Cuttack, Odisha, India
Verified
Add Review
Our Products
Specifications
| Model | PHB 16 | PHB 20 | PHB 24 (TRIPLE ACTION JUMBO) |
|---|---|---|---|
| Baling Chamber | 25''X16''X52''(HXWXL) | 29'' X 20'' X 52''(HXWXL) | 28X25X58 H X W X L |
| Bale Size | 16'' X 16'' X (H X W X) | 20'' X 20'' X (H X W X) | - |
| Electric Motor | 15 H.P 3 PHASE 1440 RPM | 20 H.P 3 PHASE 1440 PM(Cromption Motor) |
30H.P 3PHASE 1440 RPM |
| Body | FABRICATED (45 + 12 MM) | FABRICATED (45 + 12 MM) | ABRICATED (50 + 12 MM) |
| Oil Drive | VAN PUMP SYSTEMS. | VAN PUMP SYSTEMS. | VAN PUMP SYSTEMS. |
| Working Liquid | HYDRO/ENCLO-68 (NOT IN OUR SCOPE) |
HYDRO/ENCLO-68(NOT IN OUR SCOPE) | Hydro/Enclo-68(Not in Our Scope) |
| No of Cylinder | 2 Nos./4Nos for auto eject | 2 Nos. / 4 Nos for auto eject | 5nos |
| Force on Lid | 40 Tons | 40 TONS | 50 TONS |
| Force on Main Cylinder | 80 Tons | 100 TONS | 120 TONS |
| Bale Ejection | By Cylinder | By Cylinder | By Cylinder |
| Door Lock | By MANUAL / HYD FOR AUTO MODEL | By MANUAL/HYD FOR AUTO MODEL |
Auto |
| Working Pressure | 3000 PSI | 3000 PSI | - |
| Hard Liner Plates | PROVIDED | PROVIDED | PROVIDED |
| Starter | OPTIONAL | PROVIDED | PROVIDED |
| Weight of the Bale | 25 TO 40 KG. | 70 KG. | - |
| Idle Cycle Time | 50-55 SECONDS | 50 -55 SECONDS | - |
| Oil Tank Capacity | 400 LTS. | 500 LTS | - |
| Opertion of the Machine | MANUAL THROUGH LEVERS |
MANUAL THROUGH LEVERS | - |
Hand Shears & Rod Cutters
HIPAT Shear is designed for manual cutting of hard sheet metals, it can cut strips, irregular shapes or slit sheet of steel and other materials. It has improved functional facilities and its convenient in operation.
HIPAT Hand shear is operated by repeatedly raising or lowering the lever as you feed the material through the machine, the length of its cut is not a limitation.
Features. High durability. Low Maintenance cost. Trouble free operation. Rigid cutter body. Easily replaceable spares. 4 Edge Blade with one piece material
Special Features :Easy set-up and heavy duty vice.Positive clamping on full range of capacity.Economic in power consumption.Special swing cut operation for fast cutting.Specially designed heavy duty gear box.Automatic switch off after cutting of piece.Double thrust bearing to support the vice control.High tension spring to control the machine balance.Wear resistant blade guide.Less material wastage.
Bandsaw wheel and drive systemThe bandsaw wheel are cast iron for long productive life, the deflection free wheel spindles ensure the wheel run true regardless of tension stress cutting load.
The spindle assemblies in corporate tapered roller bearing for greater rigidity and long service life.
We are backed by a pool of qualified and experienced professionals in manufacturing world-class Milling Cum Drilling Machines, Auto Feed Drilling Cum Milling Machine that comprises Fine feed and Autofeed both. These are customized in terms of capacity, drilling head, working range and power. manufactured from quality raw material, these are high in performance, durable.
Auto Feed Drilling Cum Milling Machine
Item Code:MD38BA-38mmCapOur 38 mm Drilling cum Milling Machine (MD38BA) is having Autofeed with Fine feed both together incorporated with precision parts.
FeaturesAvailable with Auto feed & fine feed (MD38BA)Carries 38mm drilling and 25mm milling capacityProvided with fine feed for giving control of depth of cut for milling operations andInstalled with two auto feed speeds for drilling, boring and reaming operationOffered with best quality MT-4/E 40 collet holder and rest nutThe working table can be tilted 45 left and rightLong bottom of column offers rigidity to the machineTo utilize the maximum space The base table of the machine is fitted with coolant tankg.
Hydraulic Feed ControlHydraulic Relief to Swa Blades on non-cutting Stroke.Automatic lift to bow on completion of cutting cycle and motor switched off automatically.Two speeds and driven by V- Belts.Cut Metals of all kinds and strengths.High output at low initial cost.
