cuts on these plates make them more flexible and widens the spectrum of their use.
• These plates are used with 3.5mm cortical and 3.5 mm safety lock screw.

• Reconstruction Safety Lock Plate 3.5 - Straight is used in the reconstruction of the pelvic fractures.
• Side cuts on these plates make them more flexible and widens the spectrum of their use.
• These plates are used with 3.5 mm safety lock screw.

• No. of Holes	STAINLESS STEEL
  5	SF-444.205C
  6	SF-444.206C
  7	SF-444.207C
  8	SF-444.208C
  9	SF-444.209C
  10	SF-444.210C
  11	SF-444.211C
  12	SF-444.212C
  13	SF-444.213C
  14	SF-444.214C
  16	SF-444.216C
  18	SF-444.218C

• No. of Holes	TITANIUM
  5	Ti-SF-444.205C
  6	Ti-SF-444.206C
  7	Ti-SF-444.207C
  8	Ti-SF-444.208C
  9	Ti-SF-444.209C
  10	Ti-SF-444.210C
  11	Ti-SF-444.211C
  12	Ti-SF-444.212C
  13	Ti-SF-444.213C
  14	Ti-SF-444.214C
  16	Ti-SF-444.216C
  18	Ti-SF-444.218C

Indications:

• Dorsally displaced distal radius fractures.
• Combination of distal radius with carpal and metacarpal fractures.
• Corrective osteotomies.

Plate Features:

• Anatomically contoured Dorsal Distal Radius Safety Lock L-plate 2.4.
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

Indications:

• Dorsally displaced distal radius fractures.
• Combination of distal radius with carpal and metacarpal fractures.
• Corrective osteotomies.

Plate Features:

• Anatomically contoured Dorsal Distal Radius Safety Lock L-plate 2.4 - Oblique.
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

• AngleType	Head/ShaftHoles	Stainless Steel
  Right	3/3	SF-127.303R
  Right	3/4	SF-127.304R
  Left	3/3	SF-127.303L
  Left	3/4	SF-127.304L

• AngleType	Head/ShaftHoles	TITANIUM
  Right	3/3	Ti-SF-127.303R
  Right	3/4	Ti-SF-127.304R
  Left	3/3	Ti-SF-127.303L
  Left	3/4	Ti-SF-127.304L

Indications:

• Dorsally displaced distal radius fractures.
• Combination of distal radius with carpal and metacarpal fractures.
• Corrective osteotomies.

Plate Features:

• Anatomically contoured Dorsal Distal Radius Safety Lock T-plate 2.4.
• Locking plates provides anatomical reduction. It means adaptation of fracture fragments to restore normal anatomy.
• stability in fixation: It gives stability in fixation as required by the nature of fracture. Plate provides optimal compression and stability.
• Plate preserves blood supply to soft tissues and bone.

• Head/ShaftHoles	TITANIUM
  3/3	Ti-SF-128.303
  3/4	Ti-SF-128.304

• Head/ShaftHoles	Stainless Steel
  3/3	SF-128.303
  3/4	SF-128.304

  
  

• Y-Reconstruction Plates are used for the fractures of Distal Humerus.
• Side cuts on these plates make them more flexible.
• All holes of the plate allow 3.5 mm cortex screws.

• Dynamic Compression Plate 3.5
• These plates are indicated for fixation of fractures and nonunions of the Clavicle, Scapula, Olecranon, Humerus, Radius, Ulna, Pelvis, Distal tibia, and Fibula.
• The oval shape hole is designed to create dynamic pressure between the fractured bone fragments.
• All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous screws.

• LC-DCP Plate 3.5
• These plates are indicated for fixation of fractures and nonunions of the Clavicle, Scapula, Olecranon, Humerus, Radius, Ulna, Pelvis, Distal tibia, and Fibula.
• The oval shaped hole is designed to create dynamic pressure between the fractured bone fragments.
• Low Contact plate design reduces the plate and bone contact, this feature reduces vascular trauma.
• All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous screws.
• For Ulna & Radius. Fixation with 3.5mm & 4mm screws.

• No. of Holes	STAINLESS STEEL
  3	147.103
  4	147.104
  5	147.105
  6	147.106
  7	147.107
  8	147.108
  9	147.109
  10	147.110
  11	147.111
  12	147.112
  13	147.113
  14	147.114

• No. of Holes	TITANIUM
  3	Ti-147.103
  4	Ti-147.104
  5	Ti-147.105
  6	Ti-147.106
  7	Ti-147.107
  8	Ti-147.108
  9	Ti-147.109
  10	Ti-147.110
  11	Ti-147.111
  12	Ti-147.112
  13	Ti-147.113
  14	Ti-147.114

• T-Plate 3.5, Oblique Angled
• These plates are indicated for Extra-articular, Partial articular and Complete articular fractures of Disal Radius.
• These plates are designed separately designed for left and right hand.
• All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous Screws.
• For the Left and Right Radius. Fixation with 3.5mm & 4mm screws. Head with three holes.

