Our Products
We are offering Polykonium (Benzalkonium Chloride Solution) to the clients. Polykonium contains Benzalkonium chloride 5% complexed with Nonyl Phenol Ethoxylate, perfume, and color Q.S. Polykonium also known as Alkyl Dimethyl Benzyl Ammonium Chloride is a Quarternary Ammonium Compound with exceptional microbial properties when used as a disinfectant sanitizer, deodorant, germicide and algicide. Polykonium has many uses in various fields. Nonyl Phenol Ethoxylate increases the dispersion of Benzalkonium Chloride as well as its effectiveness against most commonly found bacteria. Nonyl Phenol Ethoxylate also increases the detergent properties of Benzalkonium Chloride. This powerful combination makes Polykonium a very potent and effective germicidal and antiseptic solution.
Attributes :
Applications :
Method of Application for Cooling Towers :
Advantages :
Polycide (Dichlorophene Biocide) is a unique formulation based on conjugated phenolic compound with Dichlorophene (5.5 dichloro, 2.2 dihydroxy, diphenylmethane) as an active ingredient. It is recommended for the control of slime, algae in all types of water-systems and humid atmosphere. Its dispersion property helps in excellent distribution of active content in the slimy masses and water systems. Polycide is effective over wide range of pH higher than 7.5 when other biocides lose their activity. Polycide is an exceptionally broad-spectrum biocide with powerful bactericidal, fungicidal and algicidal activity. It is active against organisms found in vegetative growth in water-cooling systems and other places. The organisms consist of algae such as yellow, green, bullish green and brown; the fungi such as Aspergillus niger, Ascomycetes, Basidiomycetes and Bacteria such as S. Typhae, S-Aureus etc. It acts against the cell wall and protoplasm of the organism and arrest the bioactivity. Polycide contains ingredients, which are stable and effective in the presence of extraneous organic matter. Less than 60 parts per million (ppm) concentration of Polycide control many of the organisms normally found in industrial waters.
All in one (bactericidal, fungicidal and algicidal properties) :
Physical Properties :
Use of Polycide :
Industrial Application :
The biocidal property of Polycide is very useful in preventing the undesired and harmful growth of algae, fungi and bacteria in various process industries such as breweries, distilleries, baking, confectionery and food processing. It is also used in the preservation of industrial products, such as textile, paper, leather and paint.
Method of Application – Dilution for Use :Polycide is water miscible product. It can be directly added to cooling water systems and air-conditioning plants to control the growth of algae, fungi and other microorganisms in water. For general sanitation of premises and equipment of baking, confectionery, food processing, brewing and distilleries, dilute solution of Polycide is advised to be used for spraying / rinsing the surface and equipment. For preserving industrial products dilute solution to be used for coating / impregnation of the finished products.
Dosages :
Water Cooling and Air Conditioning Systems :The water ambient temperature in cooling system serves a good habitat for algae and fungi. The micellium along with other entrapped matters from gelatinous ‘slime’. The slime formation chokes the flow of water thereby decreasing the heat transfer capacity of the heat exchanger. Polycide can be mixed with water in circulating systems. To prevent slime formation, it acts as Slimicide.
Municipal Authorities :To maintain hygienic condition and to prevent infectious diseases, control of bacterial growth in public was house and swimming pools are necessary. Polycide can be added for this purpose and sanitizing water bodies.
Breweries and Distilleries :These industries face difficult problem in controlling the growth of bacteria, fungi, algae at various places such as: fermenters, storage tanks, pasteurizers, bottle washing plants particularly in distilleries. Ethyl Alcohol is manufactured by fermentation process of molassess with the help of Yeast. However, the molassess solution contains variety of sacharides, which get converted into organic compound other than Ethyl Alcohol due to bio-oxidation by bacteria present in the molassess solution. This cuts down the yield of alcohol. Polycide can be used to control / prevent the growth of bacteria to improve the yield of alcohol. Following is the recommended dose of Polycide for the desired results.
