Other Products / Services #1687367

Formaldehyde(systematic namemethanal) is a naturally occurringorganic compoundwith theformulaCH₂O (H-CHO). It is the simplest of thealdehydes(R-CHO). The common name of this substance comes from its similarity and relation toformic acid.

Formaldehyde is an important precursor to many other materials and chemical compounds.

Formaldehyde is a common precursor to more complex compounds and materials. In approximate order of decreasing consumption, products generated from formaldehyde includeurea formaldehyde resin, melamine resin, phenol formaldehyde resin, polyoxymethylene plastics, 1, 4-butanediol, andmethylene diphenyl diisocyanate.^[11]Thetextile industryuses formaldehyde-based resins asfinishersto make fabrics crease-resistant.^[30]Formaldehyde-based materials are key to the manufacture of automobiles, and used to make components for the transmission, electrical system, engine block, door panels, axles and brake shoes.

Dimethylformamideis anorganic compoundwith theformula(CH₃)₂NC(O)H. Commonly abbreviated as DMF (although this initialism is sometimes used fordimethylfuran, ordimethyl fumarate), this colourless liquid is miscible withwaterand the majority of organic liquids. DMF is a commonsolventforchemical reactions. Dimethylformamide is odorless whereas technical grade or degraded samples often have a fishy smell due to impurity ofdimethylamine. As its name indicates, it is a derivative offormamide, theamideofformic acid. DMF is apolar(hydrophilic)aprotic solventwith a highboiling point. It facilitates reactions that follow polar mechanisms, such asS_N2reactions.

As a common and cheap reagent, DMF has many uses in the research laboratory

• DMF is effective at separating and suspendingcarbon nanotubes, and is recommended by theNISTfor use innear infrared spectroscopyof such.^[23]
• DMF can be utilized as a standard in proton NMR spectroscopy allowing for a quantitative determination of an unknown compound.
• In the synthesis of organometallic compounds, it is used as a source ofcarbon monoxideligands.
• DMF is a common solvent used inelectrospinning.
• DMF is commonly used in the solvothermal synthesis ofMetal Organic Frameworks.
• DMF-d₇in the presence of a catalytic amount of KOt-Bu under microwave heating is a reagent for deuteration of polyaromatic hydrocarbons.

Dimethyl sulfoxide(DMSO) is anorganosulfur compoundwith theformula(CH₃)₂SO. This colorless liquid is an importantpolaraprotic solventthat dissolves bothpolar and nonpolarcompounds and ismisciblein a wide range of organic solvents as well as water. It has a relatively high melting point. DMSO has the unusual property that many individuals perceive agarlic-like taste in the mouth after contact with the skin.^[2]

In terms of chemical structure, the molecule has idealizedC_ssymmetry. It has atrigonal pyramidal molecular geometryconsistent with other three-coordinate S(IV) compounds, ^[3]with anonbonded electron pairon the approximatelytetrahedralsulfur atom.

Glycerol(/lsrl/;^[5]also calledglycerineorglycerin; seespelling differences) is a simplepolyolcompound. It is a colorless, odorless, viscousliquid that is sweet-tasting and non-toxic. The glycerol backbone is found in alllipidsknown astriglycerides. It is widely used in the food industry as a sweetener andhumectantand inpharmaceutical formulations. Glycerol has threehydroxyl groupsthat are responsible for itssolubilityinwaterand itshygroscopicnature

Glycerol is used inmedical, pharmaceuticalandpersonal carepreparations, often as a means of improving smoothness, providinglubrication, and as ahumectant.Ichthyosisandxerosishave been relieved by the topical use glycerin.^[16][17]It is found in allergenimmunotherapies, cough syrups, elixirsandexpectorants, toothpaste, mouthwashes, skin careproducts, shaving cream, hair careproducts, soaps, and water-basedpersonal lubricants. In solid dosage forms like tablets, glycerol is used as a tablet holding agent. For human consumption, glycerol is classified by the U.S. FDA among thesugar alcoholsas a caloric macronutrient.

