Ahmedabad, Gujarat, India
Our Products
The series 500 valves consists of a wide range of float valves. Valves are available for horizontal mounting and vertical mounting. They are designed to controls the level of liquids in open tanks, ponds, basins, and other similar reservoirs. The series consists of 501-modulationg float valve, 502-float on-off globe type valve, 503- float angle type valve.
Valve closes when air/hyd./electrical pressure, signal is applied to the cover of control. Valve opens when air/hyd./electrical pressure is relieved from the cover of control. Manual by-pass allows manual opening of the valve. The Nu-Tech ACV 800 deluge valve meets all requirements for Indian listed, fire protection service. Valve opens on demand to provide water flow to the fire protection sprinkler system. Pilot system can be hydraulically, pneumatically/electrical signal or manually operated. Opening of valve is by loss of control pressure or by manual opening.
| Inlet Body Size | 1/4", 3/8", 1/2", 3/4", 1", NPT/BSP |
| Bodies | C.S./Brass/Alloy Steel |
| Diaphragms Seats | Neoprene/Buna-N/302 ST. ST. Standard Metal |
| Trims | S.S./Brass/Alloy Steel |
Pressure Reducing Valve : The model PRV-123 is Nutech's primary general service, self contained, back pressure, reducing, regulator. Unit handles back pressures 0 to 400 psig (27.6 barg) in multiple spring ranges. Model PR-123 is utilized for the majority of industrial back pressure reducing applications.
| Media | All gases compatible with materials of construction for other media consult with factory |
| Rated Inlet Pressure | 6000 PSIG (Stainless steel body) |
| Outlet Pressure Range | 4-50, 4-150, 4-250, 4-500 PSIG |
| Proof Pressure | 8500 PSIG |
| Burst Pressure | 10000 PSIG |
| Materials | Body - Stainless Steel |
| Flow Capacity | Cv = .08 |
| Ambient operating and | -55 C To 75 C |
| fluid media temperature Port Size | 1/8", 1/4", 3/8", 1/2" NPTF/BSPF |
| Application | Air/Liquid/Gas |
| Inlet Size | 3/8", 1/2", 3/4" |
| Inlet Pressure - Max | 10000 PSI |
| Outlet Pressure - Max | 9000 PSI |
| Orifice Size | 0.5 to 1.0 |
| Temperature Range | -55 to 90l |
| Material | C.S./Alloy Steel/NAB |
These controllers represents a new height in the achievements of continuous design and development improvements by Nu-Tech Valves. Series-1000/01 are compact light eshy to adjust, offered in three basic grades of material for bodies and spring housings.
Series-1000/01 controllers are designed for use with all gases and liquids compatible with the materials employed while we can offer faster delivery in standard materials. Special materials for aggressive conditions can be supplied on request.
| Fluid Material | All gases corrosive or non-corrosive or those requiring high purity regulations complete with materials or construction. |
| Max. Rated Inlet Pressure | 6000 PSIG |
| Outlet Pressure Range | 1-25, 2-50, 10-200, 20-300, 100-600 |
| Flow Capacity | 0.06 |
| Inlet Outlet Port Size | 1/4", 3/8", 1/2" NPT/BSP |
High purity gas handling regulations of corrosive and specially semiconductor manufacturing epitaxial reactors diffusion furnaces research lab.
| Body Material | C.S./S.S. |
| Op. Temp. Range | -20 F to +150 F |
| Inlet Pressure Range | 5 to 1000 PSIG |
| Outlet Pressure Range | 3 to 200 PSIG |
467 regulators are designed for outdoor and indoor installation.
Technical Specification
| Valve Size | 2", 3", 4" |
| Rating | 150# to 300# |
| Temperature | 180 C Maximum |
| Inlet Pressure Max. | 300 PSIG |
| Valve Function Self Regulating Accessories | Pressure reducing, up stream-down stream control control, emergency on/off, back pressure control High pressure regulator pneumatically operated blind pressure controller |
| Body | Globe style with model 523 |
| Material | Body - C.S. & Alloy Steel Trim - C.S. & Alloy Steel |
| Size | 4x6/6x8/8x10/10x12 |
| Body | C.I./C.S./CF8/CF8M/Alloy Steel |
| Trim | C.S./Alloy Steel |
| Minimum Pressure | 1 PSI |
| Maximum Pressure | 20 PSI |
| Temperature | 70 C |
High purity gas handling regulations of corrosive and specially semiconductor manufacturing epitaxial reactors diffusion furnaces research lab.
NU-TECHsteel ball valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum Institute standard API608 &API 6D. British standard Bs5351 and generally, Conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a complete range of body/bonnet materials and trims.
Extended lever for easy operation. also available with gearing motor actuators, pneumatic or hydraulic actuators for more difficult services.
Split or 3-piece, split body & bonnet for 12" & small disassembles easily for repair component.
Full bore or reduced bore. full-bore design provides exceptional flow control.
A choice of flanged, Rh flanged or butt welding end for piping flexibility.
Standard body/bonnet materials include nine grades of carbon, low alloy & stainless steels. For special applications they can be supplied in other grades of alloy & stainless steel. Threre's a full range of trim materials to match any service optional packing & gasket materials are available for a full range of service conditions.
Std packing multiple V-teflon packing. combined with live loading, maintains packing compression under high-cycle and severe service applications. Graphite packing is used for high-temperature situation.
Blow-out proof stem A pressure-safe stem shoulder design that protects against failure under excess pressure.
Fire safe designed to API607 or BS 6755 to grant their operation suitability in case of fire. Secondary metal-to- metal seal acts as backup if primary seal is destroyed by fire. Valves ordered for compliance with API607 will be provided with graphite packing and gaskets.