Method of Application – Distilleries :For an optimum control in 1000 liters of fermentation solution of molassess 100 ml of Polycide to be added which will give a concentration of 10 ppm in the solution of molassess. However, a minimum of 50 ml of Polycide should be added for a concentration of 5 ppm per 1000 liters solution of molassess. Polycide should be added directly to the fermenter containing molassess.
Sugar Industry :In sugar industries, the fine particles of sugar are blown up along with hot air while sugar is being dried. The exit air after drying sugar contains fine particles of sugar which are removed by scrubbing with water. The water is continuously circulated and the sugar gets dissolved making ‘Sweet Water”. This sweet water remains in circulation unit until it reaches a desired concentration of sugar. This sweet water is then sent to processing plant for recovery of sugar. During the circulation period, sweet water is susceptible for fermentation caused by bacteria. Polycide can be used to prevent the fermentation of sugar in sweet water, thereby increasing the recovery of sugar.
Usage :For optimum control in 1000 liters of sweet water, 200 ml of Polycide should be added which will give a concentration of 20 ppm in the bulk sweet water quantity. However a minimum of 100 ml of Polycide should be used for 1000 liters for a concentration of 10 ppm.
Method of Application for Sugar Industries :Polycide can be added directly to the sweet water or the desired quantity of Polycide concentrate can be diluted in a bucket of water for convenience of adding it to the sweet water while in circulation or otherwise.
Horticulture :Algal growth on the sand of propagating benches will be prevented by the addition of 10 ml of Polycide solution to every 100 gallons (450 liters) of water used for bench irrigation. Frequency of treatment will depend on the loss of water in its liquid phase from the bench. Under normal conditions, the addition of Polycide to the bench irrigation water should be made twice a month.
Handling, Storage and Precaution :
Polycide has a long shelf life under normal condition. The solution is alkaline in character and non-corrosive to metals. The material shall be stored in a closed container at room temperature. Use PVC hand glove while handling, In case of spillage over body, wash with sufficient quantity of water. In case of accidental ingestion, consult industrial physician.
It is not advisable to use Polycide under the following conditions :
Note : Nothing in this product bulletin is to be taken as warranty. We have offered the technical data for your consideration. Purchaser should determine by their own method the desirability and dosage of this product for their specific use / purpose.
Polysand Iodophor is a powerful Dairy sanitizer. Milk and milk products are one of the most likely foods to be spoiled by bacterial contamination. A definite hygiene program is a prerequisite for all stages of milk production. Iodophors are extensively used in Great Britain, the United States, Australia, New Zealand etc. and its effectiveness as cleaners and sanitizers is well-established. Polysan – D is an iodophor product containing ‘Tamed Iodine’ complexed with non-ionic surface agent and phosphoric acid.
Attributes :
Active ingredients : Available iodine 1.6%, alkyl phenoxy poly oxyethylene ethanol (surface active agent), phosphoric acid 10%.
Advantages :
Directions for Use :The usual operation in handling dairy and other food-processing equipment is to clean it for removing any excess foreign material and then giving a sanitizing rinse. For cleaning 0.5% to 1% solution in water containing 75-150 ppm of available iodine may be used. A sanitizing rinse with 0.1% to 0.2% of solution containing 15-25 ppm, available iodine may be given thoroughly drained and air-dried just before use.
Dairy Use :For cleaning and disinfection of milk house and milking parlors: Spray walls, floors and ceiling with solutions containing 1 liter Polysan – D in 150 liters of water. (0.75% solution containing 100 ppm available iodine).