• No. of Holes	STAINLESS STEEL
  	Left	Right
  3	142.103L	142.103R
  4	142.104L	142.104R
  5	142.105L	142.105R
  6	142.106L	142.106R

• No. of Holes	TITANIUM
  	Left	Right
  3	Ti-142.103L	Ti-142.103R
  4	Ti-142.104L	Ti-142.104R
  5	Ti-142.105L	Ti-142.105R
  6	Ti-142.106L	Ti-142.106R

• Semi Tubular Plate 3.5
• These plates are indicated for Diaphyseal Simple, Diaphyseal Wedge and Diaphyseal Complex fractures of Fibula, Metatarsals, and Metacarpals.
• All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous screws.

• No. of Holes	STAINLESS STEEL
  2	143.102
  3	143.103
  4	143.104
  5	143.105
  6	143.106
  7	143.107
  8	143.108
  9	143.109
  10	143.110
  12	143.112

• No. of Holes	TITANIUM
  2	Ti-143.102
  3	Ti-143.103
  4	Ti-143.104
  5	Ti-143.105
  6	Ti-143.106
  7	Ti-143.107
  8	Ti-143.108
  9	Ti-143.109
  10	Ti-143.110
  12	Ti-143.112

• The 3.5 mm Cloverleaf Plates indicated for intra-articular fractures of the distal tibia and proximal humerus.
• All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous screws.
• For distal Intra-Articular tibial Fractures.
• Fixation with 3.5mm & 4.0mm Screws.

• Reconstruction Plates 3.5 - Straight is used to fix the pelvic, clavicle and calcaneal fractures.
• Side cuts on these plates make them more flexible and widens the spectrum of their use.
• These plates are used with 3.5mm cortical, 3.5 mm safety locking and 4.0 mm cancellous screws.

• Reconstruction Plate 3.5 - Curved is used in the reconstruction of the pelvic fractures.
• These plates are contoured to fit perfectly to the anatomy of the Pelvis and Acetabulum.
• Side cuts on these plates make them more flexible and widens the spectrum of their use.
• These plates are used with 3.5mm cortical, 3.5 mm safety locking and 4.0 mm cancellous screws.

• No. of Holes	STAINLESS STEEL
  5	144.105C
  6	144.106C
  7	144.107C
  8	144.108C
  9	144.109C
  10	144.110C
  11	144.111C
  12	144.112C
  13	144.113C
  14	144.114C
  16	144.116C
  18	144.118C

• No. of Holes	TITANIUM
  5	Ti-144.105C
  6	Ti-144.106C
  7	Ti-144.107C
  8	Ti-144.108C
  9	Ti-144.109C
  10	Ti-144.110C
  11	Ti-144.111C
  12	Ti-144.112C
  13	Ti-144.113C
  14	Ti-144.114C
  16	Ti-144.116C
  18	Ti-144.118C

• One Third Tubular Plate is used as a buttress plate for fibula, metatarsals, and metacarpals bones.
• The plate holes support 3.5mm cortex and 4.0mm cancellous or cannulated screws.
• The plate neutralizes any shearing or bending force which could disrupt an unprotected lag screw fixation.

• One-third Tubular Plate 3.5 with Collar is used as a buttress plate for fibula, metatarsals, and metacarpals bones.
• The plate holes support 3.5mm cortex and 4.0mm cancellous or cannulated screws.
• The plate neutralizes any shearing or bending force which could disrupt an unprotected lag screw fixation.

• The Narrow LC-DCP safety 4.5/5.0 is indicated for fixation of various long bones, such as the humerus, femur and tibia and for use in fixation of peri-prosthetic fractures, osteopenic bone and fixation of non-unions or malunions in adult patients.
• All holes accommodate Cortex Screw 4.5mm, Self Tapping and safety Lock Screw 5.0mm

• No. of Holes	Length in mm	STAINLESS STEEL
  5	98	SF-150.105
  6	116	SF-150.106
  7	134	SF-150.107
  8	152	SF-150.108
  9	170	SF-150.109
  10	188	SF-150.110
  11	206	SF-150.111
  12	224	SF-150.112
  13	242	SF-150.113
  14	260	SF-150.114
  15	278	SF-150.115
  16	296	SF-150.116
  18	332	SF-150.118
  20	368	SF-150.120
  22	404	SF-150.122
  24	440	SF-150.124