Appiicarit Standards
Design Descriptions
Materials Of Parts
| S. No. | Part Name | Carbon Steel | Stainless Steel |
| 1 | Body | A216-WCb | A351-CRIM |
| 2 | Bonnet | A216-WCB | A351-CF8M |
| 3 | Ball | A182-F304 | Al 82-F316 |
| 4 | Steam | A276-304 | A276-316 |
| 5 | Seat Ring | R.PTFE | |
| 6 | Bonnet Gasket | Graphite+304 | PTFE |
| 7 | Bonnet Stud | A193-B7 | Al 93-B8 |
| 8 | Bonnet Stud Nut | A194-2H | A194-8 |
| 9 | Packing | PTFE | |
| 10 | Gland Flange | A216-WCB | A351-CF8M |
| 11 | Gland Bolt | A193-B7 | A193-B8 |
| 12 | Stop Plate | Carbon Steel | Carbon steel +Zn |
| 13 | Handle | Carbon steel |
| No. | Part Name | Carbon Steel | Stainless Steel |
| 1 | Body | A216-WCb | A351-CF8M |
| 2 | Bonnet | A216-WCB | A351 -CF8M |
| 3 | Ball | A182-F304 | A182-F316 |
| 4 | Steam | A276-304 | A276-316 |
| 5 | Seat Ring | R.PTFE | |
| 6 | Bonnet Gasket | Graphite+304 | PTFE |
| 7 | Bonnet Stud | A193-B7 | A193-B8 |
| 8 | Bonnet Stud Nut | A194-2H | A194-8 |
| 9 | Packing | PTFE | |
| 10 | Gland Flange | A216-WCB | A351-CFBM |
| 11 | Gland Bolt | A193-B7 | A193-B8 |
| 12 | Stop Plate | Carbon Steel | Carbon steel +Zn |
| 13 | Handle | Carbon steel |
| NPS | 1/2 | 3/4 | 1 | 11/2 | 2 | 21/2 | 3 | 4 | 6 | 8 | 10 | in |
| DN | 15 | 20 | 25 | 40 | 50 | 65 | 80 | 100 | 150 | 200 | 250 | mm |
| L | 5.5 | 6 | 6.5 | 7.5 | 8.5 | 9.5 | 11.12 | 12 | 15.88 | 19.75 | 22.38 | in |
| (RF) | 140 | 152 | 190 | 190 | 216 | 241 | 283 | 305 | 403 | 502 | 568 | mm |
| L1 | 5.5 | 6 | 6.5 | 7.5 | 8.5 | 9.5 | 11.12 | 12 | 18 | 20.5 | 22 | in |
| (BW) | 140 | 152 | 165 | 190 | 216 | 241 | 283 | 305 | 457 | 521 | 559 | mm |
| H | 2.12 | 2.12 | 2.75 | 3.5 | 4.12 | 6.12 | 7.25 | 8 | 10 | 11 | 13.5 | in |
| 55 | 55 | 70 | 90 | 105 | 153 | 187 | 206 | 255 | 280 | 345 | mm | |
| W | 5 | 5 | 6 | 8 | 14 | 16 | 20 | 20 | 24 | 32 | 32 | in |
| 130 | 130 | 160 | 200 | 350 | 400 | 500 | 500 | 600 | 800 | 800 | mm | |
| Wt (kg.) | 2.3 | 3 | 5.5 | 10.5 | 14.5 | 23.5 | 30 | 55 | 118 | 200 | 250 | BW |
| 1.8 | 2 | 3.2 | 5.5 | 8.7 | 15 | 18 | 36 | 85 | 152 | 182 |
Design Descriptions
Applicable Standards
Materials Of Parts
| No. | Part Name | Carbon Steel | Stainless Steel |
| 1 | Body | A216-WCb | A351-CF8M |
| 2 | Bonnet | A216-WCB | A351-CF8M |
| 3 | Ball | A182-F304 | A182-F316 |
| 4 | Stem | A276-304 | A276-316 |
| 5 | Seat | A105+ENP | Al 82-F316 |
| 6 | Seat Insert | Glass Filled PTFE | |
| 7 | Seat Spring | A313-304 | Inconel X-750 |
| 8 | Seat 0-Ring | NPR | Vrton |
| 9 | Stem 0-Ring | NBR | Vrton |
| 10 | Bonnet Gasket | Graphtte+304 | Graphite+316 |
| 11 | Bonnet 0-Ring | NBR | Vrton |
| 12 | Antistatic Spring | A313-304 | A313-316 |
| 13 | Lower Cover | A216-WCB | A182-F316 |
| 14 | Bonnet Stud | A193-B7 | A193-B8 |
| 15 | Bonnet Stud Nut | A194-211 | A194-8 |
| 16 | Trunnion | A276-304 | A276-316 |
| 17 | Trunnion Bearing | 304+ PTFE | 316+ PTFE |
| 18 | Gland Range | A216-WCB | A351-CF8M |
| 19 | Gland Mt | A193-B7 | A193-B8 |
| 20 | Stop Plate | Carbon Steel | Carbon Steel +Zn |
| 21 | Handle | Carbon Steel |
Dimensional Datas Of Ansi Class 150 LB
| NPS | 2 | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | 26 | 28 | 30 | 32 | 36 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 650 | 700 | 750 | 800 | 900 | mm |
| L | 7 | 7.5 | 8 | 9.00 | 15.5 | 18 | 21 | 24 | 27.00 | 30.00 | 34.00 | 36.00 | 42.00 | 45 | 49 | 51 | 54 | 60 | in |
| (RF) | 178 | 190 | 203 | 229 | 394 | 457 | 533 | 610 | 686 | 762 | 864 | 914 | 1067 | 1143 | 1245 | 1295 | 1372 | 1524 | mm |
| L1 | 8.5 | 9.5 | 11.12 | 12.00 | 18 | 20.5 | 22 | 25 | 30.00 | 33.00 | 36.00 | 39.00 | 45.00 | 49 | 53 | 55 | 60 | 68 | in |
| (BW) | 216 | 241 | 283 | 305 | 457 | 521 | 559 | 635 | 762 | 838 | 914 | 991 | 1143 | 1245 | 1346 | 1397 | 1524 | 1727 | mm |
| H | 7 | 7.5 | 8.25 | 9.25 | 20.88 | 24.62 | 25.62 | 30.75 | 31.00 | 36.25 | 38.25 | 43.38 | 45.25 | 50.75 | 55.12 | 64.12 | 70.88 | 80.75 | in |
| 177 | 190 | 210 | 235 | 530 | 625 | 650 | 780 | 790 | 920 | 970 | 1100 | 1150 | 1290 | 1400 | 1630 | 1840 | 2050 | mm | |
