Our Products
We offer the best product range of Traversing Servo Robot and Swing Arm Robots.
We follow strict quality strategy, guidelines and thus, to sustain good quality standards, we carry out stern examination of the raw inputs used at the initial stages. With our inventory management system, we are capable to undertake urgent and massive requirements of the buyers at a time.
Graph
Technical Specifications
D: Double Arm Lable
60NI/min AirConsumption60NI/min
|
(Model) |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
M |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SHC-800WD |
2420 |
550 |
1500 |
1250 |
1520 |
570 |
1050 |
800 |
850 |
200 |
100 |
70 |
120 |
|
SHC-900WD |
2420 |
550 |
1500 |
1300 |
1520 |
570 |
1050 |
900 |
850 |
200 |
100 |
70 |
120 |
|
SHC-1100WD |
2720 |
550 |
1800 |
1400 |
1820 |
570 |
1250 |
1100 |
1150 |
200 |
100 |
70 |
120 |
|
SHC-1300WD |
3120 |
550 |
2200 |
1500 |
1820 |
570 |
1250 |
1300 |
1150 |
200 |
100 |
70 |
120 |
|
SHC-1400WD |
3820 |
550 |
2900 |
1550 |
2120 |
570 |
1550 |
1400 |
1450 |
200 |
100 |
70 |
120 |
|
SHC-1600WD |
3820 |
550 |
2900 |
1650 |
2120 |
570 |
1550 |
1600 |
1450 |
200 |
100 |
70 |
120 |
|
SHC-1800WD |
4020 |
550 |
3100 |
1750 |
2220 |
570 |
1650 |
1800 |
1550 |
200 |
100 |
70 |
120 |
As a famed name in the industry, buyers can stay rest assured for on-time delivery as we are supported by modern facilities. Only high-quality raw materials have been used for the production of our entire range. We check the raw materials against varied quality parameters before procurement.
Graph
Technical Specifications
| (Model) | (Unit) | SS-550(V) | SS-650(V) | SS-550D | SS-650D | |
|---|---|---|---|---|---|---|
| (Type) | (Single Arm Label) | (Double Arm lable) | ||||
| (I.M.M.range) | Ton | 50~120 | 100~180 | 50~120 | 100~180 | |
| (Vertical Stroke) | MM | 550 | 650 | 550 | 650 | |
| Crosswise Stroke) | MM | 120 | 120 | 120 | 120 | |
| Swing angle | Degree | 45~90 | 45~90 | 45~90 | 45~90 | |
| (Gripper rotation angle) | Degree | 90 | 90 | 90 | 90 | |
| (Max,Loding) | Kg | 2 | 2 | 2 | 2 | |
| (Dry Take Out Time) | Sec | 0.7 | 0.8 | 0.7 | 0.8 | |
| (Dry Cycle Time) | Sec | 3.2 | 3.4 | 4.4 | 4.6 | |
| (Drive System) | (Pneumatic Cylinder) 5(0.5)kgf/cm² |
|||||
| (Working Pressure) | ||||||
| (Air Consumption) | NI/cycle | 1.0 | 1.2 | 1.4 | 1.6 | |
| (Power Source) | Ac | AC50/60HZ | ||||
| (Power Capacity) | Kva | 0.2 | 0.2 | 0.2 | 0.2 | |
| (Net Weight | Kg | 40 | 42 | 50 | 52 | |
D:Double Arm Lable
V:With vacuum generator and vacuum EOAT(These models require additional air consumption of 10 NI/cycle)
| (Model) | A | B | C | D | E | F | G | H | J | K | L | M |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SS-550D |
1370 |
178 |
345 |
540(580) |
182 |
280 |
440(480) |
120 |
80 |
150 |
140 |
550 |
|
SS-650D |
1470 |
178 |
345 |
540(580) |
182 |
280 |
440(480) |
120 |
80 |
150 |
150 |
650 |
|
SS-650D |
1570 |
178 |
345 |
540(580) |
182 |
280 |
440(480) |
120 |
80 |
150 |
150 |
750 |