Good Quality Refined Green Mineral Oil for Hot Melt Adhesive-KN4010 1. Product IntroductionThe product takes karamay Sinkiang low condensate naphthenic crude oil as the raw material, through the atmospheric vacuum distillation cutting out the appropriate fraction, then through via the high pressure hydrogenation device to refine and then and produce the ultimate aim product: refining produces the final purpose product.2. Product Specification | Analysis Items | KN4010 | Test Method |
| Appearance | Crystal Clear | Visual Test |
| Seibert Color | +30 | GB/T3555 |
Kinematic Viscosity
(40C), mm2/s | Report | GB/T 265 |
Kinematic Viscosity
(100C), mm2/s | 9.011.0 | GB/T 265 |
| Density(20C), kg/m3 | Report | GB/T 1884 |
| Flash Point, (Opening), C | 200 | GB/T 3536 |
| Pour Point, C | -15 | GB/T 3535 |
Carbon Type Analysis % | CA | 1 |
SH/T 0725 |
| CN | 40 |
| CP | Report |
The above technical parameters only represent the typical data of standardized brand products, the specific products shall be subject to the actual contract provisions.3. Product Feature1) Lower pour point and excellent low temperature fluidity, free of any coagulant 2) Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and suitable appropriate solubility
3) Stable carbon skeleton, reasonable hydrocarbon composition
4) The product is highly refined and keeps good solubility with rubberDeeply refined, good intermiscibility with rubber.
4. Product Consideration
All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
Storage & preservation:It must be placed in cool and ventilated place. Insolation and moisture are prohibitied.
5. Product Application
The oil can be applicated to hot melt adhesive, vaseline, shoe sole material / TPR, unguent, top grade greese
Write a Review
Mr. Jitendra Prabhakar Deva & Mr. Manoj Prabhakar (Orange Chem Traders)
27, Mirchi Market, Mahadev Street, Chawri Bazar, delhi - 110006, India
Share us via