| W | 14 | 16 | 20 | 20 | 24 | 24 | 24 | 24 | 32 | 32 | 32 | 32 | 32 | 32 | 32 | 32 | 32 | 32 | in |
| 350 | 400 | 500 | 500 | 600 | 600 | 600 | 600 | 800 | 800 | 800 | 800 | 800 | 800 | 800 | 800 | BOO | 800 | mm | |
| Wt(kg.) | 15 | 19 | 27 | 38 | 81 | 140 | 160 | 205 | 260 | 390 | 510 | 750 | 1200 | 1400 | 1860 | 2100 | 2530 | 2970 | BW |
| 13.5 | 15.5 | 24.5 | 32.5 | 76 | 132 | 147 | 182 | 241 | 370 | 495 | 726 | 1125 | 1250 | 1640 | 1930 | 2390 | 2760 |
| NPS | 2 | 2 | 3 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | 26 | 28 | 30 | 32 | 36 | in |
| DN | 50 | 65 | 80 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 650 | 700 | 750 | 800 | 900 | mm |
| L | 8.5 | 9.5 | 11.12 12.00 | 15.88 | 19.75 | 22.38 | 25.5 | 30.00 | 33.00 | 36.00 | 39.00 | 45.00 | 49 | 5300 | 55 | 60 | in | |
| (RF) | 216 | 241 | 283 305 | 403 | 502 | 568 | 648 | 762 | 838 | 914 | 991 | 1143 | 1245 | 1346 | 1397 | 1524 | mm | |
| L1 | 8.5 | 9.5 | 11.12 12.00 | 18 | 20.5 | 22 | 25 | 30.00 | 33.00 | 36.00 | 39.00 | 45.00 | 49 | 53 | 55 | 60 | in | |
| (BW) | 216 | 241 | 283 305 | 403 | 521 | 559 | 635 | 762 | 838 | 914 | 991 | 1143 | 1245 | 1346 | 1397 | 1524 | mm | |
| H | 7 | 7.5 | 8.25 9.25 | 20.88 | 24.62 | 25.62 | 30.75 | 31.00 | 36.25 | 38.25 | 43.38 | 45.25 | 50.75 | 55.12 | 64.12 | 70.88 | in | |
| 177 | 190 | 210 235 | 530 | 625 | 650 | 780 | 790 | 920 | 970 | 1100 | 1150 | 1290 | 1400 | 1630 | 1840 | mm | ||
| W | 14 | 16 | 20 20 | 24 | 24 | 24 | 24 | 32 | 32 | 32 | 32 | 32 | 32 | 32 | 32 | 32 | in | |
| 350 | 400 | 500 500 | 600 | 600 | 600 | 600 | 800 | 800 | 800 | 800 | 800 | 800 | 800 | 800 | 800 | mm | ||
| Wt(kg.) | 19 | 24 | 34 48 | 101 | 175 | 200 | 225 | 325 | 485 | 635 | 935 | 1500 | 1750 | 2450 | 2225 | 2870 | BW | |
| 14 | 16 | 25 34 | 82 | 145 | 155 | 185 | 238 | 375 | 516 | 782 | 1280 | 1375 | 2180 | 1825 | 2260 |
| No. | Part Name | Carbon Steel | Stainless Steel |
| 1 | Body | A216-WCb | A351-CR8M |
| 2 | Bonnet | A216-WCB | A351-CR8M |
| 3 | Ball | A1 82-F304 | A182-F316 |
| 4 | Stem | A276-304 | A276-316 |
| 5 | Seat | A105+ENP | A182-F316 |
| 6 | Seat Insert | Glass Filled PTFE | |
| 7 | Seat Spring | A313-304 | Inconel X-750 |
| 8 | Seat 0-Ring | N BR | Vrton |
| 9 | Stem 0-Ring | N BR | Vrton |
| 10 | Bonnet Gasket | Graphite+304 | Graphtte+316 |
| 11 | Bonnet 0-Ring | NBR | Vrton |
| 12 | Antistatic Spring A313-304 | A313-304 | A313-316 |
| 13 | Lower Cover | A216-WCB | A182-F316 |
| 14 | Bonnet Stud | A193-B7 | A193-B8 |
| 15 | Bonnet Stud Nut A194-2H | A194-2H | A194-8 |
| 16 | Trunnion | A276-304 | A276-316 |
| 17 | Trunnion Bearing 304+ PTFE | 304+ PTFE | 316+PTFE |
| 18 | Gland Flange | A216-WCB | A351-CF8M |
| 19 | Gland Bott | A193-B7 | A193-B8 |
| 20 | Stop Plate | Carbon Steel | Carbon Steel+Zn |
| 21 | Handla | Carbon Steel |
| N PS | 2 | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | 26 | 28 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 650 | 700 | min |
| 11.5 | 13 | 14 | 17 | 22 | 26 | 31 | 33 | 35 | 39 | 43 | 47 | 55 | 57 | 61 | in | |
| (RF/BW) | 292 | 330 | 356 | 432 | 559 | 660 | 787 | 838 | 889 | 991 | 1092 | 1194 | 1397 | 1448 | 1549 | mm |
| L2 | 11.62 | 13.12 | 14.12 | 17.12 | 22.12 | 26.12 | 31.12 | 33.12 | 30 | 39.12 | 43.12 | 47.25 | 55.38 | 57.5 | 61.5 | in |
| (RTJ) | 295 | 333 | 359 | 435 | 562 | 664 | 791 | 841 | 762 | 994 | 1095 | 1200 | 1407 | 1461 | 1562 | mm |
| 7.12 | 7.62 | 8.5 | 9.5 | 21.25 | 25 | 26.12 | 31.12 | 31 | 36.38 | 38.75 | 44.5 | 46.62 | 52.5 | 57 | in | |
| 180 | 193 | 215 | 241 | 540 | 635 | 665 | 790 | 790 | 925 | 985 | 1130 | 1185 | 1335 | 1450 | mm | |
| W | 14 | 16 | 20 | 20 | 24 | 24 | 24 | 24 | 32 | 32 | 32 | 32 | 32 | 32 | 32 | in |
| 350 | 400 | 500 | 500 | 600 | 600 | 600 | 600 | 800 | 800 | 800 | 800 | 800 | 800 | 800 | mm | |
| Wt(kg .) | 26 | 35 | 58 | 81 | 142 | 287 | 540 | 780 | 1000 | 1300 | 1700 | 2100 | 3400 | 3800 | 4500 | BW |
