PAYPER BAGGING INDIA PVT LTD Pune, Maharashtra

The provided solution is assured to be the best pneumatic conveying system solution for the application. Being the application experts & pneumatic conveying system manufacturer, we always assure to deliver best of both the worlds (commercial & technical worlds).

The pneumatic conveying is necessarily custom made conveying system & based on product characteristics, particle size, throughput capacity, number of sources and number of destinations. Dilute phase is a suspension flow wherein the material to be conveyed is introduced into a moving air stream inside a pipeline. FEATURES The dilute phase conveying system uses low-pressure air at pressures less than one bar in case of pressure conveying and (-) 5000 mm in case of vacuum convening, which is generated by positive displacement type roots blowers or by centrifugal blowers For the material to remain in suspension there is a minimum conveying velocity which varies for different materials. The quantity of material that is fed into an air stream is also dependent on material characteristics like bulk density, particle size, sieve analysis, frequency distribution etc Generally, the material to air ratio varies between 3 to 10 kg of material to kg. of air Conveying velocities are in the range of 18 to 28 m/sec depending on the product characteristics

INDPRO’s SWEET SCRUB  is a revolutionary design to achieve consistency in sticky products such as Sugar. SWEET SCRUB TM  is a unique cyclone & scrubber design ensures that sugar does not stick to it and is separated effectively. FEATURES Dilute Phase pressure conveying Up to 15 TPH capacity Up to 30 meter (100ft) conveying distance All SS 304 construction Internal mirror finish Noise reduction blower (Optional) CIP enabled Minimum downtime No Sticking, No Choking, No Product loss Minimum suspended particle discharge Additional safety equipment not required

Pneumatic Bulk Container Loaders provide the ability to make a 90 degree transfer of the product from a low clearance silo into the back of a marine shipping container. They load in a very clean way pellets, granules and powders. FEATURES The complete system consists starting from the upstream end: a rotary valve feeder attached to the discharge spout of the silo that doses the product into a conveying lance under positive pressure created by a blower package upstream. The air is clean and dry If the pneumatic system is the Dilute Phase type, the air is conveyed at high velocity and low pressure, therefore the pellets, granules or powders enter the bulk container liner at high velocity but in small amounts If the pneumatic system is the Dense Phase type, the air is conveyed at high pressure but low speed, therefore the pellets, granules or powders enter the bulk container liner at low speed but in big quantity batches. This method is much faster than the dilute phase system but requires high pneumatic pressure availability For powder type products, the bulk container liner is equipped with a ventilation port that returns the dust to a bag/filter house in a closed loop system Pneumatic Bulk Loading systems achieve a high usage of the container payload volume but they are high energy users Ideal to be installed under silos with low clearance Dilute Phase (Low pressure/High Velocity) or Dense Phase (High Pressure/Low Velocity) Best fit for pellets, granules and powders that require maximum cleanliness High efficiency in container volume usage Consists of rotary valve feeder, conveying lance, blower package, compressor, air dryer and dust collection system if applicable

Indpro Destoner comes to rescue, for efficient removal of high-density matter from grains. The contamination can be stones, metallic particles, glass etc.   PROCESS The product fed through an air shut-off gate after preliminary cleaning by gravity The product passes on to an inclined oscillating deck. The deck is designed as screen; through which an upward current of air is passed with the help of a blower. This results in fluidizing the product Due to their different specific gravities, the heavy particles such as stones sink to the bottom of this layer of fluidized material, while the lighter particles supported by the cushion of air, float on top The oscillating action of the screen causes the heavy particles to work their way to the upper end of the deck There is an adjustable counter of air, this causes the final separation of heavy particles from light material and the stone discharged The throughput capacity vary according to product to be handled and contamination. Variety of products can be handled – Rice, Wheat, Millets, Sorghum, Barley, Malt etc. Typically the capacity ranges from 8 TPH to 20 TPH The air volume can be adjusted to achieve the optimal degree of separation

THE BAG-EMPTYING MACHINE is designed for emptying paper, paper and polythene and polythene and raffia bags containing products in powder or granules. Depending on the customer's requirements, the bags can be sent to the emptying machine by means of a conveyor belt, a vertical elevator or an automatic depalletiser.   features The bags are crushed by two contrasting rollers or cut open by blades. A rotating drum then enables the bag to be separated completely from the product The product is transferred by means of the vibrating hopper or the screw feeder at the bottom of the machine to the process or to another delivery system The empty bags are sent to the collection chamber, which can be equipped with a screw-press accessory designed for reducing the volume of the bags. Capacity: 150/300/600 bags/hr