Write a Review
Our Products
Our product range contains a wide range of Disc Sander, Delta Sander OZI, Belt Sander and Pensander
Disc sander TG 125/E
For all wood types, steel, non-ferrous metals, precious metals, plastics (also Plexiglas and glass-fibre reinforced plastics).
Powerful drive and vibration-free running thanks to balanced DC motor. Housing of glass-fibre reinforced POLYAMIDE. Aluminium table tilting downwards through 50, 10 upwards, with angle stop. Planeturned sanding disc of die-cast aluminium covered with silicone film. This allows for effortless removal of sanding discs after use. Two additional square silicone films offer easy storage after use and thus re-use when needed. Machine can be secured both horizontally (with table) on the workbench, and also quickly and safely in vertical position. Suction connection and adapter to connect a vacuum cleaner for dust-free working. With each 2 sanding discs grit 80, grit 150 and grit 240.
Technical data:
230V. 140W. 50/60Hz. Adjustable grinding speed of approx. 250 800m/min (corresponds to 1, 150 3, 600rpm). Sanding disc 125mm. Table 98 x 140mm. Sanding height 62.5mm. Size 300 x 140 x 160mm. Weight approx. 3kg.
Both machines are equipped with suction connection and adapter for dust-free, clean sanding. We recommend our Compact Workshop vacuum cleaner CW-matic (see page 48) with integrated automatic switch control. The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
NO 28 160 80 grit 5 pieces
NO 28 162 150 grit 5 pieces
NO 28 164 240 grit 5 pieces
For grinding surfaces in very tight spots, e.g. corners, sides and inaccessible areas. The oscillating motion ensures quiet operation and also facilitates cutting. Insert and file! The variable speed facility ensures the correct speed for every material. Special, balanced, low noise DC motor with high life expectancy. Main housing of glass-fibre reinforced POLYAMIDE. Supplied with an HSS plunge saw blade (width 14mm) and 10 each sanding pads of 80, 150 and 240 grit. In an attractive case, as described on the right.
Technical data:
230V. 80W. Sanding frequency of 5, 000 12, 000rpm. Length 230mm. Weight 550g. Insulated to class 2.
Left-justified band grinder, making it possible to process surfaces right to the corner. Fine adjustment of rollers prevents lateral rolling off. Easy replacement of bands by means of a spring tension system without the use of tools. Housing is made of glass-fibre reinforced POLYAMIDE. Complete with screw clamp and with 5 x 150 grit and 240 grit grinding bands. Supplied in a practical case as described on page 8.
Technical data:
230V. 150W. Grinding band 40 x 260mm. Grinding surface 60 x 40mm, band speed 160m/min. Length 175mm. Weight 700g. Class 2 insulation.
NO 28 526
Grinding bands made from high-quality corundum (aluminium oxide)
Mounted on a high-performance support. For the grinding of metal, non-ferrous metals, wood and plastics. 40 x 260mm.
Linear (not rotating) stroke. Long-lasting special DC motor. Housing of glass-fibre reinforced POLYAMIDE. Four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self-adhesive sanding pads are included. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.
Ojasvi Corporation (Ojasvi Corporation)
403, Shree hari Tower,
Opp. Raj Chambers,
Khodiyar Colony
Jamnagar - 361006,
Gujarat., India
Share us via