• No. of Holes	Length in mm	TITANIUM
  5	98	Ti-SF-150.105
  6	116	Ti-SF-150.106
  7	134	Ti-SF-150.107
  8	152	Ti-SF-150.108
  9	170	Ti-SF-150.109
  10	188	Ti-SF-150.110
  11	206	Ti-SF-150.111
  12	224	Ti-SF-150.112
  13	242	Ti-SF-150.113
  14	260	Ti-SF-150.114
  15	278	Ti-SF-150.115
  16	296	Ti-SF-150.116
  18	332	Ti-SF-150.118
  20	368	Ti-SF-150.120
  22	404	Ti-SF-150.122
  24	440	Ti-SF-150.124

• Condylar Femoral Safety Lock Plate 4.5/5.0/6.5. These plates are indicated for Intra-articular and Extra-articular fractures of lateral or medial condyle & Supracondylar fractures of femoral condyle.
• Plates are designed separately for left and right femur.
• All head holes support 6.5 mm safety locking cancellous screw and shaft holes support 4.5 mm cortex and 5.0 mm safety lock screws.

• No. ofHoles	Lengthin mm	STAINLESS STEEL
  		Left	Right
  6	170	SF-164.006L	SF-164.106R
  8	206	SF-164.008L	SF-164.108R
  10	242	SF-164.010L	SF-164.110R
  12	278	SF-164.012L	SF-164.112R
  14	314	SF-164.014L	SF-164.114R
  16	350	SF-164.016L	SF-164.116R

• No. ofHoles	Lengthin mm	TITANIUM
  		Left	Right
  6	170	Ti-SF-164.006L	Ti-SF-164.106R
  8	206	Ti-SF-164.008L	Ti-SF-164.108R
  10	242	Ti-SF-164.010L	Ti-SF-164.110R
  12	278	Ti-SF-164.012L	Ti-SF-164.112R
  14	314	Ti-SF-164.014L	Ti-SF-164.114R
  16	350	Ti-SF-164.016L	Ti-SF-164.116R

• Narrow Dynamic Compression Plate 4.5. These plates are indicated for fixation of various long bones, such as the humerus, tibia and femur. These are also used in fixation of peri-prosthetic fractures, osteopenic bone and fixation of nonunions or malunions in adult patients.
• It is particularly used as tension band plate for fracture of humerus and tibia.
• It is not indicated for fractures of femur.
• All holes accept 4.5 mm cortical screws and end holes accept 6.5 mm cancellous screws.

• No. of Holes	STAINLESS STEEL
  4	157.104
  5	157.105
  6	157.106
  7	157.107
  8	157.108
  9	157.109
  10	157.110
  11	157.111
  12	157.112
  13	157.113
  14	157.114
  15	157.115
  16	157.116
  17	157.117
  18	157.118

• No. of Holes	TITANIUM
  4	Ti-157.104
  5	Ti-157.105
  6	Ti-157.106
  7	Ti-157.107
  8	Ti-157.108
  9	Ti-157.109
  10	Ti-157.110
  11	Ti-157.111
  12	Ti-157.112
  13	Ti-157.113
  14	Ti-157.114
  15	Ti-157.115
  16	Ti-157.116
  17	Ti-157.117
  18	Ti-157.118

• Narrow Limited Contact Dynamic Compression Plate. These plates are indicated for fixation of various long bones, such as the humerus, femur and tibia. These are also used in fixation of peri-prosthetic fractures, osteopenic bone and fixation of nonunions and malunions in adult patients.
• The oval shaped hole is designed to create dynamic pressure between the fractured bone fragments.
• Limited Contact Dynamic Compression Plate has the advantage of reduced impairment of periosteal blood supply due to limited plate-periosteum contact. It reduces plate-bone contact and creates uniform strength along the plate. Reduction of the plate-bone contact minimizes the area of bone and minimizes periosteum that is damaged as a result of pressure and improves the potential for healing. The uniform strength of the plate allows smooth plate contouring and minimizes the affects of stress concentration from the plate holes without compromising overall plate strength.
• All holes of the plate allow 4.5 mm cortical screws and end holes of the plate allow 4.0 mm cancellous screws.

• Broad Dynamic Compression Plate 4.5. These plates are indicated for fixation of various long bones, such as the humerus, femur and tibia. These are also used in fixation of peri-prosthetic fractures, osteopenic bone and fixation of non-unions and malunions in adult patients.
• The oval shaped hole is designed to create dynamic pressure between the fractured bone fragments.
• All holes of the plate allow 4.5 mm cortical screws and end holes of the plate allow 4.0 mm cancellous screws.