| 19 | 25 | 42 | 51 | 85 | 200 | 395 | 610 | 805 | 1010 | 1350 | 1656 | 2775 | 3125 | 3790 |
| NPS | 2 | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | mm |
| 14.5 | 16.5 | 15 | 18 | 24 | 29 | 33 | 38 | 40.5 | 44.5 | 48 | 52 | 61 | in | |
| (RF/BW) | 368 | 419 | 381 | 457 | 610 | 737 | 838 | 965 | 1029 | 1130 | 1219 | 1321 | 1549 | mm |
| L2 | 1462 | 16.62 | 15.12 | 18.12 | 24.12 | 29.12 | 33.12 | 38.12 | 40.88 | 11.88 | 48.5 | 52.5 | 61.75 | in |
| (RTJ) | 371 | 422 | 384 | 460 | 613 | 740 | 841 | 968 | 1038 | 1140 | 1232 | 1334 | 1568 | mm |
| 8.62 | 9.25 | 10.25 | 15.38 | 25.75 | 30.25 | 31.75 | 38 | 38.5 | 45 | 47 | 53.5 | 56 | in | |
| 219 | 235 | 260 | 390 | 655 | 770 | 805 | 965 | 980 | 1145 | 1195 | 1360 | 1425 | mm | |
| 20 | 20 | 20 | 24 | 24 | 24 | 24 | 32 | 32 | 32 | 32 | 32 | 32 | in | |
| 500 | 500 | 500 | 600 | 600 | 600 | 600 | 800 | 800 | 800 | 800 | 800 | 800 | mm | |
| Wt(kg.) | 31 | 43 | 68 | 98 | 171 | 345 | 650 | 940 | 1205 | 1565 | 2050 | 2535 | 3950 | BW |
| 23 | 31 | 51 | 61 | 102 | 240 | 480 | 735 | 965 | 1215 | 1625 | 1995 | 3335 |
| No. | Part Name | Carbon Steel | Stainless Steel |
| 1 | Body | A216-WCb | A351-CF8M |
| 2 | Bonnet | A216-WCB | A351-CF8M |
| 3 | Ball | A182-F304 | A182-F316 |
| 4 | Stem | A276-304 | A276-316 |
| 5 | Seat | A105+ ENP | A182-F316 |
| 6 | Seat Insert | Glass Filled PTFE | |
| 7 | Seat Spring | A, 313-304 | Inconel X-750 |
| 8 | Seat 0-Ring | NPR | Viton |
| 9 | Stem 0-Ring | NBR | Viton |
| 10 | Bonnet Gasket | Graphite+304 | Graphite+316 |
| 11 | Bonnet 0-Ring | NBR | Viton |
| 12 | Antistatic Spring | A313-304 | A313-316 |
| 13 | Lower Cover | A216-WCB | A182-F316 |
| 14 | Bonnet Stud | A193-B7 | A193-B8 |
| 15 | Bonnet Stud Nut | A194-2H | A194-8 |
| 16 | Trunnion | A276-304 | A276-316 |
| 17 | Trunnion Bearing | 304+PTFE | 316+FTFE |
| 18 | Gland Flange | A216-WCB | A351-CF8M |
| 19 | Gland Bolt | A193-B7 | A193-B8 |
| 20 | Stop Plate | Carbon Steel | Carton Steel +Zn |
| 21 | Handle | Carbon Steel |
| NPS | 2 | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | mm |
| L/L1 | 14.5 | 16.5 | 18.5 | 21.5 | 27.75 | 32.75 | 39 | 44.5 | 49.5 | 54.5 | in |
| (R F/BW) | 368 | 419 | 470 | 546 | 705 | 832 | 991 | 1130 | 1257 | 1384 | mm |
| L2 | 14.62 | 16.62 | 18.62 | 18.62 | 28 | 33.12 | 39.38 | 45.12 | 20.25 | 44.38 | in |
| (RTJ) | 371 | 422 | 473 | 473 | 711 | 841 | 1000 | 1146 | 1276 | 1407 | mm |
| H | 11.25 | 12 | 13.25 | 13.25 | 33.5 | 39.38 | 41.12 | 49.38 | 50_00 | 58.5 | in |
| 285 | 305 | 383 | 338 | 852 | 1000 | 1045 | 1255 | 1270 | 1485 | mm | |
| W | 20 | 20 | 24 | 24 | 24 | 32 | 32 | 32 | 32 | 32 | in |
| 500 | 500 | 600 | 600 | 600 | 800 | 800 | 800 | 800 | 800 | mm | |
| Wt(kg.) | 49 | 67 | 106 | 153 | 268 | 540 | 1020 | 1475 | 1885 | 2455 | RF/RTJ |
| 33 | 44 | 73 | 87 | 145 | 345 | 685 | 1050 | 1385 | 1735 | BW |
| NPS | 2 | 21/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | mm |
| L/L1 | 17.75 | 20 | 22.75 | 26.5 | 36 | 40.25 | 50 | 56 | in | ||
| (R F/BW) | 451 | 508 | 578 | 673 | 914 | 1022 | 1270 | 1422 | mm | ||
| L2 | 17.88 | 21.25 | 23 | 26.88 | 36.5 | 40.88 | 50.88 | 56.88 | in | ||
| (RTJ) | 454 | 540 | 584 | 683 | 927 | 1038 | 1292 | 1445 | mm | ||
| H | 12 | 12.88 | 14.25 | 21.25 | 35.88 | 42.12 | 44 | 53 | in | ||
| 304 | 327 | 362 | 540 | 911 | 1070 | 1120 | 1345 | mm | |||
| W | 20 | 24 | 24 | 24 | 32 | 32 | 32 | 32 | in | ||
| 500 | 600 | 600 | 600 | 800 | 800 | 800 | 800 | mm | |||
| Wt(kg.) | 55 | 76 | 120 | 173 | 302 | 612 | 1150 | 1665 | RF/FITJ | ||
| 41 | 55 | 91 | 110 | 182 | 430 | 855 | 1315 |
| S. No. | Part Name | Carbon Steel | ASTM Material 1/1/4cr-1/2 mo |
| 1 | Body | A216-WCb | A217-WC6 |
| 2 | Bonnet | A216-WCB | A217-W6 |
| 3 | Wedge | A216-WCB+CR13 | A2174NC6+HF |
| 4 | Stem | A182-F6a | CR-MO-V |
| 5 | Seat ring | A105+CR13 | A182-F1+HF |
| 6 | Stem Backseat | A276-420 | A276-304 |
| 7 | Bonnet Gasket | Spiral wound (Grapats+304) | |
| a | Bonnet Stud | A193-67 | A193-616 |
| 9 | Bonnet Stud Nut | A194-2H | A194-7 |
