Laboratory Equipments #358892

• Weighing Capacity 35g
• Repeatability (Std Dev) (g) 0.10% for 3g sample/ 0.03% for 10g sample
• Readability 0.01% / 0.001g
• Moisture Range 0.01% - 100%
• RS232 Interface
• Timer 1 120 minutes, 30 second increments to 60 minutes, 1 min increments from 60 120 min
• Infrared Halogen Heating
• Temperature range 50C 160C in 5C increments
• Electrical characteristics 100 120 VAC, 50/60 Hz or 220 240 VAC, 50/60 Hz
• LCD backlit display 128 x 64 pixel
• Displays % moisture, time, temperature and weight
• 1 off re-usable Stainless Steel sample pan included as standard
• CE, CSA/UL and FCC approved

• Sample Pan Handler
• Security Cable
• Temperature Calibration Kit
• 20g ASTM Class 1 Calibration Weight
• Sample Pans (80/Box)
• Glass Fibre Pads (100/Box)
• Reusable Sample Pan (3/Box)
• Printer SF42-EU
• Printer SF42-GB
• Printer Cable
• Computer software

• Weighing Capacity up to 320g
• Repeatability (g) 0.0001
• Readability (g) 0.0001
• Auto Calibration
• 90mm Diameter Weighing platform
• RS232 Interface & USB
• Display Size 5.7 in / 145 mm (diagonal)
• Display Full-colour VGA graphic display, 4-wire resistive touch screen
• Electrical characteristics AC Adapter Input: 100-240 VAC 0.6A 50-60 Hz
• CE, CSA/UL and FCC approved
  

• Thermal Printer
• Impact Printer
• Printer Cable
• Ethernet Interface Connector

• Easily customizable, depending on clients requirements

• CelCradle bioreactor system:

1. Works under the tide motion principle, wherein cells are exposed intermittently to nutrition and aeration through the compression and decompression of the bellows
2. Each CelCradle bottle provides up to 15, 000 cm2 of surface area for cell attachment and proliferation
3. Each CelCradlebottle is capped with a lid that is lined with a 0.22 m PTFE filter
4. Each CelCradlebottle can accommodate up to 5 billion cells
5. The system can run in batch, fed-batch, and perfusion modes
6. Each CelCradlebottle is designed for single use only, eliminating the need for sterilization

• HPI G3:

1. Provides ISO Class 5 environment in the work chamber
2. Fitted with H14 filters with typical efficiency of 99.995% at 0.1 to 0.3 microns
3. 3 Sets of H14 Filter: 1 for supply and 2 for exhaust
4. Esco Isocide antimicrobial coating on all painted surfaces minimizes contamination
5. Ergonomically front-angled and 200 mm gloveports for improved reach and comfort

• Esco CO2 Incubator:

1. SteriSafe ULPA filtration system maintains ISO Class 5 environment inside the incubator
2. Fast CO2, temperature and humidity recovery without overshoot
3. The interior of the chamber is made from stainless steel type 304.

• Versati Centrifuge:

1. Maintenance-free brushless motor
2. Diverse choices of rotors
3. Motor driven lid lock
4. Ensure safety and reliability
5. Adjustable acceleration control system

• Protein Expression
• Virus Production
• Monoclonal Antibody Production
• Cell Processing
• Cell Therapy
• Vaccine Research
• Small Scale Phase III Vaccine Production

• Maximum torque: 100 lbFin (11.3 Nm)
• Maximum angular travel: no l imit
• Throat: 4.10" (104 mm)
• Angular rate: 12 / wheel rev.
• Angle dial with 2 resolution (optional digital angle indicator has 0.1 resolution, see below)
• Maximum slider travel: 15.5" (394 mm)
• Slider travel rate: 1.047" (26.6 mm)/lever rev
• Adjustable travel stops
• Torque plate with tapped holes for grip and fixture mounting
• Smooth hand wheel operation
• Lever operated slider for engaging and disengaging samples

• Maximum force: 1, 000 lbF [5 kN]
• Maximum travel: 3.5" [89 mm]
• Compatible with all Mark-10 force gauges, accessories and grips
• Mounting holes for bench mounting
• Loading table with 25 #10-32 UNF holes for fixture mounting
• Precision Acme screw and nut
• Optional digital travel display

We are offering motorized test stands.the esm301 and extended length esm301l are highly configurable motorized test stands with pc control for tension and compression testing applications up to 300 lbf (1.5 kn) for laboratory and production environments. The stands can perform a wide range of tests, including break testing, cycling, limit testing to a load or distance, load holding, elongation testing, tensile testing, compression testing, and more. Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload, and many other functions. The stands can be controlled via its console or pc. Functions are offered individually through a unique "build-your-own" configuration platform. Order any combination of functions to customize the stand to specific requirements. Functions not ordered originally can be activated in the field. A password can be set to protect against unauthorized changes. Modular mechanical design allows the test frame and controller to be separated for various mounting configurations.

