Our Products
Our product range contains a wide range of Activated Carbon
Activated Carbon is porous from of Carbon manufactured from internal surface area.
The porosity Creates a remarkable power of Adsorption, an indispensable Process in industrial separation.
Purification, decolonization & recovery technique. The Carbon atoms at the internal surface of Activated Carbon.
Exert an attraction ( Vendor waars force ) on the molecules of surrounding liquid & gas & fixes on to its pore walls.
This is the basis of mechanism whereby Activated Carbons may be used to remove one or more components from a mixture.
GRANULES In GASPHASE adsorption, Granular Carbon is almost always used because the Pressure drop in the Carbon bed is of prime importance & Granular Carbon will allow sufficient flow with an acceptable pressure drop.
In LIQUID PHASE application both Granular & powered Carbon can be used .
DUE to SUPERIOR ADSORPTION HIGH DENSITY, LOW ATTRITION LOSS, use of Granules has resuited in increased service life, greater filter efficiency, fewer regeneration cycles & economy on Hardware costs.
Activated Carbon Granuces made from coconut shell charcoal is used when a single product or grade is being continuously treated in large quantities. Normally Granular Carbon can be regenerated which involves washing or burining off the impurities & restoring the pore structure.
SIEVE SIZE ANY STANDARED SIEVE SIZE TO SUIT CUSTOMERS REQUIREMENT .
APPLICATION OF GRANULAR ACTIVATED CARBON
odine No. mg / gm. Min | 500 | 700 | 800 | 900 | 1000 |
Ash Max % | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 |
Moisture Max % | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 |
Apparent Density gm / C. C. Min | 0.65 | 60 | 50 | 46 | 40 |
pH | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
pH | 6.75 | 6.75 | 6.75 | 6.75 | 6.75 |
Properties |
| P – 100 | P – 150 | P – 200 | P – 250 | P – 280 | P – 320 |
MB Value | Mg / g | 100 | 150 | 200 | 250 | 280 | 320 |
KMno4 | % min | 25 | 25 | 45 | 55 | 60 | 70 |
Ash | % max | 25 | 15 | 10 | 10 | 10 | 10 |
Iron (ppm) | Max | 1000 | 1000 | 800 | 800 | 600 | 500 |
Acid Soluble (HCL) | % max | 10 | 10 | 10 | 10 | 10 | 10 |
Water Soluble | %max | 5 | 5 | 3 | 2 | 2 | 1 |
L.O.D. | %max | 10 | 10 | 10 | 10 | 10 | 10 |
CL & SO4 | Max | USP | USP | USP | USP | USP | USP |
Ph |
| Alkaline | Alkaline | Alkaline | Alkaline | Alkaline | Alkaline |
Particle Size |
| 98% Passes through 100 Mesh | 98% Passes through 100 Mesh | 98% Passes through 100 Mesh | 98% Passes through 100 Mesh | 98% Passes through 100 Mesh | 98% Passes through 100 Mesh |
SPECIFICATION OF ACID WASHED POWDER GRADES
Properties |
| W – 150 | W – 200 | W – 250 | W – 280 | W – 320 |
MB Value | Mg / g | 150 | 200 | 250 | 280 | 320 |
KMno4 | % min | 25 | 35 | 45 | 55 | 65 |
Ash | % max | 8 | 5 | 4 | 4 | 3 |
Iron (ppm) | Max | 300 | 200 | 200 | 150 | 200 |
Acid Soluble (HCL) | % max | 5 | 3 | 2 | 2 | 1 |
Water Soluble | %max | 5 | 1 | 1 | 1 | 1 |
L.O.D. | max | 20 | 10 | 10 | 10 | 8 |
CL & SO4 | Max | USP | USP | USP | USP | USP |
Ph |
| 6.0 to 7.5 | 6.0 to 7.5 | 6.0 to 7.5 | 6.0 to 7.5 | 6.0 to 7.5 |
Particle Size |
| 98% Passes through 100 Mesh | 98% Passes through 100 Mesh | 98% Passes through 100 Mesh | 98% Passes through 100 Mesh | 98% Passes through 100 Mesh |
SPECIFICATION OF GRANULAR GRADES
Properties |
| G – 500 | G – 600 | G – 800 | G – 900 | G – 1000 |
Appearance |
| Black Granular | Black Granular | Black Granular | Black Granular | Black Granular |
Moisture | %max | 5 | 5 | 5 | 5 | 5 |
Hardness | Min | 85 | 85 | 95 | 95 | 95 |
Ph |
| 8 – 11 | 8 – 11 | 8 – 11 | 8 – 11 | 8 – 11 |
Iodine Adsorption | Min | 500 | 600 | 800 | 900 | 1000 |
Bulk Density |
| 0.55 + 0.1 | 0.55 + 0.1 | 0.55 + 0.1 | 0.55 + 0.1 | 0.55 + 0.1 |
Ash | %max | 5 | 5 | 5 | 5 | 5 |
Surface Areas | Min | 600 | 700 | 800 | 1000 | 1100 |
CTC Adsorption | Min | 25 | 45 | 45 | 60 | 65 |
Manu C. Patel(Numatik Engineers Pvt. Ltd.)
Shop No. 6, Bobby Pathak Avenue, Near Corporation Bank, Opp. Rotary Garden, C.S. Complex, Dahisar (E), Mumbai - 400068, Maharashtra, India
Share us via 
Write a Review
