Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Melt flow tester

Listing ID #4157798

  • ASTM D3364Standard Test Method for Flow Rates for Poly(Vinyl Chloride)
  • ASTM D1238Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer Method A
  • ASTM D2839Standard Practice for Use of a Melt Index Strand for Determining Density of Polyet
  • ISO 1133Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow ra
  • Supply Type Manufacturer, Supplier
Preferred Buyer From : All over the world
Send Enquiry
Ghodbunder Road, Thane, Maharashtra
View Number
  • Member Since 16 Years
  • Nature of Business Exporter
  • Year of Establishment 2004

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die)from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.
The 6MBA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner, standard test die and piston along with 2.16 kg test load and cleaning ancillaries. The temperature controller used is a 16th DIN type and displays the current temperature and set point and is accurate to 0.1 deg C. A PT100 Platinum Resistance Thermometer is used to accurately control the temperature of the barrel. The maximum allowable temperature variation along the length of the cylinder liner is in accordance with ISO1133 International Test Standard. An integrated timer is also fitted to accurately time the extrusion of the material in seconds to enable you to calculate the Melt Mass Flow Rate (MFR). All documentation is supplied including a product user manual and a fully traceable calibration certificate.
Optional weights can be supplied to cover all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston. The weight loader can also be used as a hold back feature for materials which have a high flow rate.

 
The 6MBA is the basic model offered within the Ray-Ran Range of Melt Flow Indexers
The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die)from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.
The 6MBA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner, standard test die and piston along with 2.16 kg test load and cleaning ancillaries. The temperature controller used is a 16th DIN type and displays the current temperature and set point and is accurate to 0.1 deg C. A PT100 Platinum Resistance Thermometer is used to accurately control the temperature of the barrel. The maximum allowable temperature variation along the length of the cylinder liner is in accordance with ISO1133 International Test Standard. An integrated timer is also fitted to accurately time the extrusion of the material in seconds to enable you to calculate the Melt Mass Flow Rate (MFR). All documentation is supplied including a product user manual and a fully traceable calibration certificate.
Optional weights can be supplied to cover all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston. The weight loader can also be used as a hold back feature for materials which have a high flow rate.
 
Please be aware that this machine has no computer connectivity or file capture software functionality.
Although the MFR value is not a fundamental property of the polymer, it does however, give an indication of the flow characteristics of the polymer and it has become one of the most widely used references for the quality control of polymers.
Technical Specification

 
Technical Specification
  • Digital Temperature Controller
  • Large Twin Colour Display
  • Easy Set Point Operation
  • Temperature Accurate to +/- 0.1°C
  • Temperature Range 0 to 400°C
  • Temperature Resolution +/- 0.01°C
  • Digital Timer - Large easy to read display
  • Test Die, Piston & 2.16kg Test Weight supplied as standard
  • Filling and cleaning tools included as standard
  • Conforms to method A of the ASTM standard
  • Count Range - 1 second to 99999 hours 59 seconds (8 character display)
  • Electrical characteristics: 110v@60hz and 220v@50hz – fuse rating: 10amp

 

Optional Ancillaries
  • Weight Loader
  • Full Range of Test Weights Available from 1Kg to 21.6Kg
  • Hastalloy cylinder liner, Piston and Die for corrosive materials


Company Details close-icon

at polytech, we follow our simple road map hire the best technical staff and field engineers, have an honest and positive approach and provide the best value for money to our customers in forms of instruments and services. this coupled with the simple tried and tested formula of timely delivery as well as effective and prompt after sales service is our mantra for success.
with the purpose of providing cost effective solutions for scientific instruments as well as laboratory testing instruments backed by industry-leading warranties, our product engineers start with a clear, concise vision laying out your objectives and expectations as well as the resources required to successfully delivering your product. while working on each plan, we communicate frequently with you to keep you updated on the process as well as interact with you to ensure that the product meets your specifications and timely deliveries.
to maintain a steadfast focus on qualitative improvements that drives and empowers our presence is the rationalized business policy at polytech. we not only aim and strive to deliver impeccable service - results that are simply faultless - but to collaborate with our customers as their partners in growth and envision our success in their achievements.
  • Nature of Business Manufacturer / Exporter / Supplier / Trader
  • Number of Employees Below 20
  • Year of Establishment 2004
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for melt flow tester?