| 10 | Packing | Graphite | |
| 11 | Gland | A276-420 | A276-304 |
| 12 | Gland Flange | A216-WCB | A217-WG6 |
| 13 | Eye Bolt Pin | Carbon Steel | A276-420 |
| 14 | Eye Bolt | Carbon Steel | A193-B7 |
| 15 | Eye Bolt Nut | Carbon Steel | A194-2H |
| 16 | Grease Frtting | Brass + Steel | |
| 17 | Yoke Sleeve | Aluminium - Bronze | |
| 18 | Yoke Sleeve Jam Nut | Carbon Steel | |
| 19 | Hand Wheel | Malleable Iron | |
| 20 | Hand Wheel Nut | Carbon Steel | |
| NPS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | 26 | 28 | 30 | 32 | 36 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 650 | 700 | 750 | 800 | 900 | mm |
| L | 7 | 7.5 | 8 | 9 | 10.5 | 11.5 | 13 | 14 | 15 | 16 | 17 | 18 | 20 | 22 | 24 | 24 | 28 | 28 | in |
| (RF) | 178 | 191 | 203 | 229 | 267 | 292 | 330 | 356 | 381 | 406 | 432 | 457 | 508 | 559 | 610 | 610 | 711 | 711 | mm |
| L1 | 85 | 9.5 | 11.12 | 12 | 15.88 | 16.5 | 18 | 19.75 | 22.5 | 24 | 26 | 28 | 32 | 34 | 36 | 36 | 38 | 40 | in |
| (BW) | 216 | 241 | 283 | 305 | 403 | 419 | 457 | 502 | 572 | 610 | 660 | 711 | 813 | 864 | 914 | 914 | 965 | 1016 | mm |
| H | 15.25 | 17 | 18.88 | 23 | 30.5 | 37.62 | 54.5 | 53.12 | 59.38 | 67 | 74.5 | 83.5 | 98.25 | 110.5 | 116.5 | 124 | 129 | 146.5 | in |
| (Open) | 386 | 434 | 480 | 584 | 765 | 956 | 1149 | 1350 | 1508 | 1703 | 1892 | 2119 | 2500 | 2806 | 2960 | 3150 | 3280 | 3720 | mm |
| Do | 8 | 8 | 10 | 12 | 12 | 14 | 16 | 15 | 20 | 22 | 24 | 26 | 29 | 29 | 32 | 32 | 38 | 40 | in |
| 200 | 200 | 250 | 300 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 640 | 700 | 720 | 800 | 800 | 950 | 1000 | mm | |
| Wt(kg.) | 18 | 18 | 32 | 50 | 77 | 121 | 178 | 265 | 463 | 463 | 621 | 792 | 1521 | 1521 | 1838 | 2261 | 2490 | 3310 | RF |
| 15 | 15 | 26 | 41 | 69 | 108 | 156 | 248 | 424 | 424 | 587 | 752 | 1570 | 1570 | 1900 | 3310 | 2540 | 3380 | BW |
| NPS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | 26 | 28 | 30 | 32 | 36 | in |
| ON | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 650 | 700 | 750 | 800 | 900 | mm |
| L/L1 | 8.5 | 9.5 | 11.12 | 12 | 15.88 | 16.5 | 18 | 19.75 | 30 | 33 | 36 | 39 | 45 | 49 | 53 | 55 | 60 | 68 | in |
| (RF/BW) | 216 | 241 | 283 | 305 | 403 | 419 | 457 | 602 | 762 | 838 | 914 | 991 | 1143 | 1245 | 1346 | 1397 | 1524 | 1727 | mm |
| L2 | 9.12 | 10.12 | 11.75 | 12.62 | 16.5 | 17.12 | 18.62 | 20.39 | 30.62 | 33.62 | 36.62 | 39.75 | 45.88 | 50 | 54 | 56 | 61.12 | 69.12 | in |
| (RTJ) | 232 | 257 | 298 | 321 | 419 | 435 | 473 | 518 | 778 | 854 | 930 | 1010 | 1165 | 1270 | 1372 | 1422 | 1553 | 1756 | mm |
| H | 16.12 | 17.88 | 20 | 24 | 31.75 | 39.38 | 47.62 | 55.75 | 62.25 | 67.88 | 77.12 | 86.38 | 102 | 117 | 122 | 126 | 130 | 152 | in |
| (Open) | 410 | 453 | 509 | 612 | 805 | 1000 | 1210 | 1415 | 1580 | 1725 | 1960 | 2195 | 2590 | 2975 | 3100 | 3200 | 3300 | 3860 | mm |
| Do | 8 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 25 | 22 | 24 | 26 | 29 | 29 | 32 | 32 | 38 | 40 | in |
| 200 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 550 | 600 | 640 | 720 | 720 | 800 | 800 | 950 | 1000 | mm | |
| Mk) | 23 | 35 | 50 | 71 | 144 | 209 | 322 | 482 | 683 | 950 | 1145 | 1635 | 2660 | 3090 | 3310 | 3595 | 3720 | 3985 | RF |
| 17 | 26 | 39 | 53 | 113 | 164 | 256 | 390 | 565 | 805 | 965 | 1410 | 2305 | 2540 | 2725 | 3055 | 3360 | 3630 | BW |
| S. No. | Part Name | Carbon Steel | ASTM Material 1/1/4cr-1/2 mo |
| 1 | Body | A216-WCb | A217-WC6 |
| 2 | Bonnet | A216-WCB | A21 7-W6 |
| 3 | Wedge | A216-WCB+CR13 | A217-WC6+HF |
| 4 | Stem | A182-F6a | CR-MO-V |
| 5 | Seat ring | Al 05+CR13 | A182-F1+HF |
| 6 | Stem Backseat | A276-420 | A276-304 |
| 7 | Bonnet Gasket | Spiral wound (Graphtle+304) | |
| 8 | Bonnet Stud | A193-87 | A193-B16 |
| 9 | Bonnet Stud Nut | A194-2H | A194-7 |
| 10 | Packing | Graphite | |
| 11 | Gland | A276-420 | A276-304 |
| 12 | Gland Flange | A216-WCB | A217-WC6 |
| 13 | Eye Bolt Pin | Carbon Steel | A276-420 |
| 14 | Eye BoR | Carbon Steel | A193-87 |
