Post Buy Requirement
OO
Bhopal, Madhya Pradesh, India
Add Review

Other Products / Services

Optical Fiber Cables

Fiber-optic communication is a method of transmitting information from one place to another by sending pulses of light through an optical fiber. The light forms an electromagnetic carrier wave that is modulated to carry information.



The process of communicating using fiber-optics involves the following basic steps: Creating the optical signal involving the use of a transmitter, relaying the signal along the fiber, ensuring that the signal does not become too distorted or weak, receiving the optical signal, and converting it into an electrical signal.

View Complete Details

HDPE Pipes And Coils

It is made of either of three grades of High Density Poly Ethylene polymers. i.e PE-63, PE-80 or PE-100.



PRODUCT RANGE :These HDPE pipes are available in sizes 20 mm to 450 mm in pressure rating of PN-2.5, PN-4.0, PN-6.0, PN-8.0, PN-10.0 , PN-12.5 & PN-16.0 in all three grades PE-63, PE-80 and PE-100.




APPLICATIONS

Effluent and Waste Water Disposal:Effluents of varied chemical compositions can be effectively disposed of usingOm OptelHDPE pipes & coils, with the aid of the latest know-how on piping engineering, pipelines for waste collection and disposal in chemical industry. Longevity ofOm Optelpipes under such application would rate the best amongst the conventional pipe even under critical service conditions.



Domestic Gas Distributions :Earlier, engineers always carried a psychological fear in using HDPE pipes rather plastic pipes for conveyance of inflammably gases. However experiments and extensive trials proved these fears totally wrong and have established excellence of performance of HDPE pipes for conveyance of all type of combustible gases. Experiments have also proved that the permeable losses are insignificant in regard to safety and environmental impact



Submarine Pipelines :One of the most important applications where all salient features ofOm Optelpipes prominently figure out is for under water pipelines.Om Optelpipes have been successfully laid for under water river crossing, creek crossing, marine out-falls and for brine intake lines in the open sea. Hazardous chemical effluents and radio active wastes are being harmlessly disposed into deep sea throughOm Optelpipes with substantial cost savings. Schemes which would have been dropped due to economical un-viability have been made feasible withOm Optelpipes.

View Complete Details

Hdpe Sprinkler System

  • M.F.I.(190°C, 5kg load) 0.41 to 1.1gm/10 mins
  • Specified base density 940.4 to 946.4 Kg/mtr 3
  • Material Grade PE-63, PE-80, PE-100
  • Carbon Blank (2.5 ± 0.5%)
  • Antioxidant < 0.5% by mass
  • Tensile strength (min) (27 ± 2°C) 19MPa (Testing speed = 100mm/min 10%)
  • Elongation >350%
  • Reversion <=3%
  • Hydraulic Characteristics No sign of localized swelling. leakage or weeping (at 80°C for 165 & 48 hrs.)

Agronomists all over the world believe that the sprinkler irrigation system is the best method to get maximum yield at an extremely low cost. Using sprinkler system can irrigate 2 to 3 time more farm land with same quantity of water. The sprinkler system cleans the surface of the plants, which help in easy photosynthesis thus making plants able to produce more. It save from irregularities of the weather. In winters it saves from freezing of water. In summers it saves evaporation of water up to 40 %. The Sprinkler effect (like rain)saves water from flowing away and maximum water reaches to the roots of the plants. It spreads water around the farm in equal quantity thus saving plants from bad effects of water clogging and water scarcity. With Sprinkler Irrigation System farming can be done easily on uneven surfaces.



CONSTRUCTION :HDPE High Density Poly Ethylene is the most popular variety of polymers. Om Optel sprinkler pipe is made of HDPE plastic material. It is the recommended material for the manufacture of high pressure pipes and is renowned world wide for its reliability. The characteristics that makes it outstanding are its toughness, its resistance to chemical attack and its immunity to weather conditions. This makes it an excellent material to convey water.



PRODUCT RANGE :Om Optel sprinkler pipes are available in 63 mm to 200 mm diameter and pressure rating class I, II, III, IV and Part I and part II. PN-2.5 and PN-3.2, PN-4.0, PN-6.0 with complete range of fittings.

View Complete Details

Plb Hdpe Ducts


Om Optel Permanently Lubricated HDPE Ducts are formed by co extrusion technique and are used for laying Optical Fiber Cables as under ground ducting / conduits.




MATERIAL :The base raw material being used for the manufacturing Permanently Lubricated Ducts is High Density Poly Ethylene. The grade of raw material is ultra violet grade and is confirming to IS:7328-1992 & IS : 2523 or ISO : 1183 & ISO : 1133 and is designated as PEELA-50T-012 (CACT Approved) and inner layer permanently lubricated material DOW CORNING grade-50MB002.




APPLICATIONS :Telecommunication, Computer Network, Automatic Signaling, Railways Information Network. Highways, Cable Service Providers, Broad Band networks, Electric cable installation etc.