For Milking Utensils and Equipment :
For Sanitizing Clean Equipment :
For Bulk Milk Tanks :
For Cleaning and Disinfection of Food Processing Equipment and Utensils :
For Bulk Milk Vending Machine:
Use in Mastitis :Polysan – D is very effective in killing mastitis organisms. Research carried-out by National Institute of Dairying in U.K has shown that the use of iodophor as teat-dip considerably reduces the incidence in mastitis. It is ideally suited because of its fast and wide range of kill and kindness to the skin, both of cow’s udders and milkers’ hands and visual indication of the germicidal strength. To combat mastitis, use 1 per cent solution of Polysan – D in water for washing udder and the udder cloth. Further TEAT-DIP technique may be used. Test-dip should be used to leave a protective film of iodine on the skin of teat between milkings. For this make up a stock solution in the proportion of one part of Polysan – D with 3 parts of water. From this solution take some in a suitable cup to dip teats in it for a few minutes and then leave the protective coating on the teat till the next milking.
To prevent mastitis, use ½% solution of Polysan – D with water i.e. one part of solution diluted with 200 part of water (available iodine 75 ppm). Milker’s hands should also be immersed in this solution between cows.
Alternatively Use, for Tank and Udder Wash : Wet towel in solution containing 1 liter Polysan – D in 1000 liters of water (0.1% solution with 15 ppm available iodine).
Caution :Use only as directed. The concentrate, without dilution is harmful, if swallowed or if it comes in contact with the eyes and may also cause skin irritation. In case of contact of the concentrate with skin or eyes, flush with plenty of water for 10 minutes and get medical attention if necessary. Keep the concentrate away from food and feed-stuffs. Polysan – D diluted as directed is safe, however, avoid breathing and mist when spraying. A distinct yellow or amber color of the Polysan – D solution indicates the presence of active iodine. If color fades, prepare a fresh solution. Do not use hot water to prepare solutions. Keep in a cool place. Do not use soap or other cleaners.
Polydine (Iodine Solution) is an antiseptic solution broad spectrum bactericidal, fungicidal, virucidal, sporicidal solution. Polydine is a multipurpose microbiocidal solution that’s kills both Gram-positive and Gram-negative bacteria. Its microbiocidal action also extends to fungi, viruses protozoa and yeast. It is available as Polydine 5% and Polydine 10%
Active ingredient : Povidone Iodine IP 5% w/v (0.5% w/v available iodine) or Povidone Iodine IP 10% w/v (1.0% w/v available iodine).
Applications :
Directions for use :Should be applied full strength as often as required, as a paint or wet soak. Its activity persists as long as the color remains. The golden brown color serves as an indicator to highlight the disinfected areas.
Caution :
Applications and directions for use :
We are a prominent Manufacturer, Exporter, and Supplier of Polysan (Iodophor). Polysan is a good broad spectrum disinfectant with excellent bactericidal, fungicidal, and algaecidal properties. It is widely used in Hospitals, Veterinary and Food Processing Industry for complete disinfection. Polysan has highly effective, non-selective, and wide spectrum bactericidal action.
Attributes :
Active Ingredient : Alkyl phenoxy polyethoxy, ethanoliodine complex. Available (titratable) iodine 1.6% minimum. PolySan – A is fast acting and non-selective. It covers a wide-spectrum of effectiveness and protection against wide variety of disease-causing agents, such as bacteria, spores, viruses, molds, protozoa, fungi, yeast and other pathogens. PolySan – A has residual anti-bacterial effect which last four days or more.
Safety : Iodine in the form of iodophor in Polysan is effective even when available in very minute quantity, such as 0.0075% (75 ppm) or less. In this form iodine is non-toxic and non-irritating, practically non-staining and safe-when used as directed.
Economical : PolySan - A is supplied in highly concentrated form. For most uses, only 0.5% solution of Polysan in water is sufficient – 1 liter of PolySan - A will provide 200 liters of use-solution for general disinfection.
Self-Indicator : Polysan has the unique distinction of indicating its own germicidal activity. When used in recommended dilution, the solution is of a rich amber color. In use, the color fades as the iodine-complex kills organisms and iodine gets used up. However, as long as the amber color remains in the solution, germicidal action continues. The user may be certain at all times that the disinfectant solution retains the ability to kill most organisms quickly and completely. In case of many other disinfectants the smell persists beyond their germicidal activity cease and thereby misguiding the user.
