Indpro Ventury Educator is a static device without any moving parts, which injects solids in high pressure gas for onward pneumatic conveying.

FEATURES

• High pressure gas passes through the sonic nozzle were sonic velocity is reached
• Low pressure gas gets sucked through solids feed inlet due to low pressure created ahead of sonic nozzle
• Solids and secondary gas get accelerated & mixing takes place in the mixing zone, gas velocity in this zone is high
• Expander/diffuser provided converts this velocity pressure into static pressure at the outlet
• The injector entrains only that much quantity of solids & secondary gas which Venturi Injector and downstream equipment can handle, it is therefore a self-regulating device
• Venturi Injector always works at systems maximum rated capacity
• The Venturi nozzle and, when coupled with a high-pressure blower, is the primary source of motive power for a trim / material conveying system
• The educator allows for movement of material in continuous form (edge trimmings) and without any moving components in the conveying air stream

Indpro have launched revolutionary wet spent grains conveyors have been especially designed for the modern brewery and allow reliable transport from the lauter tub or mash filter to the silo plant.

FEATURES

• Indpro systems are simple yet efficient systems that help you get rid of your spent grain
• Indpro has the best solutions for wet spent grain conveyors, dryers and silo systems
• The new generation of Indpro spent grain conveyors are designed for the modern brewery
• These systems meet todays demands for operational safety, low air consumption, easy cleaning and maintenance
• We design a complete spent grain removal system that suites your needs
• Indpro spent conveyors operate on the principle that spent grain enters the conveyor through the top, is compressed by a screw, and then pushed through the spent grain piping pneumatically
• They offer a simple, quiet and efficient way to convey spent grain

Indpro Closed Loop Conveying (ICLC) System is the ideal method of pneumatically conveying hygroscopic, sterile, perishable and hazardous products such as Chemicals, sugar, starch, potato / milk powder and oxidising powders, Chemicals, where product exposure to unconditioned gas can cause product degradation and introduce material handling problems. Same system can cater to products that are sensitive to contamination, application such as baby food, pharmaceutical industry, highly explosive material etc.

FEATURES

Sealed System :

• No airborne contaminants
• Contained emissions
• Clean enclosed method of conveying
• Re-circulating gas = Economic Dry Air Conveying
• Economic inert Gas Conveying
• Multiple destinations & single common filter

Nitrogen / Inert Gas Conveying :

• Hazardous products transported safely
• Explosion panels and venting eliminated
• Economic conveying by recirculation minimal gas usage

Dry Air Conveying :

• No caking/agglomerating
• Microbiological growth inhibited ideal for food products
• Product stays in good condition dry & free flowing
• Reduced maintenance & cleaning
• No condensation or need to lag/insulate pipes
• Improved filter performance
• Sterile Air Conveying
• HEPA filtered air is introduced to the system to ensure biological contamination is eliminated

Tubular Screw Conveyors and Feeders are manufactured from carbon steel with suitable surface finishing. They consist of a tubular trough equipped with at least one inlet and outlet spout, a welded flange at each tube end, helicoid screw flighting welded on a Centre pipe with a coupling bush at each end, two end bearing assemblies complete with self-adjusting shaft seal, a number of intermediate hanger bearings depending on the overall length of the screw conveyor.

FEATURES

• Tubular Screw Conveyors are equipped with a gear motor appropriate for the application
• The modular TU Tubular Screw Conveyor and Feeder system is highly versatile offering a variety of standard solutions for handling of powdery or granular materials

SPECIFICATIONS

• TU Tubular Screw Conveyors come in a medium heavy-duty design only
• TU Screw Conveyors are available with ATEX, Zone 22 certification
• Depending on the characteristics of the material, different models of conveyors or feeders are available in applications such as concrete production (for fly-ash, filler dust, silica fume), premixed building materials (dry plasters, sand, cement, additives), glass processing (calcium carbonate, soda, sand, etc.), foundries (sand, bentonite), and many others

The Pneumatic Conveying is necessarily custom made conveying system & based on product characteristics, particle size, throughput capacity, number of sources and number of destinations. Each pneumatic conveying system is designed & customized as per the application popularly known as custom conveyor system.

Dense Phase Conveying System is recommended for conveying high capacity for longer distances normally at lower speeds and a material to the ratio as high as 8 times of Dilute Phase Systems. The operating pressure of the system is generally higher. These systems operate below minimum suspension velocity and the materials move along the bottom of the pipe. We have a wide range of dense phase transporter that is designed as per the accepted industry standard and is widely used across various industries. High on reliability and durability, these can also be fabricated as per the specific requirements of our clients.

