GST : 21AAOFP1228M1Z6
Our Products
Our Complete range of products are Horizontal Alligator Scrap Shearing Machine, Under Crank Shearing Machine, INCLINABLE TYPE POWER PRESS MACHINE(, Nibbling Machine and Ball Press Machine.
Specifications
| Model | TLPAS 25 | TLPAS 30 |
|---|---|---|
| Blade Size | 25 inch | 30 inch |
| Cylinder | 2 nos | 2 nos |
| Oil Tank | 200 Ltr (not in our scope) | 200 Ltr (not in our scope) |
| Electric Panel | Provided | Provided |
| Motor | 15 H.P.,1440 RPM,3 Phase,50 HZ | 15 H.P.,1440 RPM,3 Phase,50 HZ |
| Body Plate | 16 mm,20 mm Fabricated Body | 16 mm,20 mm Fabricated Body |
| Suitable For | 25 mm Round Bar,Ms Pipe,Angle,Ms Flat | 25 mm Round Bar,Ms Pipe,Angle,Ms Flat |
FrameMade of cast iron with high grade quality, properly seasoned after rough machining. Bearing surfaces are hand scrapped.
Crank shaftMade of special steel to withstand the effective load, property machined, fitted in bushes with high accuracy.
Ram slideMade of cast iron with high grade quality, property seasoned after rough matching, Bearing surfaces are hand scrapped, with remand hole for die clamping.
Fly wheelMade of high grade cast iron and is designed to generate the required energy.
BrakeThe Brake is powerful and works on the top dead compensated by springs.
StrokePresses are manufactured with adjustable stroke and adjustments can be made by means of a worm.
ClutchThe clutch is very rigid, better supported and less liable to suffer damage under heavy operating conditions the clutch gives continuous stroke for mass production.
Rolling keyThe key is double key rolling type made out of special alloy steel of EN series.
LubricationAn efficient lubrication system can be provided to lubricate the sliding surfaces and moving parts at extra cost.
Elector & double key systemThese can be provided specially for the use of springs dies against extra cost.
Rigid, Interlock designed, heavily welded construction of MS plates and sections to take full load with minimum deflection. The arm is guided throughout its length by fiber guideways ensuring proper clean cut. A rigid clutch mechanism is provided for giving continuous strokes for production.
The spring loaded Mechanical Hold Down maintains a positive and uniform pressure along the full length of work piece avoiding slipping and bowin of sheet resulting a clean square cut.
HIPAT Shears are provided with four edge rectangular high quality High Carbon High Chromium (HCHC) knives for longer life. Gun Metal Bushes are provided in all running parts. A rigid and accurate mechanical back gauge & hand operated Single Shot Lubrication system is provided with all HIPAT shears as standard equipment.
Mr. Hitesh Pathak (Pathak Machines Industries)
Plot No. 133, Phase 1, New Industrial Estate, Jagatpur, Cuttack, Odisha - 754021
https://www.pathakmachinesindustries.in
Share us via