View Complete Details

Multilayer Polyfilms

Multilayer Film, Shrink Film Milk Packaging Film, Milk Powder Packaging Film, Lamination Film, Liquid Packaging Film, Mulch Film, Oil and Food Packaging Film, Water Pouch Film, Liner of LD/HM and laminates as our future development.



Multilayer Packaging Film


Lamination Film

View Complete Details

Injection Molding Components

Plastic injection molding components All types of ctc caps & plastic closures Like edible oil bottle caps, soft drink caps, water bottle caps and Injection molded articles suitable for 180 ton machine.

View Complete Details

Patch Cords

Fiber optic patch cable, also called fiber optic patch cord or fiber patch cord, is one of the most basic and important parts in optical communication. Fiber optic patch cable is generally used for linking the equipment and components in the fiber optic network, eg. linking between the fiber optic converter and termination box. At the ends of fiber optic patch cable, there are fiber optic connectors.In general, the fiber optic patch cable types are classified by the fiber optic connector types. The commonly used fiber optic patch cable types include SC fiber patch cord, ST fiber optic patch cord, LC fiber optic patch cord, FC fiber optic patch cord etc.



In addition, if fiber optic patch cable has the same type of connector on both ends, we call it the same connector type fiber patch cable, otherwise, it is called hybrid fiber optic patch cables. According to its fiber cable mode or fiber cable structure, fiber optic patch cable can be divided into singlemode fiber optic patch cable and multimode fiber optic patch cable or simplex fiber optic patch cable and duplex fiber optic patch cable.

View Complete Details

Shrink Films

Shrink Films Manufacturers find usage in meeting the demands of packaging bulk goods in an industrial setup. We offer these films in different sizes and specifications as requested by the customers. Coming in quality finish, these films provide economical temper evident packaging support to the manufactured goods.



The design is such that while blowing the perform you will get uniform material distribution resulting in superior sturdiness and improved transparency. The preforms are made under stringent quality control class 10, 000 conditions. Hence the preforms are free of dust and of superior quality. This gives our customers trouble free production with near zero rejections which saves valuable time as well as reduces their production costs.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Om Optel Industries Pvt. Ltd (Om Optel Industries Pvt. Ltd)
  • E-1, New Industrial Area No. 2 , Dist. Raisen-462046 (M.P), Mandideep, Bhopal, Madhya Pradesh
  • Share us via
Retailer from Bhopal, Madhya Pradesh
Post Buy Requirement
OO
Bhopal, Madhya Pradesh, India
Add Review

Our Products

Optical Fiber Cables

Fiber-optic communication is a method of transmitting information from one place to another by sending pulses of light through an optical fiber. The light forms an electromagnetic carrier wave that is modulated to carry information.



The process of communicating using fiber-optics involves the following basic steps: Creating the optical signal involving the use of a transmitter, relaying the signal along the fiber, ensuring that the signal does not become too distorted or weak, receiving the optical signal, and converting it into an electrical signal.

View Complete Details

HDPE Pipes And Coils

It is made of either of three grades of High Density Poly Ethylene polymers. i.e PE-63, PE-80 or PE-100.



PRODUCT RANGE :These HDPE pipes are available in sizes 20 mm to 450 mm in pressure rating of PN-2.5, PN-4.0, PN-6.0, PN-8.0, PN-10.0 , PN-12.5 & PN-16.0 in all three grades PE-63, PE-80 and PE-100.




APPLICATIONS

Effluent and Waste Water Disposal:Effluents of varied chemical compositions can be effectively disposed of usingOm OptelHDPE pipes & coils, with the aid of the latest know-how on piping engineering, pipelines for waste collection and disposal in chemical industry. Longevity ofOm Optelpipes under such application would rate the best amongst the conventional pipe even under critical service conditions.



Domestic Gas Distributions :Earlier, engineers always carried a psychological fear in using HDPE pipes rather plastic pipes for conveyance of inflammably gases. However experiments and extensive trials proved these fears totally wrong and have established excellence of performance of HDPE pipes for conveyance of all type of combustible gases. Experiments have also proved that the permeable losses are insignificant in regard to safety and environmental impact



Submarine Pipelines :One of the most important applications where all salient features ofOm Optelpipes prominently figure out is for under water pipelines.Om Optelpipes have been successfully laid for under water river crossing, creek crossing, marine out-falls and for brine intake lines in the open sea. Hazardous chemical effluents and radio active wastes are being harmlessly disposed into deep sea throughOm Optelpipes with substantial cost savings. Schemes which would have been dropped due to economical un-viability have been made feasible withOm Optelpipes.

