Mumbai, Maharashtra, India
Our Products
The Gantry Type also known as the X-Y type milling machine is the most versatile, advanced and heavy duty portable milling machine by Pelican. It is very similar to a conventional Plano miller just that it is also portable and in this case the milling spindle travels instead of the job. This machine consists of 2 long travel beds and 2 cross travel beds, both equipped with preloaded linear bearings, as found in the latest and most advanced CNC machines. A twin motor rack and pinion mechanism for long and cross travel along with the help of the linear bearings ensures a smooth and high feed rate, hence increasing the material removal rate tremendously.
The design is rugged and heavy duty, yet portable. The whole machine is transported in parts and assembled on site. The machining capacity can be adjusted as the various beds for long travel and cross travel are interchangeable and made in various lengths. Beds are available in sets of 2 and the lengths are of 1, 2, 3 and 4 metres each. So you can have a gantry size of2 metres x 4 metres or even 6 metres x 3 metres as required.
A high capacity milling spindle is powered by a heavy duty Hydraulic motor and power pack which enables it to be equipped with a 400 dia milling cutter if need be. Standard milling cutter is a 200 mm dia cutter. High feed rates and large depth of cut helps remove material stock as fast as conventional machines.
The Internal Type Keyway Milling machine is for machining keyways inside Bores. The machine is mounted on an internal expansion chuck assembly which can be adjusted as per the inner diameter of the bore. Reference can be taken from the same bore or any external reference too.
It can be used to create a flat surface, slots, pockets and keyways. The machine is equipped with a small dia end mill, which is generally electrically driven, but pneumatic and hydraulic drive options can also be made available. The linear travel can be manual or auto, as desired.
The machines are compact and can be mounted on any part along the axis of the shaft as desired. It can also be mounted at an angle to mill multiple keyways, maintaining the certain angle with respect to each other. The machine can be mounted taking reference form the existing machined surface or even independent of it, as required.
The linear milling machine is generally used for very long milling operations like in case of Dam Gates Slides. In this machine the X axis consists of milling beds in segments of 750 mm as standard and multiple such beds can be joined together to create infinite lengths. The X axis hence is infinite. The standard Y axis and Z axis is 200 mm and 300 mm respectively. As this machine, like every other machine of ours, is custom built; the Y and Z axis feed also can be changed to a certain extent. The standard machine can perform operations such as face milling, shoulder milling, end milling, grooving and drilling. The X axis, long travel, is electrically driven using a feed screw mechanism.
The Low Profile milling machine is similar to the Linear Type Milling machine, but is mainly used in locations with confined space. This was developed on a need of the hour basis, for machining the engine mounting bed of a Ship. Due to the confined space a Low Profile (Stub Type) machine was required. The standard machine can perform operations such as face milling, shoulder milling, end milling, grooving and drilling.
This type of milling machine is very compact and light weight. It is designed for groove milling and has smaller X axis length capacity, generally the X axis is 1 to 1.5 metres. It can be mounted in any orientation, be it vertical, horizontal or inclined. It is designed for using endmills as the primary tool with a maximum cutter dia. capacity of 30 mm. It is best suited for onsite machining of gasket grooves in end flanges of tubesheets.