Applications :
It can be used from housekeeping uses, such as walls, floors and other surfaces, to the operating theatre and surgical wards. Some of its specific uses are listed below :
Directions for Use :Polysan is highly concentrated and only 0.5% solution in water is used as a general-purpose disinfectant and cleanser (5 ml of Polysan: 1 litre of water, 75 ppm available iodine). For porous surface or those difficult to clean, especially molds and fungi use 1% solution (10 ml of Polysan: 1 LITRE of water, 150 ppm available iodine). The use solution will have a dark-brown color, and with usage the fading of color indicates germicidal property being used up. When color fades away, prepare fresh solution. The surface article to be disinfected should be in through contact with solution for about 5 minutes.
General Instructions :Polysan should be diluted with water at room temperature. Hot water, soap or other detergents should not be used with Polysan. If required, Sodium nitrite should be added as indicated in the dilution chart for instrument disinfection.
Polysan should not be used with copper, brass or poorly plated or worn-out articles of metal. Polysan solution will not affect articles of stainless steel or aluminum or other properly plated metals.
Povidone Iodine Powder (IP/BP/ USP) is a broad spectrum antiseptic for topical application in the treatment and prevention of infection in wounds. Povidone Iodine Powder may be used in first aid for minor cuts, grazes, burns, abrasions and blisters. Iodine has been recognized as an effective broad-spectrum bactericide, and it is effective against yeasts, molds, fungi, viruses, and protozoans.
Povidone Iodine Powder is completely soluble in cold and mild-warm water, ethyl alcohol, isopropyl alcohol, polyethylene glycol, and glycerol. Its stability in solution is much greater than that of tincture of iodine or Lugol's solution. Slow release of iodine from the PVPI complex in solution minimizes iodine toxicity.
Propylene Glycol (IP/ USP), also called 1, 2-propanediol or propane-1, 2-diol, is an organic compound (a diol or double alcohol) with formula C3H8O2. It is a colorless, nearly odorless, clear, viscous liquid with a faintly sweet taste, hygroscopic and miscible with water, acetone, and chloroform.
Propylene Glycol finds its application in food and beverage, feed, cosmetics and pharmaceutical applications. Propylene Glycol USP/EP (pharmaceutical grade) is also used to dissolve flavoring in drinks, to keep animal feed moist, to homogeneously emulsify oily and watery elements in creams, sprays and liquids, or as solvent (excipient) for the active ingredients in medicines.
Pharmaceutical applications include :
Specifications
Test | Requrement |
---|---|
Description | A clear, colourless, viscous liquid ; practically odourless ; hygroscopic |
Solubility | Miscible with water, with ethanol (95%) with acetone and with chloroform. |
Identification | A) A violet colour slowly appears. B) A pleasant odour develops. C) No sharp, acrid smell of acrolein is perceptible. |
Appearance of solution | Substance is clear and colourless. |
Acidity | NMT 0.05ml of 0.1M NaOH is required. |
Boiling Range | Between 184 º and 189 ºC |
Relative Density | Between 1.035 and 1.040 |
Refractive index | Between 1.431 and 1.433 |
Heavy metals | NMT 5ppm |
Oxidising Substances | Not more than 0.2 ml of 0.05M Sodium thiosuphate is required. |
Reducing Substances | The solution does not changes is appearance within 5 minutes. |
Ethylene glycol & diethylene glycol by GC. | No peaks corresponding ot Ethylene glycol & diethylene glycol are obtained in the chromatogram obtained with the test solution. |
Sulphated ash | Not more than 0.01 Per cent w/w |
Water | Not more than 0.2 per cent w/w |
Zinc Sulphate Monohydrate (IP/ USP) is the inorganic compound with the formula ZnSO4. It was historically known as "white vitriol". Zinc Sulphate Monohydrate is a colorless solid that is a common source of soluble zinc ions. We are one of the largest Manufacturers, Exporters and Suppliers of Zinc Sulphate Monohydrate.