View Complete Details

Hdpe Sprinkler System

  • M.F.I.(190°C, 5kg load) 0.41 to 1.1gm/10 mins
  • Specified base density 940.4 to 946.4 Kg/mtr 3
  • Material Grade PE-63, PE-80, PE-100
  • Carbon Blank (2.5 ± 0.5%)
  • Antioxidant < 0.5% by mass
  • Tensile strength (min) (27 ± 2°C) 19MPa (Testing speed = 100mm/min 10%)
  • Elongation >350%
  • Reversion <=3%
  • Hydraulic Characteristics No sign of localized swelling. leakage or weeping (at 80°C for 165 & 48 hrs.)

Agronomists all over the world believe that the sprinkler irrigation system is the best method to get maximum yield at an extremely low cost. Using sprinkler system can irrigate 2 to 3 time more farm land with same quantity of water. The sprinkler system cleans the surface of the plants, which help in easy photosynthesis thus making plants able to produce more. It save from irregularities of the weather. In winters it saves from freezing of water. In summers it saves evaporation of water up to 40 %. The Sprinkler effect (like rain)saves water from flowing away and maximum water reaches to the roots of the plants. It spreads water around the farm in equal quantity thus saving plants from bad effects of water clogging and water scarcity. With Sprinkler Irrigation System farming can be done easily on uneven surfaces.



CONSTRUCTION :HDPE High Density Poly Ethylene is the most popular variety of polymers. Om Optel sprinkler pipe is made of HDPE plastic material. It is the recommended material for the manufacture of high pressure pipes and is renowned world wide for its reliability. The characteristics that makes it outstanding are its toughness, its resistance to chemical attack and its immunity to weather conditions. This makes it an excellent material to convey water.



PRODUCT RANGE :Om Optel sprinkler pipes are available in 63 mm to 200 mm diameter and pressure rating class I, II, III, IV and Part I and part II. PN-2.5 and PN-3.2, PN-4.0, PN-6.0 with complete range of fittings.

View Complete Details

Plb Hdpe Ducts


Om Optel Permanently Lubricated HDPE Ducts are formed by co extrusion technique and are used for laying Optical Fiber Cables as under ground ducting / conduits.




MATERIAL :The base raw material being used for the manufacturing Permanently Lubricated Ducts is High Density Poly Ethylene. The grade of raw material is ultra violet grade and is confirming to IS:7328-1992 & IS : 2523 or ISO : 1183 & ISO : 1133 and is designated as PEELA-50T-012 (CACT Approved) and inner layer permanently lubricated material DOW CORNING grade-50MB002.




APPLICATIONS :Telecommunication, Computer Network, Automatic Signaling, Railways Information Network. Highways, Cable Service Providers, Broad Band networks, Electric cable installation etc.



View Complete Details

Multilayer Polyfilms

Multilayer Film, Shrink Film Milk Packaging Film, Milk Powder Packaging Film, Lamination Film, Liquid Packaging Film, Mulch Film, Oil and Food Packaging Film, Water Pouch Film, Liner of LD/HM and laminates as our future development.



Multilayer Packaging Film


Lamination Film

View Complete Details

Injection Molding Components

Plastic injection molding components All types of ctc caps & plastic closures Like edible oil bottle caps, soft drink caps, water bottle caps and Injection molded articles suitable for 180 ton machine.

View Complete Details

Patch Cords

Fiber optic patch cable, also called fiber optic patch cord or fiber patch cord, is one of the most basic and important parts in optical communication. Fiber optic patch cable is generally used for linking the equipment and components in the fiber optic network, eg. linking between the fiber optic converter and termination box. At the ends of fiber optic patch cable, there are fiber optic connectors.In general, the fiber optic patch cable types are classified by the fiber optic connector types. The commonly used fiber optic patch cable types include SC fiber patch cord, ST fiber optic patch cord, LC fiber optic patch cord, FC fiber optic patch cord etc.



In addition, if fiber optic patch cable has the same type of connector on both ends, we call it the same connector type fiber patch cable, otherwise, it is called hybrid fiber optic patch cables. According to its fiber cable mode or fiber cable structure, fiber optic patch cable can be divided into singlemode fiber optic patch cable and multimode fiber optic patch cable or simplex fiber optic patch cable and duplex fiber optic patch cable.

View Complete Details

Shrink Films

Shrink Films Manufacturers find usage in meeting the demands of packaging bulk goods in an industrial setup. We offer these films in different sizes and specifications as requested by the customers. Coming in quality finish, these films provide economical temper evident packaging support to the manufactured goods.



The design is such that while blowing the perform you will get uniform material distribution resulting in superior sturdiness and improved transparency. The preforms are made under stringent quality control class 10, 000 conditions. Hence the preforms are free of dust and of superior quality. This gives our customers trouble free production with near zero rejections which saves valuable time as well as reduces their production costs.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Om Optel Industries Pvt. Ltd (Om Optel Industries Pvt. Ltd)
  • E-1, New Industrial Area No. 2 , Dist. Raisen-462046 (M.P), Mandideep, Bhopal, Madhya Pradesh
  • Share us via