| 15 | Eye Boll Nut | Carbon Steel | A194-2H |
| 16 | Grease Fitting | Brass + Steel | |
| 17 | Yoke Sleeve | Aluminium - Bronze | |
| 18 | Yoke Sleeve Jam Nut | Carbon Steel | |
| 19 | Hand Wheel | Malleable Iron | |
| 20 | Hand Wheel Nut | Carbon Steel | |
| NPS | 2 | 2/1/2002 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | 26 | 28 | 30 | 32 | 36 | in |
| ON | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 650 | 700 | 750 | 800 | 900 | MM |
| L/L1 | 11.5 | 13 | 14 | 17 | 22 | 26 | 31 | 33 | 35 | 39 | 43 | 47 | 55 | 57 | 61 | 65 | 70 | 82 | in |
| (RF/BW) | 292 | 330 | 359 | 432 | 559 | 660 | 787 | 838 | 889 | 991 | 1092 | 1194 | 1397 | 14.48 | 1549 | 1651 | 1778 | 2083 | mm |
| L2 | 11.62 | 13.12 | 14.12 | 17.12 | 22.12 | 26.12 | 31.12 | 33.12 | 35.12 | 39.12 | 43.12 | 47.25 | 55.38 | 57.5 | 61.5 | 65.5 | 70.62 | 82.62 | in |
| (RTJ) | 295 | 333 | 359 | 435 | 562 | 664 | 791 | 841 | 892 | 994 | 1095 | 1200 | 1407 | 1461 | 1562 | 1644 | 1794 | 2099 | mm |
| H | 16.5 | 18.75 | 20.38 | 25.5 | 33 | 40.38 | 48.38 | 57 | 62 | 70.62 | 76 | 87 | 101.5 | 105 | 109.5 | 140 | 124 | 140 | in |
| (Open) | 418 | 476 | 518 | 646 | 840 | 1025 | 12.3 | 1450 | 1575 | 1795 | 1930 | 2210 | 2580 | 2665 | 2780 | 2895 | 3150 | 3560 | rnal |
| Do | 8 | 10 | 10 | 12 | 18 | 20 | 24 | 24 | 24 | 24 | 26 | 26 | 29 | 29 | 32 | 32 | 38 | 40 | in |
| 200 | 250 | 250 | 300 | 450 | 500 | 600 | 600 | 600 | 600 | 640 | 640 | 720 | 720 | 800 | 800 | 950 | 1000 | mm | |
| Wt(kg.) | 36 | 52 | 67 | 112 | 170 | 393 | 610 | 890 | 1245 | 1530 | 1945 | 2450 | 2995 | 3475 | 3725 | 4045 | 4185 | 4480 | RF |
| 29 | 42 | 53 | 83 | 125 | 310 | 472 | 730 | 1055 | 1240 | 1625 | 2030 | 2590 | 2855 | 3065 | 3440 | 3780 | 4085 | BW |
| N PS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | mm |
| L/L1 | 14.5 | 16.5 | 15 | 18 | 24 | 29 | 33 | 38 | 40.5 | 44.5 | 48 | 52 | 61 | in |
| (RF/BW) | 368 | 419 | 381 | 457 | 610 | 737 | 838 | 737 | 1029 | 1130 | 1219 | 1321 | 1549 | mm |
| L2 | 14.62 | 16.62 | 15.12 | 18.12 | 24.12 | 29.12 | 33.12 | 38.12 | 40.88 | 44.88 | 48.5 | 52.5 | 61.75 | in |
| (RTJ) | 371 | 422 | 384 | 460 | 613 | 740 | 841 | 968 | 1038 | 1140 | 1232 | 1334 | 1568 | mm |
| H | 19.62 | 21.5 | 22.5 | 26.62 | 35.5 | 4.5 | 53 | 60 | 74.88 | 81 | 87 | 101 | 104 | in |
| (Open) | 498 | 547 | 573 | 678 | 900 | 1103 | 1345 | 15.25 | 1900 | 2055 | 2215 | 2565 | 264 | mm |
| Do | 10 | 10 | 12 | 18 | 20 | 24 | 26 | 29 | 32 | 32 | 38 | 38 | 40 | in |
| 250 | 250 | 300 | 450 | 500 | 600 | 640 | 720 | 800 | 800 | 950 | 950 | 100 | mm | |
| Wt(kg.) | 74 | 131 | 101 | 172 | 335 | 640 | 1100 | 1600 | 2250 | 2850 | 3060 | 3935 | 49 | RF |
| 54 | 105 | 78 | 135 | 260 | 515 | 920 | 1380 | 2010 | 2565 | 3485 | 3250 | 4065 | BW |
| S. No. | Part Name | Carbon Steel | ASTM Material 1/1/4cr-1/2 mo |
| 1 | Body | A216-WCB | A217-W06 |
| 2 | Yoke | A216-WCB | A217-WC6 |
| 3 | Wedge | A216-WCB+HF A217-WC6+HF | |
| 4 | Stem | A182-F6a | CR-MO-V |
| 5 | Seat ring | A105+HF | A182-F11+HF |
| 6 | Bonnet | A105 | A182-F11 |
| 7 | Bonnet Gasket | Steel Ring | 3045S ring |
| 8 | Adapter ring | Carbon Steel | A-276-420 |
| 9 | Retainer | Carbon Steel | A-276-420 |
| 10 | Yoke Cap | Carbon Steel | Alloy Steel |
| 11 | Bonnet Stud | A193-B7 | A193-B16 |
| 12 | Bonnet Stud Nut | A194-2H | A194-7 |
| 13 | Packing | Graphite | |
| 14 | Gland | A276-420 | A276-304 |
| 15 | Gland Flange | A216-WCB | A217-WC6 |
| 16 | Eye Bolt Pin | Carbon Steel | 4276-420 |
| 17 | Eye Belt | Carbon Steel | A193-B7 |
| 18 | Eye Bolt Net | Carbon Steel | A194-2H |
| 19 | Grease Fitting | Brass + Steel | |
| 20 | Yoke Sleeve | Aluminium-Bronze | |
| 21 | Yoke Sleeve Jam Nut | Carbon Steel | |
| 22 | Hand Wheel | Malleable Iron | |
| 23 | Hand Wheel Nut | Carbon Steel | |
| NPS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | mm |
| L/L1 | 14.5 | 16.5 | 18.5 | 21.5 | 27.75 | 32.75 | 39 | 44.5 | 49.5 | 54.5 | 60.5 | 65.5 | 76.5 | in |
| (RF/BW) | 368 | 419 | 470 | 546 | 705 | 832 | 991 | 1130 | 1257 | 1384 | 1537 | 1664 | 19.43 | mm |