Magnesium Carbonate (Light BP), MgCO3, is an inorganic salt that is a white solid. Magnesium Carbonate is used as an antacid and alkaline buffer in pharmaceutical preparations. Magnesium Carbonate is also used as an ingredient in toothpastes and dentifrices, and in the preparation of magnesium citrate. We offer pure and adulterant free Magnesium Carbonate powder to the clients.
Specifications
CAS No. | 7446-20-0 |
---|---|
Formula | ZnSO4 7H2O |
Description | Colourless transparent crystal. |
Solubility | Passes IP Test |
Identification | Zinc: Positive, Sulphate:Positive |
PH | 5.28% |
Al Copper, Magnesium, Manganese & Nickel | Passes IP Test |
Alkalis & Alkaline Earths | 4 Gms |
Arsenic | Passes IP Limit Test |
Iron | Passes IP Limit Test |
Heavy Metal | Passes IP Limit Test |
Chloride | Passes IP Limit Test |
Zn So4 (as Zn %) | Min 22.5% |
Assay | 99.5% to 101% |
Packing | 50 Kgs Bags |
Ammonium Chloride (IP), an inorganic compound with the formula NH4Cl, is a white crystalline salt, highly soluble in water. Solutions of Ammonium Chloride are mildly acidic. Sal ammoniac is a name of the natural mineralogical form of Ammonium Chloride. Ammonium Chloride is used as an expectorant in cough medicine. Its expectorant action is caused by irritative action on the bronchial mucosa. This causes the production of excess respiratory tract fluid, which presumably is easier to cough up.
Specifications
TESTS | LIMIT |
---|---|
Description | White crystalline powder. |
Solubility | Freely soluble in water. |
Identification | Gives reaction of NH4 salt & chlorides. |
Clarity & Color of soln. | 10% w/v sample sol. is clear & colorless. |
PH of 50% w/v Sol. | Between 4.5 to 6.0. |
Arsenic | Less than 4 PPM. |
Calcium | Less than 200 PPM. |
Iron | Less than 20 PPM. |
Heavy Metals | Less than 10 PPM. |
Basic Sulphate | Less than 150 PPM. |
Thiocynate | To Comply as per IP. |
Sulphated Ash | Less than 0.1 % |
Loss on drying | Less than 1.0 % |
Assay | Between 99.0% to 100.5% cal. on dried basis. |
Calcium Chloride (IP / Ph. Eur), CaCl2, is a salt of calcium and chlorine. It behaves as a typical ionic halide, and is solid at room temperature. Common applications of Calcium Chloride include brine for refrigeration plants, ice and dust control on roads, and desiccation.
Calcium Chloride Dihydrate is used in the pharmaceuticals industry, for dialysis and infusion solutions, and infant and children’s diets. Calcium Chloride Dihydrate is also used for drinks, and various other solutions in the food industry. Calcium Chloride Dihydrate can also be used in the manufacturing of salts for salt-water aquariums.
It is injected to treat internal hydrofluoric acid burns. It can be used to treat magnesium intoxication. Calcium chloride injection may antagonize cardiac toxicity as measured by electrocardiogram. It can help to protect the myocardium from dangerously high levels of serum potassium in hyperkalemia. Calcium chloride can be used to quickly treat calcium channel blocker toxicity, from the side effects of drugs such as diltiazem (Cardizem) — helping avoid potential heart attacks.Aqueous calcium chloride is used in genetic transformation of cells by increasing the cell membrane permeability, inducing competence for DNA uptake (allowing DNA fragments to enter the cell more readily).