Saw frameThis is of rigid construction and runs in prismatic gudide ensuring a square and parallel cut, this cut takes place on the draw stroke and the blade is hydraulically lifed out of contact with workpiece on the forward to prevernt stroke to prevernt wear or the blade and can cut metals of all kinds and strength.
FeedTwo leavers are provided at the dash pot one regulates the rate of feed while the other enables to be raised or forwarded hydraulically bow raised automatically and motor switched off on completion of the cut.
BedThe bed of his large proportion provided with guide ways for the vice for clamping the material vice is of rigid construction one jaw remains fixed and the other can be adjusted according to the materials to be cut.
Electical equipmentA direct on line push button starter can be fitted which incorporates an adjustable trip mechanism which stops the machine as soon as the blade is clear from the work, non productive time is reduced to minimum.
DrivePower is supplied by a suitable electric motor through vee-belt which are full adjustable for tension all drive mechanism being totally enclosed.
SpeedThe incorporation of two speed driving mechanism allows for the most suitable speed to be selected for material being cut.
CoolantThe coolant tank is totally enclosed in the machine base and a contant speed pump supplies coolant to the saw blade through a stay put pipe and tap.
| Tilting working table | FIXED |
| Drilling capacity | 25 mm |
| Pillar Diameter | 92 mm |
| Spindle nose to table distance | 660 mm |
| Distance from spindle nose to base distance | 1045 mm |
| Distance from spindle center to pillar surface | 250 mm ( MAX ) |
| Table Travel | 480 mm |
| Taper in spindle | MT – 3 |
| Number of speed | 8 Speed |
| Range of Speed (RPM) | 130 to 2600 |
| Table Size (in mm) | 330 x 330 |
| Base size (Machined Area mm) | 365 x 575 |
| Overall Base Size (in mm) | 370 x 580 |
| Spindle Travel | 180 mm |
| Pillar Length | 1410 mm |
| Overall height with pulley guard | 1730 mm |
| V-Belt section | B – 52″ |
| Weight (Approx.) | 225 kg. |
| Motor1440 RPM 3 Phase440 volts | 1 HP |
| Shipping Wooden Case Inner Size LxWxH (in mm) |
850x450x1770 mm |
In the vertical mill the spindle axis is vertically oriented. Milling cutters are held in the spindle and rotate on its axis. The spindle can generally be extended (or the table can be raised/lowered, giving the same effect), allowing plunge cuts and drilling. There are two subcategories of vertical mills: the bed mill and the turret mill.
| ALL GEARED | ||
| Specification | Model No.2 | Model No.3 |
| Table Size | 280x1270mm | 310x1450mm |
| Table Travel Longitudinal | 660mm | 735mm |
| Table Feeds | 9/repid | 9/repid |
| Tee Slot | 3/16mm | 3/16mm |
| Cross Travel | 280mm | 310mm |
| Knee Travel | 400mm | 500mm |
| Cutter Arbor | 25.4mm# | 25.4mm # |
| Spindle Taper | ISO 40# | ISO 40# |
| Spindle Speeds RPM | 9 speeds 40-1050 | 9 speeds 40-1050 |
| Spindle Motor | 5H.P. | 5 H.P. |
| Feed Motor | 2H.P. | 2H.P. |
| Coolent Pump | 0.10 H.P. | 0.10 H.P. |
| Optional Mark as * | ||
Squaring arm 1000mm at left with hardened lines.
Squaring arm 600mm at right helps distribute wear.
Front gauging with stops, scale on squaring arm.
Hardened rods recessed table for easy sheet feeding.
Sheet supports 1000mm help supports long plates.
Ramp on rear slides cut out sheet outside shear area.
Foot switch movable for operation from self position.
Finger safety guard with clear view of lighted cutting area.
Efficient compact power pack minimum piping.
Electrical neatly wired-cabled for trouble shooting.