Indpro Ventury Educator is a static device without any moving parts, which injects solids in high pressure gas for onward pneumatic conveying.

FEATURES

• High pressure gas passes through the sonic nozzle were sonic velocity is reached
• Low pressure gas gets sucked through solids feed inlet due to low pressure created ahead of sonic nozzle
• Solids and secondary gas get accelerated & mixing takes place in the mixing zone, gas velocity in this zone is high
• Expander/diffuser provided converts this velocity pressure into static pressure at the outlet
• The injector entrains only that much quantity of solids & secondary gas which Venturi Injector and downstream equipment can handle, it is therefore a self-regulating device
• Venturi Injector always works at systems maximum rated capacity
• The Venturi nozzle and, when coupled with a high-pressure blower, is the primary source of motive power for a trim / material conveying system
• The educator allows for movement of material in continuous form (edge trimmings) and without any moving components in the conveying air stream

Indpro have launched revolutionary wet spent grains conveyors have been especially designed for the modern brewery and allow reliable transport from the lauter tub or mash filter to the silo plant.

FEATURES

• Indpro systems are simple yet efficient systems that help you get rid of your spent grain
• Indpro has the best solutions for wet spent grain conveyors, dryers and silo systems
• The new generation of Indpro spent grain conveyors are designed for the modern brewery
• These systems meet todays demands for operational safety, low air consumption, easy cleaning and maintenance
• We design a complete spent grain removal system that suites your needs
• Indpro spent conveyors operate on the principle that spent grain enters the conveyor through the top, is compressed by a screw, and then pushed through the spent grain piping pneumatically
• They offer a simple, quiet and efficient way to convey spent grain

Indpro Closed Loop Conveying (ICLC) System is the ideal method of pneumatically conveying hygroscopic, sterile, perishable and hazardous products such as Chemicals, sugar, starch, potato / milk powder and oxidising powders, Chemicals, where product exposure to unconditioned gas can cause product degradation and introduce material handling problems. Same system can cater to products that are sensitive to contamination, application such as baby food, pharmaceutical industry, highly explosive material etc.

FEATURES

Sealed System :

• No airborne contaminants
• Contained emissions
• Clean enclosed method of conveying
• Re-circulating gas = Economic Dry Air Conveying
• Economic inert Gas Conveying
• Multiple destinations & single common filter

Nitrogen / Inert Gas Conveying :

• Hazardous products transported safely
• Explosion panels and venting eliminated
• Economic conveying by recirculation minimal gas usage

Dry Air Conveying :

• No caking/agglomerating
• Microbiological growth inhibited ideal for food products
• Product stays in good condition dry & free flowing
• Reduced maintenance & cleaning
• No condensation or need to lag/insulate pipes
• Improved filter performance
• Sterile Air Conveying
• HEPA filtered air is introduced to the system to ensure biological contamination is eliminated

Tubular Screw Conveyors and Feeders are manufactured from carbon steel with suitable surface finishing. They consist of a tubular trough equipped with at least one inlet and outlet spout, a welded flange at each tube end, helicoid screw flighting welded on a Centre pipe with a coupling bush at each end, two end bearing assemblies complete with self-adjusting shaft seal, a number of intermediate hanger bearings depending on the overall length of the screw conveyor.

FEATURES

• Tubular Screw Conveyors are equipped with a gear motor appropriate for the application
• The modular TU Tubular Screw Conveyor and Feeder system is highly versatile offering a variety of standard solutions for handling of powdery or granular materials

SPECIFICATIONS

• TU Tubular Screw Conveyors come in a medium heavy-duty design only
• TU Screw Conveyors are available with ATEX, Zone 22 certification
• Depending on the characteristics of the material, different models of conveyors or feeders are available in applications such as concrete production (for fly-ash, filler dust, silica fume), premixed building materials (dry plasters, sand, cement, additives), glass processing (calcium carbonate, soda, sand, etc.), foundries (sand, bentonite), and many others

The Pneumatic Conveying is necessarily custom made conveying system & based on product characteristics, particle size, throughput capacity, number of sources and number of destinations. Each pneumatic conveying system is designed & customized as per the application popularly known as custom conveyor system.

Dense Phase Conveying System is recommended for conveying high capacity for longer distances normally at lower speeds and a material to the ratio as high as 8 times of Dilute Phase Systems. The operating pressure of the system is generally higher. These systems operate below minimum suspension velocity and the materials move along the bottom of the pipe. We have a wide range of dense phase transporter that is designed as per the accepted industry standard and is widely used across various industries. High on reliability and durability, these can also be fabricated as per the specific requirements of our clients.