Specifications
Description | White, Crystalline Powder Or Fragments Or Granules; Odourless; Hygroscopic |
---|---|
Solubility | Freely Soluble In Water & In Ethanol (95%). |
Standard | 97.0% To 103.0% |
Identification | To Pass Test |
Clarity And Colour Of Soln. | To Pass Test |
Acidity & Alkalinity | NMT 0.2 Ml Is Required. |
Arsenic | NMT 3 Ppm |
Iron | NMT 20 Ppm |
Heavy Metals | NMT 10 Ppm |
Magnesium & Alkali Salts | NMT 1%. |
Aluminum And Phosphate | To Pass The Test. |
Barium | To Pass The Test. |
Sulphate | NMT 300 PPM |
We are a major Manufacturer, Exporter and Supplier to food and pharmaceutical firms of Potassium Chloride (IP / Ph. Eur) (KCl). In addition to standard grades of Potassium Chloride, our plant in adheres to current GMP (Good Manufacturing Practices) and is overseen by the FDA.
The chemical compound Potassium Chloride (KCl) is a metal halide salt composed of potassium and chlorine. In its pure state, it is odorless and has a white or colorless vitreous crystal appearance, with a crystal structure. Potassium chloride was historically known as "muriate of potash". This name is occasionally still encountered in association with its use as a fertilizer. KCl is used in medicine, scientific applications, and food processing.
Potassium Chloride (KCl) is used extensively by the pharmaceutical and food industries to provide a number of functional benefits including sodium reduction and nutrient replacement. It is also used as a reagent in laboratory testing, as a reducing agent in the high purity metals industry, in the production of photographic film and in buffering solutions.
Specifications
SOLUBILITY | FREELY SOLUBLE IN WATER, PRACTICALLY INSOLUBLE IN ETHANOL AND IN ETHER |
---|---|
IDENTIFICATION | POSITIVE |
ACIDITY OR ALKALINITY | COMPLIES |
APPEARANCE OF SOLUTION | 10 % W/V SOLUTION IS CLEAR AND COLORLESS |
ARSENIC | MAX.1 PPM |
BARIUM | COMPLIES |
HEAVY METALS | MAX. 10 PPM |
CALCIUM AND MAGNESIUM | PER IP THE SOLUTION REMAINS CLEAR. |
IRON | MAX. 20 PPM |
BROMIDE | MAX. 0.1% |
IODIDE | PER IP THE SUBSTANCE SHOWS NO BLUE COLOUR AFTER 5 MIN. |
SULPHATE | MAX. 300 PPM |
LOD IN OVEN AT 105° C. | MAX. 1.0% |
ASSAY (ON DRIED BASIS) | 99.0 % -- 100.5 % |
We are a noted Manufacturer, Exporter and Supplier of high purity Disodium Edetate (EDTA Disodium) (IP/BP) as per IP and BP Monograph. Ethylenediaminetetraacetic acid, widely abbreviated as EDTA, is an aminopolycarboxylic acid and a colourless, water-soluble solid. Its conjugate base is named ethylenediaminetetraacetate. It is widely used to dissolve limescale. Its usefulness arises because of its role as a hexadentate ("six-toothed") ligand and chelating agent, i.e. its ability to "sequester" metal ions such as Ca2+ and Fe3+. After being bound by EDTA, metal ions remain in solution but exhibit diminished reactivity. EDTA is produced as several salts, notably disodium EDTA and calcium disodium EDTA.
EDTA is used to bind metal ions in the practice of chelation therapy, e.g., for treating mercury and lead poisoning. Dentists and endodontists use EDTA solutions to remove inorganic debris (smear layer) and lubricate the canals in endodontics.
EDTA is used extensively in the analysis of blood. It is an anticoagulant for blood samples for CBC/FBEs.
Specifications
Chemical Formula | C1014228.2H2 |
---|---|
Molecular Weight | 372.24 gms |
Description | White, crystalline powder, odourless. |
Identification | As per IP |
Solubility | Soluble in water, sparingly soluble in ethanol (95%), practically insoluble in chloroform and in ether. |
pH (5% w/v Solution) | 4.0 to 5.5 |
Clarity and colour of solution | As per IP |
Heavy metals | N.M.T. 20 Ppm |
Iron | As per IP |
Assay | 98.5% to 101.0% |
Methanol AR/ LR / Extra Pure (Complies with BP/ USP) also known as methyl alcohol, wood alcohol, wood naphtha or wood spirits, is a chemical with the formula CH3OH (often abbreviated MeOH). Methanol acquired the name "wood alcohol" because it was once produced chiefly as a byproduct of the destructive distillation of wood.