Quantity
Seller Contact Details
  • Seller Polytech Instruments Pvt.Ltd.
  • Address Ghodbunder Road, Thane, Maharashtra

Find Seller from near by Cities

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice
melt flow tester at Best Price in Thane - ID: 4157798 | Polytech Instruments Pvt.Ltd.
Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Melt flow tester

Listing ID #4157798

  • ASTM D3364Standard Test Method for Flow Rates for Poly(Vinyl Chloride)
  • ASTM D1238Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer Method A
  • ASTM D2839Standard Practice for Use of a Melt Index Strand for Determining Density of Polyet
  • ISO 1133Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow ra
  • Supply Type Manufacturer, Supplier
Preferred Buyer From : All over the world
Send Enquiry

Company Information

  • Member Since 16 Years
  • Nature of Business Exporter
  • Year of Establishment 2004

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die)from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.
The 6MBA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner, standard test die and piston along with 2.16 kg test load and cleaning ancillaries. The temperature controller used is a 16th DIN type and displays the current temperature and set point and is accurate to 0.1 deg C. A PT100 Platinum Resistance Thermometer is used to accurately control the temperature of the barrel. The maximum allowable temperature variation along the length of the cylinder liner is in accordance with ISO1133 International Test Standard. An integrated timer is also fitted to accurately time the extrusion of the material in seconds to enable you to calculate the Melt Mass Flow Rate (MFR). All documentation is supplied including a product user manual and a fully traceable calibration certificate.
Optional weights can be supplied to cover all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston. The weight loader can also be used as a hold back feature for materials which have a high flow rate.

 
The 6MBA is the basic model offered within the Ray-Ran Range of Melt Flow Indexers
The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die)from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.
The 6MBA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner, standard test die and piston along with 2.16 kg test load and cleaning ancillaries. The temperature controller used is a 16th DIN type and displays the current temperature and set point and is accurate to 0.1 deg C. A PT100 Platinum Resistance Thermometer is used to accurately control the temperature of the barrel. The maximum allowable temperature variation along the length of the cylinder liner is in accordance with ISO1133 International Test Standard. An integrated timer is also fitted to accurately time the extrusion of the material in seconds to enable you to calculate the Melt Mass Flow Rate (MFR). All documentation is supplied including a product user manual and a fully traceable calibration certificate.
Optional weights can be supplied to cover all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston. The weight loader can also be used as a hold back feature for materials which have a high flow rate.
 
Please be aware that this machine has no computer connectivity or file capture software functionality.
Although the MFR value is not a fundamental property of the polymer, it does however, give an indication of the flow characteristics of the polymer and it has become one of the most widely used references for the quality control of polymers.
Technical Specification

 
Technical Specification
  • Digital Temperature Controller
  • Large Twin Colour Display
  • Easy Set Point Operation
  • Temperature Accurate to +/- 0.1°C
  • Temperature Range 0 to 400°C
  • Temperature Resolution +/- 0.01°C
  • Digital Timer - Large easy to read display
  • Test Die, Piston & 2.16kg Test Weight supplied as standard
  • Filling and cleaning tools included as standard
  • Conforms to method A of the ASTM standard
  • Count Range - 1 second to 99999 hours 59 seconds (8 character display)
  • Electrical characteristics: 110v@60hz and 220v@50hz – fuse rating: 10amp

 

Optional Ancillaries
  • Weight Loader
  • Full Range of Test Weights Available from 1Kg to 21.6Kg
  • Hastalloy cylinder liner, Piston and Die for corrosive materials


Company Details close-icon

at polytech, we follow our simple road map hire the best technical staff and field engineers, have an honest and positive approach and provide the best value for money to our customers in forms of instruments and services. this coupled with the simple tried and tested formula of timely delivery as well as effective and prompt after sales service is our mantra for success.
with the purpose of providing cost effective solutions for scientific instruments as well as laboratory testing instruments backed by industry-leading warranties, our product engineers start with a clear, concise vision laying out your objectives and expectations as well as the resources required to successfully delivering your product. while working on each plan, we communicate frequently with you to keep you updated on the process as well as interact with you to ensure that the product meets your specifications and timely deliveries.
to maintain a steadfast focus on qualitative improvements that drives and empowers our presence is the rationalized business policy at polytech. we not only aim and strive to deliver impeccable service - results that are simply faultless - but to collaborate with our customers as their partners in growth and envision our success in their achievements.
  • Nature of Business Manufacturer / Exporter / Supplier / Trader
  • Number of Employees Below 20
  • Year of Establishment 2004
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for melt flow tester?

Quantity
Seller Contact Details
  • Seller Polytech Instruments Pvt.Ltd.
  • Address Ghodbunder Road, Thane, Maharashtra

Find Seller from near by Cities

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice