Our Products
We are leaders in the market for providing best range of Stone Aggregate and Silica Sand
| Sr No | Parametrs | Unit | Result Obtained | Requirements |
| 1 | Water Absorbtion | % | 0.73 | |
| 2 | Specefic Gravity | % | 2.84 | |
| 3 | Impact Value | % | 11.73 | shall be <45% |
| 4 | Crushing Value | % | 13.45 | shall be <45% |
| 5 | Abrasion Value | % | 14.34 | shall be <45% |
| 6 | Oranic Impurties | % | NIL | |
| 7 | Deletrious Material | % | 0.84 | Max 5% |
| 8 | Soundness Material% | % | 1.79 | Max 18% |
| 9 | Sulphate (as SO3) | % | 0.0126 | |
| 10 | Chlorides as Cl | % | 0.023 | 0.6 kg/m3 in RCC |
| 12 | Flakiness Index | % | 13.13 | COMBINED SHALL BE <30% AS PER North |
| 13 | Elongation Index | % | 15.35 |
| Sr No | Sieve Size | % Passing | Requirements |
| 1 | 90.MM | 100 | 100 |
| 2 | 63.0 MM | 93.45 | 90-100 |
| 3 | 53.0 MM | 45.32 | 25-75 |
| 4 | 45 .0MM | 0.06 | 0-15 |
| 5 | 22.94MM | 0 | 0-5 |
Download Table
Test report of AGGREGATE 10MM.
| Sr No | Parametrs | Unit | Result Obtained | Requirements |
| 1 | Water Absorbtion | % | 0.73 | |
| 2 | Specefic Gravity | % | 2.84 | |
| 3 | Impact Value | % | 11.73 | shall be <45% |
| 4 | Crushing Value | % | 13.45 | shall be <45% |
| 5 | Abrasion Value | % | 14.34 | shall be <45% |
| 6 | Oranic Impurties | % | NIL | |
| 7 | Deletrious Material | % | 0.84 | Max 5% |
| 8 | Soundness Material% | % | 1.79 | Max 18% |
| 9 | Sulphate (as SO3) | % | 0.0126 | |
| 10 | Chlorides as Cl | % | 0.023 | 0.6 kg/m3 in RCC |
| 12 | Flakiness Index | % | 13.13 | COMBINED SHALL BE <30% AS PER North |
| 13 | Elongation Index | % | 15.35 |
| Sr No | Sieve Size | % Passing | Requirements |
| 1 | 12.5MM | 100 | 100 |
| 2 | 10.0 MM | 93.45 | 85-100 |
| 3 | 4.75 MM | 13.45 | 0-20 |
| 4 | 2.36 | 0.1 | 0-5 |
| SR. No. | TEST PARAMERETS | TEST RESULTS |
| 1 | Silica as Sio2 % | >99.20 |
| 2 | Alumina as A12O3 % | 0.30-0.40 |
| 3 | Iron as Fe2O3, % | <0.03 |
| 4 | Moisture. % | 4-5 |
Physical Screening Test :
| SR. No. | TEST NAME | TEST LIMITS |
| 1 | +30 MESH, % | <5.0 |
| 2 | -120 MESH, % | 2-3 |
| Sr No | Parametrs | Unit | Test Limits |
| 1 | Silica as SiO2 | % | 98.7 to 99.2 |
| 2 | Iron as Fe2O3 | % | 0.05 to 0.07 |
| 3 | Aluminia as AL2O3 | % | 0.25 to 0.35 |
| 4 | Fraction retained on 52 mesh | % | 0.2-0.3 |
| 5 | Fraction retained on 120 mesh | % | 99.5 -99.8 |
| 6 | Fraction retained on 200 mesh | % | 0.05-0.10 |
| 7 | AFS | % | 65-70 |