• Broad LC-DCP 4.5. These plates are indicated for fixation of various long bones, such as the humerus, femur and tibia. These are also used in fixation of peri-prosthetic fractures, osteopenic bone and fixation of non-unions and malunions in adult patients.
• The oval shaped hole is designed to create dynamic pressure between the fractured bone fragments.
• Limited Contact Dynamic Compression Plate has the advantage of reduced impairment of periosteal blood supply due to limited plate-periosteum contact. It reduces plate-bone contact and creates uniform strength along the plate. Reduction of the plate-bone contact minimizes the area of bone and minimizes periosteum that is damaged as a result of pressure and improves the potential for healing. The uniform strength of the plate allows smooth plate contouring and minimizes the affects of stress concentration from the plate holes without compromising overall plate strength.
• All holes of the plate allow 4.5 mm cortical screws and end holes of the plate allow 6.5 mm cancellous screws.

• Semi-Tubular Plate 4.5. These plates are primarily indicated for areas of low stress such as forearm-radius, and are also recommended for the fractures of fibula.
• Compression is applied by eccentric positioning of the screws against the side of the screw hole furthest from the fracture line.
• Use 4.5 mm cortical screws and 6.5 mm cancellous screws for the fixation.

Shaft with DCP dynamic compression holes.
In the two shaft holes next to the head, two 4.5mm Cortex screws, length 68mm, are normally used.

Large Fragment - Standard Implants and Instruments are used to fix fractures of various long bones, such as Humerus, Femur and Tibia. These are also used in fixation of Peri-prosthetic fractures, Osteopenic bone and fixation of Non-unions or Malunions in adult patients. Large Fragment System comprises Safety Locking and Standard implants and instruments.The Plates are classified according to their functions.

• T-Plate 4.5 is primarily indicated for medial tibial plateau. It is also used in the distal tibia, medial distal femur and proximal humerus fractures.
• It is designed to use in metaphyseal regions of bone.
• It is bent to accurately match the anatomy of the segment of bone to be fixed.
• The long oval hole is provided for temporary fixation of the plate prior to final adjustment.
• Holes of the plate allow 4.5 mm cortex screws.

• T-Buttress Plate 4.5. These plates are indicated for the lateral plateau fracture of the tibia.
• It is designed to be used as a buttress plate in areas of thin metaphyseal cortical bone or to prevent the collapsing during the treatment of cancellous defects in that area.
• Prior to the surgery the plate may be bent to accurately match the anatomy of the segment of bone to be fixed.
• The long oval hole is provided for temporary fixation of the plate prior to final adjustment and fixation.
• Holes of the plate allow 4.5 mm cortex screws.

• Lateral Tibial Head Buttress Plate 4.5. These plates are indicated for treating shaft fractures, metaphyseal fractures, intra-articular and periprosthetic fractures of proximal tibia.
• Anatomically designed plate fits over proximal tibia from lateral side.
• These plates are designed separately for both right and left tibia and are available in a variety of lengths.
• All holes of the plate allow 4.5 mm cortical screws.
• With double bend, as buttress for tibial and humeral head fractures. Left angled for right leg.

• Lateral Tibial Head Buttress Plate 4.5. These plates are indicated for treating shaft fractures, metaphyseal fracture, intra-articular and periprosthetic fractures of proximal tibia.
• Anatomically designed plate fits over proximal tibia from lateral side.
• These plates are designed separately for both right and left tibia and are available in a variety of lengths.
• Low Contact plate design reduces the plate and bone contact, this feature reduces vascular trauma.
• All holes of the plate allow 4.5 mm cortical screws.

• No. ofHoles	STAINLESS STEEL
  	Left	Right
  5	165.305L	165.405R
  7	165.307L	165.407R
  9	165.309L	165.409R
  11	165.311L	165.411R
  13	165.313L	165.413R

• No. ofHoles	TITANIUM
  	Left	Right
  5	Ti-165.305L	Ti-165.405R
  7	Ti-165.307L	Ti-165.407R
  9	Ti-165.309L	Ti-165.409R
  11	Ti-165.311L	Ti-165.411R
  13	Ti-165.313L	Ti-165.413R

• 4.5mm Reconstruction Plate Straight. These plates are primarily indicated for reconstruction of the pelvis. It is also indicated for condylar, metaphyseal or diaphyseal fractures of small and long bones.
• The side cuts of these plates allow three dimensional contouring.
• All holes of the plate allow 4.5 mm cortical screws.

• Dynamic Compression Plate 2.7 is used for Diaphysis Noncomminuted (Spiral, Oblique or Transverse) and Diaphysis Wedge (Spiral, Bending or Comminuted) fractures of Metacarpals and Metatarsals.
• All holes of the plate support 2.7 mm cortical screws.
• Thickness (upto 6 Holes): 2mm(7 to 12 Holes): 2.5mm