| Model | Shearing Length mm |
Shear Thic. Rake Angle/(Min./Max.) | Rake Angle | Rake Angle Range | Strokes/Minute at Min. & Max. Rake Angle |
Holddowns | Holding Force kgs. | Power H.P. | Over all Diamensions in mm (L x W x H ) |
Approx. Weight Kgs. |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| LHVR325 | 2500 | 3.15 / 4 | 2 / 3 | 1’15” | 0.5-2” | 28-13 | 13 | 2500 | 5 | 3150 x 2000 x 2400 | 3800 |
| LHVR330 | 3000 | 3.15 / 4 | 2 / 3 | 1’15” | 0.5-2” | 24-9 | 16 | 2500 | 5 | 3500 x 2000 x 2400 | 4400 |
| LHVR412 | 1250 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 33-17 | 5 | 4000 | 5 | 2000 x 2000 x 2400 | 2700 |
| LHVR415 | 1500 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 30-15 | 8 | 4500 | 5 | 2250 x 2000 x 2400 | 3200 |
| LHVR420 | 2000 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 28-13 | 11 | 6200 | 7.5 | 2750 x 2000 x 2400 | 3500 |
| LHVR425 | 2500 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 26-8 | 13 | 8000 | 7.5 | 3400 x 2350 x 2450 | 5200 |
| LHVR430 | 3000 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 24-6 | 16 | 10000 | 10 | 4000 x 2350 x 2450 | 6000 |
| LHVR440 | 4000 | 4 / 6 | 3 / 4 | 1’45” | 0.5-3“ | 22-6 | 20 | 12000 | 10 | 4500 x 2350 x 2450 | 8500 |
| LHVR615 | 1500 | 6 / 8 | 4 / 6 | 1’45” | 0.5-3“ | 24-8 | 9 | 6600 | 10 | 2250 x 2350 x 2500 | 4000 |
| LHVR620 | 2000 | 6 / 8 | 4 / 6 | 1’45” | 0.5-3“ | 22-7 | 11 | 6500 | 10 | 2750 x 2350 x 2500 | 4300 |
| LHVR625 | 2500 | 6 / 8 | 4 / 6 | 1’45” | 0.5-3“ | 28-8 | 14 | 8500 | 15 | 3400 x 2350 x 2500 | 6200 |
| LHVR630 | 3000 | 6 / 8 | 4 / 6 | 1’45” | 0.5-3“ | 24-6 | 16 | 10800 | 15 | 4000 x 2200 x 2500 | 7000 |
| LHVR640 | 4000 | 6 / 8 | 4 / 6 | 2” | 0.5-3“ | 24-6 | 20 | 13600 | 20 | 5100 x 2700 x 2800 | 8400 |
| LHVR815 | 1500 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 22-10 | 9 | 10500 | 15 | 2250 x 2600 x 2650 | 5000 |
| LHVR820 | 2000 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 18-8 | 11 | 12500 | 15 | 2750 x 2600 x 2650 | 5500 |
| LHVR825 | 2500 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 24-8 | 14 | 16300 | 20 | 3500 x 2600 x 2650 | 6800 |
| LHVR830 | 3000 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 20-6 | 16 | 18500 | 20 | 4200 x 2600 x 2650 | 7700 |
| LHVR840 | 4000 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 20-8 | 20 | 23000 | 25 | 5200 x 2900 x 2800 | 13500 |
| LHVR1015 | 1500 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 20-10 | 9 | 10500 | 15 | 2250 x 2650 x 2700 | 5500 |
| LHVR1020 | 2000 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 18-8 | 11 | 12600 | 15 | 2750 x 2650 x 2700 | 6000 |
| LHVR1025 | 2500 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 24-8 | 14 | 17500 | 20 | 3600 x 2650 x 2700 | 8000 |
| LHVR1030 | 3000 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 20-6 | 16 | 20000 | 20 | 4200 x 2650 x 2700 | 10500 |
| LHVR1040 | 4000 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 18-6 | 20 | 25000 | 30 | 5200 x 2900 x 2900 | 15200 |
| LHVR1320 | 2000 | 13 / 16 | 10 / 13 | 2” | 1-3” | 13-5 | 11 | 16500 | 20 | 2750 x 2650 x 2950 | 7000 |
| LHVR1325 | 2500 | 13 / 16 | 10 / 13 | 2” | 1-3” | 15-10 | 13 | 32000 | 25 | 3600 x 2650 x 2950 | 9600 |
| LHVR1330 | 3000 | 13 / 16 | 10 / 13 | 2” | 1-3” | 12-6 | 16 | 37000 | 25 | 4200 x 2650 x 2950 | 11800 |
| LHVR1340 | 4000 | 13 / 16 | 10 / 13 | 2” | 1-3” | 10-4 | 20 | 22000 | 30 | 5200 x 3000 x 3050 | 17800 |
| LHVR1620 | 2000 | 16 / 20 | 13 / 16 | 2” | 1-3” | 13-7 | 11 | 20000 | 25 | 2750 x 2950 x 3150 | 12000 |
| LHVR1625 | 2500 | 16 / 20 | 13 / 16 | 2” | 1-3” | 15-8 | 13 | 40000 | 30 | 3600 x 2950 x 3150 | 12000 |
| LHVR1630 | 3000 | 16 / 20 | 13 / 16 | 2” | 1-3” | 12-6 | 16 | 43500 | 30 | 4250 x 2950 x 3150 | 15300 |
| LHVR1640 | 4000 | 16 / 20 | 13 / 16 | 2” | 1-3” | 10-4 | 20 | 30000 | 30 | 5200 x 3050 x 3500 | 21500 |
| LHVR2020 | 2000 | 20 / 25 | 16 / 20 | 2” | 1-3” | 16-8 | 11 | 32000 | 40 | 2900 x 2950 x 3150 | 17000 |
| LHVR2025 | 2500 | 20 / 25 | 16 / 20 | 2” | 1-3” | 15-8 | 13 | 48000 | 40 | 3600 x 2950 x 3150 | 18000 |
| LHVR2030 | 3000 | 20 / 25 | 16 / 20 | 2” | 1-3” | 12-6 | 16 | 52000 | 40 | 4250 x 2950 x 3150 | 20000 |
| LHVR2040 | 4000 | 20 / 25 | 16 / 20 | 2” | 1-3” | 10-4 | 20 | 30000 | 50 | 5200 x 3050 x 3500 | 24000 |
Experienced and actual users, keeping in mind most rigorous working environment, designed our machine with extensive calculations of stresses and loads on every component. This has created a robust machine with adequate safety factors and with minimum power requirement. It saves upon the electricity consumption, thus effective running cost.
All components are suitably machined to provide true alignment, which gives a better-finished product. True alignment also enhances the longevity of the machine eliminating breakdown and revenue loss.
Use of Helical gears, which has better load bearing capacity as compared to Spur Gear, which enhances the longevity of the machine eliminating breakdown and revenue loss.
Machine is equipped with dynamically designed support roll system, which arrests the skewing of the machine, which again increases the longevity of the machine eliminating breakdown and revenue loss with a better finished product.
Only maintenance required is oiling at various points.Along with our machine we provide the following test and guarantee certificates
1. Test certificates for the material used.2. Ultrasonic test certificate for the forgings used.3. Guarantee and test certificate for the motor used.4. Guarantee and test certificate for the Gear Box used.5. 12 months warranty for our product
| Description | Model | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| HM-25 | HB-40 | HBH-40 | HB-50 | HBH-50 | HBD-50 | HBD-85 | HBD-120 | HBD-150 | |
| Pipe | 25 x 2 | 35 x 3 | 35 x 3 | 45 x 4 | 45 x 4 | 45 x 4 | 75 x 6 | 100 x 6 | 140 x 5 |
| Round Tube | 32 x 1 | 40 x 2 | 40 x 2 | 50 x 2 | 50 x 2 | 50 x 2 | 85 x 3 | 120 x 3 | 160 x 3 |
| Square Tube | 30 x 1 | 35 x 2 | 35 x 2 | 40 x 2 | 40 x 2 | 40 x 2 | 70 x 3 | 90 x 5 | 100 x 5 |
| Angle Iron | 30 x 3 | 35 x 5 | 35 x 5 | 45 x 6 | 45 x 6 | 45 x 6 | 85 x 6 | 100 x 10 | 120 x 6 |
| Solid Round | 22 | 32 | 32 | 35 | 35 | 35 | 60 | 70 | 80 |
| Solid Square | 19 | 28 | 28 | 35 | 35 | 35 | 50 | 60 | 70 |
| Flat Bar | 50 x 6 | 50 x 10 | 50 x 10 | 60 x 10 | 60 x 10 | 60 x 10 | 80 x 20 | 100 x 20 | 100 x 25 |
| T Shape Angle | 30 x 3 | 35 x 5 | 35 x 5 | 45 x 6 | 45 x 6 | 45 x 6 | 85 x 6 | 100 x 10 | 120 x 6 |
| C Channel | 20 x 10 | 40 x 20 | 40 x 20 | 60 x 30 | 60 x 30 | 60 x 30 | 80 x 45 | 100 x 50 | 125 x 65 |
| Upper Roll Dia. | 100 | 130 | 130 | 150 | 150 | 180 | 250 | 315 | 390 |
| Lower Roll Dia. | 115 | 130 | 130 | 150 | 150 | 180 | 250 | 315 | 390 |
| Roll Adjustment | Manual | Manual | Hydraulic | Manual | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic |
| Pinch | Single | Single | Single | Single | Single | Double | Double | Double | Double |
| Driven Rolls | Two | Two | Two | Two | Two | Two | Two | Three | Three |
| Speed RPM | N.A. | 15 | 15 | 15 | 12 | 11 | 5 | 5 | 3 |
| Power HP | N.A. | 2 | 2 | 3 | 3 | 3 | 5 | 10 | 15 |
| Weight Kgs. | 210 | 370 | 460 | 580 | 690 | 930 | 1620 | ||
Specifications
| FUNCTION | MODEL | PCBB-303ESK | PBBM-303DM | PBBM-503DM |
|---|---|---|---|---|
| Punching | Max. punching force (kn) | 300 | 300KN | 500KN |
| Punching diameter range (mm) | 45750 | 4.3-25mm | 4.3-34mm | |
| Max.thickness(mm) | 12 | 12mm | 16mm | |
| Max.width(mm) | 160 | 150mm | 250mm | |
| Shearing/Cutting | Max.shearing thickness (mm) | 12 | 12mm | 16mm |
| Max.shearing width(mm) | 160 | 150mm | 250mm | |
| Vertical Bending | Max.bending force (kn) | 300 | 300 | 300 |
| Max.width(mm) | 160 | 150mm | 250mm | |
| Max.thickness (mm) | 12 | 12mm | 16mm | |
| Horizontal bending | Max.width(mm) | 100 | 100mm | - |
| Min.angle (degree) | 90 | 90 | 90 | |
| Out dimension | mm | 1780*1380*1420 | ||
| Power | kw | 3x4kw | 3.4 kw | 3.5 kw |
| Weight | kg | 1400kg | ||
| CNC precision | Bending precision | 1 | 1 | 1 |
| Repeat bending precision | 0.3 |
Specifications
| Model | TLPEF 25 | TLPEF 64 | TLPEF 77 |
|---|---|---|---|
| Base Tube Material | Aluminium,Carbon Steel,Copper | Aluminium,Carbon Steel,Copper | Aluminium,Carbon Steel,Copper |
| Base Tube Diameter Range | 7-12 mm | 12-32 mm | 15-45 mm |
| Fin Material | Aluminium/Copper | Aluminium/Copper | Aluminium/Copper |
| Fin Material Thickness | 0.3-0.7 mm | 0.3-0.7 mm | 0.3-0.7 mm |
| Fin Height | 7 mm | 16 mm | 16 mm |
| Finished Fin Tube Outer Diameter | 25 mm | 64 mm | 77 mm |
| Spiral Pitch | 1.8 mm,2 mm,2.1 mm,2.3 mm,2.5 mm,2.8 mm,3 mm,3.2-8.0 mm | 1.8 mm,2 mm,2.1 mm,2.3 mm,2.5 mm,2.8 mm,3 mm,3.2-8.0 mm | 1.8 mm,2 mm,2.1 mm,2.3 mm,2.5 mm,2.8 mm,3 mm,3.2-8.0 mm |
| Max Length of Finished Finned Tube | 15 m | 15 m | 15 m |
| Center Line Height of Main Spindle to Worktable | 345 mm | 345 mm | 345 mm |
| Height of Worktable | 718 mm | 718 mm | 718 mm |
| Output Spindle Rotating Speed | 80 RPM | 100 RPM | 120 RPM |
| Fin Rolling Speed | 0.6 m/min | 0.75 m/min | 0.9 m/min |
| Main Drive Motor Power | 11 Kw | 11 Kw | 11 Kw |
| Coolant Water Pump Motor Power | 0.12 Kw | 0.12 Kw | 0.12 Kw |
| Machine Weight | About 1500 Kg | About 1500 Kg | About 1500 Kg |
| Overall Dimension | 2450x1000x1650 mm | 2450x1000x1650 mm | 2450x1000x1650 mm |
Specifications
| TWO ROLL TYPE | RTD - 25 | RTD - 40 | RTD - 50 | RTD - 80 | RTD - 100 | RTD - 120 |
|---|---|---|---|---|---|---|
| Max.Pitch Can Be Rolled (In Mm) | 2.5 | 3.5 | 4 | 5 | 5.5 | |
| Max.Dia Can Be Rolled in Feed (In Mm) | 25 | 40 | 50 | 80 | 100 | 120 |
| Max.Dia Can Be Through Feed (In Mm) | 18 | 28 | 35 | 40 | 50 | 70 |
| Max. Rolling Length In Feed (In Mm) | 80 | 100 | 150 | 150 | 150 | 150 |
| Max.Rolling Length Through Feed | indefinite | indefinite | indefinite | indefinite | indefinite | indefinite |
| Max.Outer Dia Thread Rolls (In Mm) | 120 | 180 | 180 | 180 | 200 | 220 |
| Spindle Dia (Bore Dia) (In Mm) | 40 | 54 | 54 | 69.85 | 76.2 | 76.2 |
| Max.Width Thread Rolls (In Mm) | 80 | 100 | 140 | 150 | 150 | 150 |
| Max.Rolling Force | 8 Tons | 12Tons | 15Tons | 24Tons | 30Tons | 40Tons |
| Power For Roll Spindles | 3 H.P. 1440 RPM | 5 H.P. 1440 RPM | 7.5 H.P. 1440 RPM | 10 H.P. 1440 RPM | 12.5 H.P. 1440 RPM | 20 H.P. 1440 RPM |
| Power For Hydraulic Pump | 2 H.P./3H.P. 960/1440 RPM | 2 H.P./3H.P.960/1440 RPM | 5 H.P. 960/1440 RPM | 5 H.P./7.5H.P 960/1440 RPM | 5 H.P./7.5H.P 960/1440 RPM | 7.5 H.P.960/1440 RPM |
Specifications
| Model | PVB-15T | PVB-25T | PVB-40T | PVB-50T | PVB-75T |
|---|---|---|---|---|---|
| Bale Size | 12'' X 12'' | 25'' X 19'' | 25'' X 19'' | 30'' X 20'' | 30'' X 20'' |
| Chamber Size | 12'' X 12'' X 45'' | 25'' X 19'' X 54'' | 29'' X 19'' X 60'' | 30'' X 20'' X 62'' | 30'' X 20'' X 70'' |
| Bale Weight | 35 kg To 50 kg | 40 kg To 80 kg | 50 kg To 100 kg | 50 kg To 150 kg | 150 kg To 200 kg |
| Electric Motor | 2 H.P. | 5/7.5 H.P. | 7.5 H.P. | 10 H.P. | 10/15 H.P. |
| Operation Mode | Manual/ Semi-Auto | Manual/ Semi-Auto | Manual/ Semi-Auto | Manual/ Semi-Auto | Manual/ Semi-Auto |
Specifications
| laser Cutting Thickness | Best Cutting Thickness | Max Cutting Thickness |
|---|---|---|
| CS | 8mm | 10mm |
| SS | 5mm | 6mm |
| Aluminium | 2mm | 3mm |
| Copper | 2mm | 3mm |
Specifications
| Model | PHDP160M | PHDP200M | PHDB250M |
|---|---|---|---|
| Clamps | 4 Clamps | 4 Clamps | Clamps |
| Welding Range (mm) | 50,63 ,75,90,110,125 140,160 | 63,75,90,110,125,140 160.180.200 | 63,75,90,110,125,14 160,180.200.225.250 |
| Heating Plate Max Temp | 2700C | ||
| Temp. Deviation Surface | +-500 | ||
| Working Voltage | 220 V 50HZ | ||
| Heating Plate Power | 1.0KW | 1.60KW | 2.0KW |
| Planning Tool Power | -- | -- | 1.0KW |
| -- | -- | 3.0KW | |
| Pressure Adjustable Range | 0.6to3MPa | ||
| Weight | 45 kg / 35 k9 | 55 kg / 45 kg | 90 kg / 60 kg |
Specifications
| Model | PHDP200 | PHDP315 | PHDP355 | PHDP450 | PHDP500 | PHDP630 | PHDP800 | PHDP1000 | PHDP1200 |
|---|---|---|---|---|---|---|---|---|---|
| Welding Range (mm) | 50,63,75,90,110,125,140,160,200 | 9.01E+031 | 1.60E+020 | 280315355400450 | 2.80E+017 | 2.80E+023 | 500560630710800 | 710,800,900,1000 | 800,900,1000,1200 |
| Heating Plate Max. Plate | --- | --- | --- | --- | 2700C | --- | --- | --- | --- |
| Temp. Deviation in Surface | --- | --- | --- | <+-100C | --- | --- | |||
| Presure Adjustable Ranges | --- | 0-6.3MPa | --- | --- | 0-8.0MPa | --- | --- | O-16MPa | |
| Working Voltage | 220 V 50HZ | 220 V 50HZ | 220 V 50HZ | 380/ 50HZ/220V50HZ | 380/ 50HZ/220V50HZ | 380/ 50HZ/220V50HZ | 380/ 50HZ/220V50HZ | 380/ 50HZ/220V50HZ | 380/ 50HZ/220V50HZ |
| Heating Plate Power | 1.80KW | 3.SKW | 3.60KW | 5.38KW | 6.50KW | 9.35KW | 12.5KW | 17.5KW | 21.5KW |
| Planning Tool Power | 1.10KW | 1.10KW | 1.10KW | 1.50KW | 1.50KW | 1.50KW | 2.2KW | 3.0KW | 4.0KW |
| Total Power | 3.65KW | 5.35KW | 5.45KW | 8.38KW | 9.50KW | 12.3SKW | 18.2KW | 24.0KW | 29.5KW |
| Weight | 135 kg | 230 kg | 260 kg | 450 kg | 560 kg | 650 kg | 1400kg | 2600kg | 2800 kg |
| Volume | 0.53M3 | 1.0M3 | 1.1M3 | 2.2M3 | 2.5M3 | 3.2M3 | --- | --- | --- |
Specifications
| MODEL | LTM - 25 | LTM - 40 | LTM -65 |
|---|---|---|---|
| Saddle Movement | 10'' | 13'' | 22'' |
| Spindle Speed Range | 75-140 | 75-140 | 45-90 |
| Number of Spindle Speed | 2 | 2 | 2 |
| Threading Capacity | 1/4'' to 1'' | 3/8'' to 1.1/2'' | 1/2'' to 2.1/2'' |
| Production per Hour | 60-80 | 60-80 | 70-90 |
| H.P. Required | 3 H.P. | 3 H.P. | 7.5 H.P. |
| Lead Screw | Optional | Optional | Optional |