| L2 | 15.5 | 16.62 | 18.62 | 21.62 | 28 | 33.12 | 39.38 | 45.12 | 50.25 | 55.38 | 61.38 | 66.37 | 76.62 | in |
| (RTJ) | 371 | 422 | 473 | 549 | 711 | 841 | 1000 | 1146 | 1276 | 1407 | 1559 | 1686 | 1972 | mm |
| H | 24.25 | 26 | 30 | 34.12 | 39.5 | 45 | 54 | 61 | 74.88 | 80.5 | 93.75 | 101.5 | 114.75 | in |
| (Open) | 615 | 658 | 760 | 868 | 1005 | 1145 | 1370 | 1 550 | 1900 | 2050 | 2380 | 2580 | 2915 | mm |
| Do | 10 | 12 | 18 | 20 | 24 | 18 | 18 | 24 | 24 | 24 | 24 | 24 | 24 | in |
| Wt(kg.) | 250 | 300 | 450 | 500 | 600 | 460 | 460 | 600 | 600 | 600 | 600 | 600 | 600 | mm |
| 116 | 166 | 209 | 296 | 510 | 920 | 1910 | 3145 | 4100 | 6200 | 8965 | 13100 | 15860 | RF | |
| 105 | 150 | 188 | 265 | 420 | 760 | 1640 | 2755 | 3200 | 5300 | 8070 | 11790 | 14275 | BW |
| NPS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | mm |
| L/L1 | 17.5 | 20 | 22.75 | 26.5 | 36 | 40.25 | 50 | 56 | in | |||||
| (RF/BW) | 451 | 508 | 578 | 673 | 914 | 1022 | 1270 | 1422 | mm | |||||
| L2 | 17.88 | 20.5 | 23 | 26.88 | 36.5 | 40.88 | 50.88 | 56.88 | in | |||||
| (RTJ) | 454 | 514 584 | 584 | 683 | 927 | 1038 | 1292 | 1445 | mm | |||||
| H | 24.88 | 29 | 35 | 41.5 | 57 | 63.37 | 81.75 | 89.75 | in | |||||
| (Open) | 631 | 736 | 890 | 1055 | 1450 | 1610 | 2075 | 2280 | mm | |||||
| Do | 12 | 18 | 20 | 20 | 24 | 24 | 24 | 24 | in | |||||
| Wt(kg.) | 300 | 450 | 500 | 500 | 600 | 600 | 600 | 600 | mm | |||||
| 155 | 210 | 310 | 580 | 1 600 | 2450 | 4570 | 7150 | RF | ||||||
| 124 | 160 | 245 | 460 | 1310 | 2010 | 3800 | 6000 | BW |
| No. | Part Name | Carbon Steel | ASTM Material 1/1/4cr-1/2 mo |
| 1 | Body | A216-WCB | A217-W06 |
| 2 | Pres. Seal Bonner | A216-WCB | A217-WC6 |
| 3 | Disc | Al 05-HF | A182-Fl1+HF |
| 4 | Hinge | A2113-WCB | A217-W6 |
| 5 | Seat Ring | Al 05-HF | A182-F11+HF |
| 6 | Hinge Pin | Steel Ring | A276-304 |
| 7 | Bonnet Gasket | A276-420 | 30485 Ring |
| 8 | Adapter Ring | Carbon Steel | A276-420 |
| 9 | Retainer | Carbon Steel | A276-420 |
| 10 | Cover | Carbon Steel | Alloy Steel |
| 11 | Bonnet Stud | A193-B7 | A193-B7 |
| 12 | A194-2H | A194-2H | A194-2H |
| 13 | Eye Bolt | Carbon Steel |
| NPS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | mm |
| L/L1 | 14.5 | 16.5 | 18.5 | 21.5 | 27.15 | 32.75 | 39 | 44.5 | 49.5 | 54.5 | in |
| (RF/BW) | 368 | 419 | 470 | 546 | 705 | 832 | 991 | 1130 | 1257 | 1384 | mm |
| L2 | 14.62 | 16.62 | 18.62 | 21.62 | 28 | 33.12 | 39.38 | 45.12 | 50.25 | 55.38 | in |
| (RTJ) | 371 | 422 | 473 | 549 | 711 | 841 | 1000 | 1146 | 1276 | 1407 | mm |
| H | 9.5 | 10 | 13 | 14.75 | 18.88 | 23.5 | 26 | 29.12 | 30.88 | 32.88 | in |
| 240 | 256 | 330 | 375 | 480 | 595 | 660 | 740 | 785 | 835 | mm | |
| Wt(kg.) | 40 | 63 | 70 | 115 | 250 | 470 | 740 | 1100 | 1410 | 1600 | RF/RTJ |
| 29 | 47 | 49 | 84 | 152 | 310 | 470 | 710 | 910 | 1100 | BW |
| NPS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | mm |
| L/L1 | 17.75 | 20 | 22.75 | 26.5 | 36 | 40.25 | 50 | 56 | in | ||
| (RF/BW) | 451 | 508 | 578 | 673 | 914 | 1022 | 1270 | 1422 | mm | ||
| L2 | 17.88 | 20.25 | 23 | 26.88 | 36.5 | 40.88 | 50.88 | 56.88 | in | ||
| (RTJ) | 454 | 514 | 584 | 683 | 927 | 1038 | 1292 | 1445 | mm | ||
| H | 17.75 | 13.25 | 13.75 | 15.12 | 19.5 | 24.62 | 28 | 35.62 | in | ||
| 275 | 335 | 350 | 385 | 495 | 625 | 712 | 905 | mm | |||
| Wt(kg.) | 50 | 76 | 85 | 165 | 460 | 900 | 1300 | 1800 | RF/RTJ | ||
| 35 | 55 | 68 | 115 | 225 | 580 | 860 | 1150 | BW |
Appiicarit Standards
Design Descriptions
Materials Of Parts
| No. | Part Name | Carbon Steel | ASTM Material 1/1/4cr-1/2 mo |
| 1 | Body | A216-WCB | A217-WC6 |
| 2 | Bonnet | A216-WCB | A217-WC6 |
| 3 | Disc | A105+CR13 | A217-F1+HF |
| 4 | Stem | Al 82-F6a | CR-MO-V |
| 5 | Seat Ring | A105+HF | A182-F11+HF |
| 6 | Stem Backseat | A276-420 | A276-304 |
| 7 | Bonnet Gasket | Steel Ring | 304SS ring |
| 8 | Bonnet Stud | A193-B7 | A193-B16 |
| 9 | Bonnet Stud Nut | A194-2H | A194-7 |