In food and beverages, glycerol serves as ahumectant, solvent, andsweetener, and may helppreserve foods. It is also used as filler in commercially preparedlow-fatfoods (e.g., cookies), and as athickening agentinliqueurs. Glycerol and water are used to preserve certain types of plant leaves.^[14]As asugar substitute, it has approximately 27kilocaloriesperteaspoon(sugar has 20) and is 60% assweetassucrose. It does not feed thebacteriathat formplaquesand causedental cavities.^{[citation needed]}As afood additive, glycerol is labeled asE numberE422. It is added to icing (frosting) to prevent it from setting too hard.

Hydrogen peroxideis achemical compoundwith the formulaH
2O
2. In its pure form, it is a pale blue, clearliquid, slightly moreviscousthanwater. Hydrogen peroxide is the simplestperoxide(a compound with an oxygenoxygensingle bond). It is used as anoxidizer, bleachingagent andantiseptic. Concentrated hydrogen peroxide, or "high-test peroxide", is areactive oxygen speciesand has been used as apropellantinrocketry.^[5]Its chemistry is dominated by the nature of its unstableperoxidebond.

Hydrogen peroxide is unstable and slowly decomposes in the presence of light. Because of its instability, hydrogen peroxide is typically stored with a stabilizer in a weakly acidic solution. Hydrogen peroxide is found in biological systems including the human body. Enzymes that use or decompose hydrogen peroxide are classified asperoxidases.

About 60% of the world's production of hydrogen peroxide is used forpulp- and paper-bleaching.^[

The second major industrial application is the manufacture ofsodium percarbonateandsodium perborate, which are used as mild bleaches inlaundrydetergents. Sodium percarbonate, which is an adduct ofsodium carbonateand hydrogen peroxide, is the active ingredient in such products asOxiCleanandTide laundry detergent. When dissolved in water, it releases hydrogen peroxide and sodium carbonate

Cyclohexaneis acycloalkanewith themolecular formulaC₆H₁₂(the alkyl is abbreviatedCy).^[5]Cyclohexane is mainly used for the industrial production ofadipic acidandcaprolactam, which are precursors tonylon. Cyclohexane is a colourless, flammable liquid with a distinctive detergent-like odor, reminiscent of cleaning products (in which it is sometimes used).^[6]

It is used as a solvent in some brands of correction fluid. Cyclohexane is sometimes used as a non-polar organic solvent, althoughn-hexaneis more widely used for this purpose. It's frequently used as arecrystallizationsolvent, as many organic compounds exhibit good solubility in hot cyclohexane and poor solubility at low temperatures.

Cyclohexane is also used for calibration ofdifferential scanning calorimetry(DSC) instruments, because of a convenient crystal-crystal transition at 87.1C.^[14]

Cyclohexane vapour is used in vacuum carburizing furnaces, in heat treating equipment manufacture.

The key features of our product are:

• The product has a consistently high Monoglyceride Content (of over 40%), which is a key ingredient required for the emulsification process.
• Our product is easily soluble in hot water aiding the ease of usage by the consumer for their production purposes.
• Our product features a unique white lustre denoting its purity. This helps in achieving desirable colour of the final products for our customers.
• We are a FSSAI-Approved and an ISO 9001:2015 certified company indicating the hygienic and controlled manufacturing process of GMS-SE.
• GMS-SE is a product available in both Powder and Flakes form as per the consumer’s requirement.

2-Ethylhexyl acrylatechemical compound which belongs to theacrylates. It is a colorlessliquidwith a sweet odour.

2-Ethylhexyl acrylate is together withbutyl acrylateone of the major base monomers for the preparation of acrylate adhesives. 2-Ethylhexyl acrylate can be react byfree-radical polymerizationto macromolecules having a molecular weight of up to 200, 000 g/mol. Other monomers such asvinyl acetate, methyl acrylate, styreneor molecules having functional groups may be copolymerized to modify the properties of the resulting polymer.^[2]