| Weight (KG) Approx. | 900 | 1200 | 1800 |
Specifications
| THREE ROLL TYPE | RD3R-25 | RD3R-50 | RD3R-75 | ||||
|---|---|---|---|---|---|---|---|
| Work Range | Outside Diameter | 10-25 Mm | 3/8''-1'' | 15-50 Mm | 5/8''-2'' | 25-75Mm | 1''-3'' |
| Thread Length in Feed | 38 Mm | 11/2'' | 50 Mm | 2'' | 75Mm | 3'' | |
| Thread Length Through Feed |
Indefinite | Indefinite | Indefinite | Indefinite | Indefinite | Indefinite | |
| Max.Thread Pitch | 0.7-2 Mm | 32-12 TPl | 0.8-3 Mm | 32-8 TPl | 0.8 -6 Mm | 32 - 4 TPl | |
| Roll Dies | Max in Side Dia | 80 | 140 | 160 | |||
| Max Out Side Dia | 28 | 40 | 54 | ||||
| Max. Width | 38 | 50 | 80 | ||||
| Motor 3 Phase AC | For Roll Spindle | 2 H.P. | 5 H.P. | 10 H.P. | |||
| For Hydraulic System | 2 H.P. | 3 H.P. | 5 H.P. | ||||
| J-930(H) | J-930 | J-930(E) | |
| Table Size | 560/255mm | 560/290mm | 560/255mm |
| Up/ down movement of table | 90/3" | 75/3" | 75/3" |
| Cross movement of table | 100/4" | 100/4" | 100/4" |
| Longitudinal movement of table | 305/12" | 305/12" | 305/12" |
| Max. depth of cut | 140/5" | 140/5" | 140/5" |
| Power required hp/rpm | 3/1440" | 2/1440" | 2/1440" |
| App. Weight of machine | 340kg | 400kg | 260kg |
| Model | J-1013 | J-1013 L | J-1018 | J-1018 LL | ||||||
| mm / inch | mm / inch | mm / inch | mm / inch | |||||||
| Surfacing capacity | 330 / 13" | 330 / 13" | 455 / 18" | 455 / 18" | ||||||
| Max planing width | 330 / 13" | 330 / 13" | 455 / 18" | 455 / 18" | ||||||
| Thicknessing capacity | 177 / 7" | 177 / 7" | 177 / 7" | 177 / 7" | ||||||
| Length Of surface Table | 1220 / 48" | 1550 / 61" | 1550 / 61" | 1830 / 72" | ||||||
| Rebating Capacity | 12.5 / 1/2" | 12.5 / 1/2" | 9 / ???" | 9 / ???" | ||||||
| Length Of Thickness Table | 560 / 22" | 710 / 28" | 660 / 26" | 810 / 32" | ||||||
| Min. Length of workpiece for thicknessing | 254 / 10" | 254 / 10" | 254 / 10" | 254 / 10" | ||||||
| Feeding Speed (feet per minute) | 21 | 21 | 21 | 21 | ||||||
| Cutter block diameter | 95 / 3.75" | 95 / 3.75" | 95 / 3.75" | 95 / 3.75" | ||||||
| Cutter block speed- RPM | 4000 | 4000 | 4000 | 4000 | ||||||
| Standard cutter block - code no. | 3B | 3B | 3B-W | 3B-W | ||||||
| Circular saw table size | 610x305 / 24" x 12" | 610x305 / 24" x 12" | 610x305 / 24" x 12" | 610x305 / 24" x 12" | ||||||
| Up/Down movement of Cir.saw table | 75 / 3" | 75 / 3" | 75 / 3" | 75 / 3" | ||||||
| Max.circular saw diameter | 300 / 12" | 300 / 12" | 300 / 12" | 300 / 12" | ||||||
| Power required - HP / RPM | 3 / 1440 | 3 / 1440 | 5 / 1440 | 5 / 1440 | ||||||
| Approx.wt.of machine - kg. | 450 | 475 | 600 | 650 | ||||||
Specifications
| Model | TLPSC20 (Vertical Kenchi Machine) | TLPSC22 (Vertical Kenchi Machine) | TLPSC25 (Vertical Kenchi Machine) | TLPSC 30 Double Gear Vertical Scrape Cutting Machine |
|---|---|---|---|---|
| Blade Size | 20 Inch | 22 Inch | 25 Inch | 30 Inch |
| Blade open size | 75 MM | 90 MM | 110 MM | - |