| 10 | Packing | Graphtte | |
| 11 | Gland | A276-420 | A276-304 |
| 12 | Gland Flange | A216-WCB | A217-W06 |
| 13 | Eye Bolt Pin | Carbon Steel | A276-420 |
| 14 | Eye Bolt | Carbon Steel | A193-B7 |
| 15 | Eye Bott Nut | Carbon Steel | A194-2H |
| 16 | Yoke Sleeve | Aluminum-Bronze | |
| 17 | Hand Wheel | Malleable Iron |
Dimensional Datas Of Ansi Class 150 LB
| N PS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | mm |
| L/L1 | 8 | 8.5 | 9.5 | 11.5 | 16 | 19.5 | 24.5 | 27.5 | 31 | 36 | in |
| (RF/BW) | 203 | 216 | 241 | 292 | 406 | 495 | 622 | 698 | 787 | 914 | mm |
| L2 | 8 | 8.5 | 9.5 | 11.5 | 16 | 19.5 | 24.5 | 27.5 | 31 | 36 | in |
| (RTJ) | 203 | 216 | 241 | 292 | 406 | 495 | 622 | 698 | 787 | 914 | mm |
| H | 15 | 21 | 17.5 | 20.25 | 22 | 24.25 | 32 | 35.88 | 48.38 | 57 | in |
| (Open) | 380 | 535 | 445 | 515 | 560 | 615 | 815 | 910 | 1230 | 1450 | mm |
| Do | 7 | 10 | 11 | 11 | 13 | 13 | 16 | 18 | 20 | 24 | in |
| 180 | 240 | 280 | 280 | 320 | 320 | 400 | 450 | 500 | 60 | mm | |
| Wt(kg.) | 18 | 30 | 41 | 64 | 86 | 110 | 280 | 380 | 510 | 740 | RE |
| 14 | 22 | 33 | 43 | 72 | 88 | 245 | 345 | 450 | 665 | BW |
Dimensional Datas Of Ansi Class 300 LB
| N PS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | mm |
| L/L1 | 10.5 | 11.5 | 12.5 | 14.00 | 17.5 | 22 | 24.5 | 28.00 | in | ||
| (RF/BW) | 267 | 292 | 318 | 356 | 444 | 559 | 622 | 711 | mm | ||
| L2 | 11.12 | 12.12 | 13.12 | 14.62 | 18.12 | 22.62 | 25.12 | 28.62 | in | ||
| (RTJ) | 282 | 308 | 333 | 371 | 460 | 575 | 638 | 727 | mm | ||
| H | 16.75 | 19 | 19.88 | 22.50 | 25.25 | 33.25 | 35.5 | 38.62 | in | ||
| (Open) | 425 | 485 | 505 | 570 | 640 | 845 | 900 | 980 | mm | ||
| Do | 8 | 10 | 11 | 13 | 16 | 18 | 20 | 24 | in | ||
| 200 | 240 | 280 | 320 | 400 | 450 | 500 | 600 | mm | |||
| Wt(kg.) | 25 | 32 | 38 | 56 | 96 | 150 | 360 | 550 | RE | ||
| 20 | 22 | 27 | 41 | 75 | 117 | 310 | 492 | BW |
| No. | Part Name | Carbon Steel | ASTM Material 1/1/4cr-1/2 mo |
| 1 | Body | A216-WCB | A217-WC6 |
| 2 | Bonnet | A216-WCB | A217-W6 |
| 3 | Disc | A105+CR13 | A217-F11+HF |
| 4 | Stem | A182-F6a | CR-MO-V |
| 5 | Seat Ring | A105+HF | A182-F11+HF |
| 6 | Stem Backseat | A276-420 | A276-304 |
| 7 | Bonnet Gasket | Steel Ring | 304SS ring |
| 8 | Bonnet Stud | A193-B7 | A193-B16 |
| 9 | Bonnet Stud Nut | A194-2H | A194-7 |
| 10 | Packing | Graphite | |
| 11 | Gland | A276-420 | A276-304 |
| 12 | Gland Flange | A216-WCB | P.217-W6 |
| 13 | Eye Bolt Pin | Carbon Steel | A276-420 |
| 14 | Eye Boit | Carbon Steel | A193-B7 |
| 15 | Eye Boit Nut | Carbon Steel | A194-2H |
| 16 | Yoke Sleeve | Aluminum-Bronze | |
| 17 | Hand Wheel | Malleable Iron |
| NPS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | mm |
| L/L1 | 14.5 | 16.5 | 18.5 | 21.5 | 27.75 | 32.75 | in |
| (RF/BW) | 368 | 419 | 470 | 546 | 705 | 832 | mm |
| L2 | 14.62 | 16.62 | 18.62 | 21.62 | 28 | 33.12 | in |
| (RTJ) | 371 | 422 | 473 | 549 | 711 | 841 | mm |
| H | 22 | 23.25 | 29.5 | 36 | 48.62 | 65 | in |
| (Open) | 560 | 590 | 750 | 915 | 1235 | 1650 | mm |
| Do | 13 | 16 | 18 | 20 | 24 | 28 | in |
| 320 | 400 | 450 | 500 | 600 | 700 | mm | |
| Wt(kg.) | 68 | 97 | 116 | 215 | 445 | 795 | RF |
| 57 | 81 | 95 | 184 | 347 | 635 | BW |
| NPS | 2 | 2/1/2 | 3 | 4 | 6 | 8 | in |
| DN | 50 | 65 | 80 | 100 | 150 | 200 | mm |
| L/L1 | 17.75 | 20 | 22.75 | 26.5 | 36 | in | |
| (RF/BW) | 451 | 508 | 578 | 673 | 914 | mm | |
| L2 | 17.88 | 20.5 | 23 | 26.88 | 36.5 | in | |
| (RTJ) | 445 | 414 | 584 | 683 | 927 | mm | |
| H | 25.5 | 28.12 | 32.5 | 47 | 70.5 | in | |
| (Open) | 650 | 715 | 825 | 1195 | 1790 | mm | |
| Do | 16 | 18 | 20 | 24 | 28 | in | |
| 400 | 450 | 500 | 600 | 700 | mm | ||
| Wt(kg.) | 97 | 138 | 167 | 305 | 633 | RF | |
| 72 | 95 | 108 | 196 | 351 | BW |
| Size | 1" x 2" to 8" x 10" |
| Body | C.I./C.S./CF8/CF8M/Alloy Steel |
| Trim | C.S./Alloy Steel |
| Minimum Pressure | 20 PSI |
| Maximum Pressure | 20 PSI |
| Maximum Pressure | 3000 PSI |
| Temperature | 200 C |
