Our Products
A manifold is the hub of a plumbing system that distributes supply water to distribution lines throughout a home. Parshva manifolds are easy to install and are growing in popularity throughout the India and Africa . There are a variety of Parshvamanifold systems available. Each manifold system has a variety of adapters, end caps, and fitting assemblies that can be purchased to customize the manifold to various applications.
We have PU Hose also in wall thickness of 1.2mm & 2.5mm. This Heavy Duty PU Hose mainly use to convey some material like powder, granules some chemicals etc. Inner surface for these PU Hoses is smooth so better conveying of materials. This product is also Made in Germany.
Mould Clamp is designed specially for low height applications only such as clamping of moulds on plastic injection moulding machines & pressure die casting machines. The compact front portion of the clamp enables it to penetrate into the limited clamping area of the mould and clamp it. The positioning of forged swival washer on required curved groove enables the operator to set the center distance between the clamping portion and the clamping bolt as per the nearest tapped hole available on platen (where there are no T-slots). No supports are required at the rear of the clamp as the rear portion rests on the platen and front holds the mould. Flanged nut is tightened on the swival washer which takes care of the positioning of clamp body. These clamps are equally useful on pressure die casting machines, hydraulic presses & power presses where low height clamping is done. Clamps are supplied complete with swival washer, flanged nut & clamping stud or T-Bolt as shown in tables below.
A quick connect fitting is used to provide a fast, make-or-break connection of fluid transfer lines. Also called a quick disconnect or quick release coupling. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. When equipped with self-sealing valves, quick connect fittings will, upon disconnection, automatically contain any fluid in the line.
couplings up to 140 Mpa for high pressure applications
Brass & Stainless Steel for best quality
compact products for installation in restricted areas
non spill couplings to protect the work place and the environment
stainless steel fittings & couplings for use with dangerous and corrosive fluids
Our Hopper Magnets provide a properly configured, high-density magnetic field to trap and hold ferrous fines, fragments, and small metal objects. Stainless steel tubing and frames are welded into strong, integral units. They can be installed or simply laid inside hoppers, housings, and bins and easily removed for cleaning. Grates are built for low-abrasion applications and should measure at least twice the size of your outlet opening, so as not to restrict product flow.
Parshva Hopper Magnets come in a variety of shapes and sizes for use in round, square, or rectangular hoppers, chutes, housings, and bins.
They are ideal for trapping ferrous objects in free-flowing materials conveyed by gravity.
Standard Magnet dimensions range from 6 to 36.
Our water flow regulators WFR series allow make a precise and individual control in each of the zones. New design, high quality components make it one of the most competitive in the market.
Two models are available:
ZS model bottom body with pipe connections 12
ZR model bottom body with 3/8 socket connections
Main Technical Features | ||
1. Tube made of polyamide (Standard).2. Bodies made of PA 6 with 30% fiberglass.3. Regulating Taps in brass.4. Thermometer (Standard).5. Vitrilic rubber orings in vitrilo (hardness 70 SHA).6. Brass inlet and oulet valves are inserted in the body.7 Maximum working temperature 95C |
In order to operate hydraulic systems without failure, hydraulic systems are equipped with precise high-tech components. Sludge, resin & dirt in the oil cause friction, wear and malfunction of the hydraulic systems. More than 80% of hydraulic failure s are caused by impurities in the oil.
The mechanically oil cleaner removes sludge & dirt particles from hydraulic oil and other mineral oil which is as clean as with NAS value 8. Malfunction of hydraulic oil is extended. The cleaned hydraulic oil is much cleaner than new oil.
Features and Benefits | |
1. Fast return of investment.2. Precise operation of your hydraulic system.3. Improved process reliability.4. Less production cost.5. Improved availability of your machine.6. Less cost for maintenance, repairing and oil change.7. Up to 70% less downtime.8. Up to 95% less consumption of hydraulic oil. |
MODEL | Filter-1 | Filter-2 | Filter-3 | Filter-4 |
PEOCM2 | 50µ | 25µ | 10µ | 10µ/6µ |
PEOCM4 | 50µ | 25µ | 10µ | 10µ/6µ |