| Crank Shaft | 1 Nos | 1 Nos | 1 Nos | 3 Nos |
| Steel Gear | 1 Nos | 1 Nos. | 1 Nos | 2 Nos |
| Fly Wheel | 1 Nos. | 1 Nos. | 1 Nos | 1 Nos |
| Gun Metal Bushing | Provided | Provided | Provided | Provided |
| V-Belt | Provided | Provided | Provided | Provided |
| Pulley | Provided | Provided | Provided | Provided |
| Elector Starter | Provided | Provided | Provided | Provided |
| Motor | 7.5 HP 1440 RPM MAKE NBE | 7.5 HP 1440 RPM MAKE NBE | 10 HP 1440 RPM MAKE NBE | 20 HP |
| Quotation Valid | 10 Days. | 10 Days. | 10 Days. | 20 Days. |
| Overall Dimension | 84 (L) x 36 (W) x 140(H) In Inch | 84 (L) x 39 (W) x 143(H) In Inch | 86 (L) x 42 (W) x 150(H) In Inch | - |
| Body Plate | 16mm,20mm,30mm,Fabricated Body | 16mm,20mm,30mm,Fabricated Body | 16mm,20mm,30mm,Fabricated Body | 35mm,45mm, Fabricated Body |
| Machine Weight | 2100 klg aporrox | 2300 klg aporrox | 2600 klg aporrox | 10.5 Ton Approx. |
| Delivery Time | Working 25 Days | Working 25 Days | Working 25 Days | Working 60 Days |
Specifications
| Model | PHB 16 | PHB 20 | PHB 24 (TRIPLE ACTION JUMBO) |
|---|---|---|---|
| Baling Chamber | 25''X16''X52''(HXWXL) | 29'' X 20'' X 52''(HXWXL) | 28X25X58 H X W X L |
| Bale Size | 16'' X 16'' X (H X W X) | 20'' X 20'' X (H X W X) | - |
| Electric Motor | 15 H.P 3 PHASE 1440 RPM | 20 H.P 3 PHASE 1440 PM(Cromption Motor) |
30H.P 3PHASE 1440 RPM |
| Body | FABRICATED (45 + 12 MM) | FABRICATED (45 + 12 MM) | ABRICATED (50 + 12 MM) |
| Oil Drive | VAN PUMP SYSTEMS. | VAN PUMP SYSTEMS. | VAN PUMP SYSTEMS. |
| Working Liquid | HYDRO/ENCLO-68 (NOT IN OUR SCOPE) |
HYDRO/ENCLO-68(NOT IN OUR SCOPE) | Hydro/Enclo-68(Not in Our Scope) |
| No of Cylinder | 2 Nos./4Nos for auto eject | 2 Nos. / 4 Nos for auto eject | 5nos |
| Force on Lid | 40 Tons | 40 TONS | 50 TONS |
| Force on Main Cylinder | 80 Tons | 100 TONS | 120 TONS |
| Bale Ejection | By Cylinder | By Cylinder | By Cylinder |
| Door Lock | By MANUAL / HYD FOR AUTO MODEL | By MANUAL/HYD FOR AUTO MODEL |
Auto |
| Working Pressure | 3000 PSI | 3000 PSI | - |
| Hard Liner Plates | PROVIDED | PROVIDED | PROVIDED |
| Starter | OPTIONAL | PROVIDED | PROVIDED |
| Weight of the Bale | 25 TO 40 KG. | 70 KG. | - |
| Idle Cycle Time | 50-55 SECONDS | 50 -55 SECONDS | - |
| Oil Tank Capacity | 400 LTS. | 500 LTS | - |
| Opertion of the Machine | MANUAL THROUGH LEVERS |
MANUAL THROUGH LEVERS | - |
Specifications
| Model | PVB-15T | PVB-25T | PVB-40T | PVB-50T | PVB-75T |
|---|---|---|---|---|---|
| Bale Size | 12'' X 12'' | 25'' X 19'' | 25'' X 19'' | 30'' X 20'' | 30'' X 20'' |
| Chamber Size | 12'' X 12'' X 45'' | 25'' X 19'' X 54'' | 29'' X 19'' X 60'' | 30'' X 20'' X 62'' | 30'' X 20'' X 70'' |
| Bale Weight | 35 kg To 50 kg | 40 kg To 80 kg | 50 kg To 100 kg | 50 kg To 150 kg | 150 kg To 200 kg |
| Electric Motor | 2 H.P. | 5/7.5 H.P. | 7.5 H.P. | 10 H.P. | 10/15 H.P. |
| Operation Mode | Manual/ Semi-Auto | Manual/ Semi-Auto | Manual/ Semi-Auto | Manual/ Semi-Auto | Manual/ Semi-Auto |
