Scalping and Cylindrical Cutters are manufactured from 6" dia to 8" dia & length from 16" to 20" in light & heavy duty.These are used for scalping copper & brass strips. Material used is imported high speed steel in M2 & M35 grade.more...
Scalping and Cylindrical Cutters are manufactured from 6" dia to 8" dia & length from 16" to 20" in light & heavy duty.These are used for scalping copper & brass strips. Material used is imported high speed steel in M2 & M35 grade. more...
Usage : For light and heavy deep slot operations in steel and in most soft materials.
Condition : Good
Min. Order Quantity : As per Client Requirement
Product Name : Side and Face Cutter
Our side and face cuter are supplied in straight and staggered tooth form for light and heavy deep slot operations in steel and in most soft materials. Our high speed steel cutters with straight and staggered tooth have made us a reputed side cutter manufacturer. The high acceptamore...
Usage : Used for surface cutting and finishing in all types of materials.
The High Speed Cylindrical Cutter is used for surface cutting and finishing in all types of materials. Furnished with right or left hand cut, 30 Helix. These are High Speed Steel Light and heavy duty Cylindrical / Plain Milling Cutters. Our High Speed Cylindrical Cutter has a hugmore...
Material : These Cutters are used for face and slab milling in all types of materials.
These Cutters are used for face and slab milling in all types of materials. Furnished with 30 0 Helix right or left hand cut in High Speed Steel.more...
Cylindrical milling cutters are best suited for areas requiring high rate of stock removal. Their teeth are on the peripheral and produce flat surfaces that are parallel to the rotation axis. They are ideal for transferring profiles using several step actions. The need to regrindmore...
Side-and-face cutters are designed with cutting teeth on their sides as well as circumference. They are made in varying diameters and widths depending on the application. The teeth on the side allow the cutters to make unbalanced cuts (cutting on one side only) without deflectingmore...
Our distinguished clients highly appreciate us as a Manufacturer, Supplier and Exporter of Cylindrical Milling Cutters . These profile-sharpened Cylindrical Milling Cutters have teeth on peripheral surface only. Cylindrical Milling Cutters confirm to: IS 6309-1982. The relativelymore...
Side & face cutters are milling cutters. Side & face cutters are profile-sharpened cutters with peripheral teeth and sometimes with teeth on both sides. The side & face cutters are used on horizontal milling machine to mill shoulders, slots, small-width surface, etc. We are amongmore...
The Face Cutter is particular types of cutting tool which has its specific uses in the industries. The Side & Face Cutter is made of the best quality material ensuring durability. Manufactured in the latest technology, the Face Cutter offered by us highly efficient. We are rated more...
The Face Cutter is particular types of cutting tool which has its specific uses in the industries. The Side & Face Cutter is made of the best quality material ensuring durability. Manufactured in the latest technology, the Face Cutter offered by us highly efficient. We are rated more...
With a diameter ranging from ¼-2”, the range of the Back Spot Face Cutters is ideal for cutting purposes. The company has been counted amidst the leading Manufacturers, Exporters and Suppliers of the Back Spot Face Cutters and the range is available from 10mm - 80mm more...
The hallmark of the Side and Face Cutter is the presence of the cutting teeth on the sides as well as the entire circumference of the cutter. The teeth of the Side and Face Cutter can be straight as well as staggered with the width ranging from 4-22 mm and the diameter being betwmore...
These cutters are used on conventional or special purpose milling machines of various capacities to machine metal during manufacturing of dies & moulds, automobile components, etc. We offer these cutters in: HSS (High Speed Steel) standard/special grade- M2, M35, M42, more...
SHB Manufacture Straight Teeth & Staggered Teeth Side & Face Cutters in HSS M-2 & M-35 material as per BS-122-1-1953 and IS : 6308-1982. Side & Face Cutters are available in the following sizes: STRAIGHT TEETH Dimensions Dia Width Bore mm 50-200 3-32 16-40 inch 2½-8 1/8-1¼ 1-1-more...
We provide a large range of high efficacy milling cutter that includes hob cutters and relieved cutters. Today, we stand among the chief relieved cutter manufacturers and hob cutters suppliers, based in india. Our milling cutter is manufactured from the optimum quality raw materimore...
We are offering face cutter designed with strip land and tooth form to give strength and more chip clearance. Special note is to be taken of the form at the back of the teeth which gives greater support to the cutting edge. The cutters are well adapted for a wide variety of produmore...
Cylindrical milling cutters are profile sharpened cutters having teeth on peripheral surface only. Cylindrical milling cutters produce relatively flat surface parallel to axis of rotation and are ideal for application that required high rate of stock removal. Having no side teethmore...
Angle cutters (single angle cutters and double or equal angle cutters) are milling cutters with their cutting face angled with respect to the axis of rotation. There are two types of angle cutters that we manufacture and stock which are the single angle cutters and double (equal)more...
We take pleasure to introduce ourselves as one of the renowned firms for providing the best-in-class range of Face Milling Cutter. Features: Rust resistance Durable Precisely designed Basic Parameters: Type : Type A Staggered Teeth and Type B Straight Teeth Diameter Range : more...
With our expertise and trustworthiness, we are engaged in offering an optimum quality range of Angle Milling Cutter. Basic Parameters: Angle Type : Single Angle, Double Angle, Equal Angle, Double Unequal Angle Degree range : 10 Deg to 90 Deg Diameter range : 50 mm to more...
Keeping in mind ever-evolving requirements of our respected clients, we are offering a premium quality range of Cylindrical Milling Cutter. Features: Optimum strength Easy to install Rugged design Basic Parameters: Diameter Range : 40 mm to 200 MM Length Range : 50 mm to 200more...
* These Cutters are used for face and slab milling in all types of materials. * Furnished with 300 Helix right or left hand cut in High Speed Steel. more...
Designed with strip land and tooth form to give strength and more chip clearance. Special note is to be taken of the form at the back of the teeth which gives greater support to the cutting edge. The cutters are well adapted for a wide variety of production operations and are commore...
Angle Cutters (Single Angle Cutters and Double or Equal Angle Cutters) are milling cutters with their cutting face angled with respect to the axis of rotation. There are two types of angle cutters that we manufacture and stock which are the Single Angle Cutters and Double (Equal)more...
Cylindrical milling cutters are profile sharpened cutters having teeth on peripheral surface only. cylindrical milling cutters produce relatively flat surface parallel to axis of rotation and are ideal for application that required high rate of stock removal. Having no side teethmore...
Double Equal Angle Milling Cuttersas per Iss : Diameter : 50 Mm to 100 Mm Angle : 450, 600 & 900width : 10 Mm to 28 Mm as per Bss : Diameter : 2.3/4" & 3" Angle : 300, 400, 450, 600 & 900width : 5/16" to 5/8" more...
Diameter: 6" to 8" Length: 16" to 22" These cutters are used to scalping copper & brass strips. Material used is High Speed Steel Imported ( M-2/ M-35) grade. more...
Single Angle Milling Cutters as per Iss : Diameter : 50 Mm to 100 Mm Angle : 450, 60 0, 65 0, 70 0, 75 0, 80 0width : 12 Mm to 36 Mm as per Bss : Diameter : 2.3/4" to 3" Angle : 300, 40 0, 45 0, 50 0, 60 0, 70 0, 80 0width : 5/16" to 5/8" more...