• Maximum load

• Speed range

• Speed accuracy

• Digital display of angle
• Programmable angle limits
• Rotational travel accuracy: 0.7 / 0.02 rev.
• Rotational travel repeatability: 0.1 / 0.01 rev.
• Rotational travel resolution: 0.1 / 0.01 rev.
• Throat: 4.10" [104 mm]
• Manual adjustment: 12 / adjustment knob rev
• Angle dial with 2 resolution
• Maximum slider travel: 15.5" [394 mm]
• Slider travel rate: 1.047" [26.6 mm] / lever rev
• Universal power supply: 80-250 VAC
• CE mark

• Computer Control

• Digital Angle Indication

• Programmable Angle Limits

• Overload Protection

• Auto-return

• Cycling / Dwell Time

• Programmable Button Functions

• Independent CW and CCW Speeds

• Selectable speed units of measurement (RPM and /s)

• Password protection

• 22 Litres of capacity
• LED panel displays temperature
• Over-temperature and over-current protection
• Rapid heat diffusion
• Powder coated stainless steel exterior
• Stainless steel interior
• Digital PID controller with auto tuning function
• Pt-100 temperature sensor
• Indicates if the water level is low

• Protection against leakage and over-loading, overheating, over-temperature
• Safety devices includes high and low pressure protective switch, high current and high humidity temperature protective switches
• Controlling Operations through color, touch screen display
• Internal chamber is of SUS304 stainless steel while external is of stainless steel
• Incorporated with PC link software, R-232 /R-485 interface
• Nichrome electronic heating system
• Provides function of automatic water supply with build-in water reservoir
• Auto refrigeration system installed which starts cooling automatically at high temperature
• Equipped with LCD touch screen with user friendly interface
• Advanced refrigeration and control system

• Light and temperature can be controlled through an user friendly coloured touch screen
• Light intensity control system allow users to set different test light intensity based on test requirements
• Designed to perform UV light testing with the help of UV carbon lamps
• Used to test aging-resistance of material when exposed to sunlight, temperature, humidity and rain

• Water jacket type
• Microprocessor PID controller/Programmable controller
• LED display
• Timer alarm, auto tuning, over temperature and current protection system for user safety
• Tempered safety glass with magnetic packing
• Made of stainless steel and powder coated steel plate
• Auto temperature compensation and auto sensor calibration

• Precise micro-processor control
• It has user friendly calibration
• Sample block easily removable for cleaning or replacement
• Over temperature alarm protection
• Transparent cover to reduce the experiment error

Air jacketed CO2 Incubator delivers a higher level of performance for a dependable and reliable in-vitro growth environment through water jacket that provides true temperature uniformity and CO2 gas control. They are equipped with Hot Air Circulation System and UV light system for periodic sterilization of chamber which stands as the ultimate reason behind a successful incubation. It is designed with polished stainless-steel shelves and semicircular arcs at corners for easy cleaning. It comes with 80L to 233L capacity range.

Features :
Microprocessor-based PID controller with large LCD screen
Hot air sterilization circulation system and UV light system for periodic sterilization of chamber
Functions incorporated like Alarm function for temperature difference, over CO2 concentration, door open time, UV working status, etc
Equipped with micro-organism filter at inlet for filtration of bacteria, dust, so that it supplies pure CO2 into the incubator
Separate temperature-limiting alarm system for safe usage
Auto-controller of fan speed to prevent sample damage
Door temperature controller prevents dewfall on glass door
Options are available to connect printer and computer for data recording (Optional) via RS-485 connector

Applications :
Series LAJI-A from Labtron is widely used for a broad range of applications that includes Tissue engineering, In vitro fertilization, Neuroscience, Cancer research, Stem cell research, Regenerative medicine, Mammalian cell research.