Methanol is produced in a catalytic industrial process directly from carbon monoxide, carbon dioxide, and hydrogen.
Methanol is the simplest alcohol, and is a light, volatile, colorless, flammable liquid with a distinctive odor very similar to, but slightly sweeter than, that of ethanol (drinking alcohol). At room temperature, it is a polar liquid, and is used as an antifreeze, solvent, fuel, and as a denaturant for ethanol.
Specifications
Test | Observation | Limit as per party specification |
---|---|---|
Description | A clear colourless liquid with a characteristic odour is flammable | Aclear colour liquid with a characteristic odour, is flammable. |
Solubility | Miscible with water, alcohol, ether and with benzene and with most organic solvent. | Miscible with water, alcohol, ether and with benzene and with most organic solvent. |
Identification by (IR & GC) | Complies | [Should complies IR & GC] |
Readily carbonizable substance | Complies | [No discoloration should be developed] |
Acidity | Passes | [NMT 0.45ml of 0.020N NaOh] |
Alkalinity | Passes | [NMT 0.20 ml of 0.020 N H2SO4] |
Non-volatile matter | 0.00% | [NMT 0.001%] |
Aldehydes and ketone (as acetone) | <.002% | Any turbidity produced in the sample preparation should not be greater than that produced in the standard preparation. [NMT 0.003%] |
Readily oxidizable substances | Complies | [Pink colour shoul be not completely disappear within 5 minute] |
Water | 0.07% | [NMT. 0.1%] |
Assay | 99.80% | [NLT 99.5%] |
Acetanilide, Perfumery Grade is an odorless solid chemical of leaf or flake-like appearance. Acetanilide is used as an inhibitor of hydrogen peroxide decomposition and is used to stabilize cellulose ester varnishes. It has also found uses in the intermediation in rubber accelerator synthesis, dyes and dye intermediate synthesis, and camphor synthesis.
Acetanilide is used for the production of 4-acetamidobenzenesulfonyl chloride, a key intermediate for the manufacture of the sulfa drugs. It is also a precursor in the synthesis of penicillin and other pharmaceuticals. Acetanilide is reported as used in fragrance compounds in 2008 (IFRA Fragrance Ingredient List3).
The perfuming properties of Acetanilide are also used to remove/mask unwanted odor from the product. When employed as a separate masking ingredient Acetanilide has to appear in the list of ingredients.
Specifications
Formula | C6H5.NH.Co.CH3 |
---|---|
Molecular Weight | 135.17 |
Assay | NLT – 98.5% |
Melting point | 114 ºC – 116 ºC |
Sulphated Ash | NMT 0.05% |
Polydex (Glutaraldehyde Solution) is effective against a broad spectrum of micro-organisms, specially, aerobic and anaerobic organisms, viruses, and spores.
Polydex containing 2% glutaraldehyde, is ideally suited for disinfecting sterilizing surgical and other instruments. It does not cause any damages to the plastic or rubber article and contains rust-inhibitor for metal instruments. It can safely be used for the following instruments :
Polydex rapidly kills all pathogens; complete disinfection in 10 minutes it is bactericidal, tuberculocidal, pseudomonoacidal virucidal & Fungicidal. Polydex is also sporicidal and sterilizes within 4 – 10 hours, even in the presence of protein matter as blood, serum, mucous and soap. Polydex Solution can be used in small or large trays or buckets are required by the hospitals depending upon the size of the instruments to be disinfected or sterilised. Each Polydex container is provided with required quantity of the activator.
Directions for Use :
Directions for Activating :
Precautions :
Caution :