Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit

Technical Information:

• Standard Conformity : IS/IEC 60898-1:2015
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40, 63 AMP
• Rated Breaking Capacity : 10000A (10 kA) 
• Rated Voltage (Un) : 240V AC
• Rated Frequency : 50 Hz 
• Dielectric Strength : 2000 V for 1 Minute 
• Rated Insulation Voltage (Ui) : 660 V 
• Rated Impulse Voltage (Uimp) : 4 kV 
• Energy Limiting Class : Class 3 
• Ambient Temperature(°C ) : -5°C to 55°C 
• Degree of Protection : IP20 
• Tripping Mechanism : Thermal and Magnetic 
• Type Mounting : Snap on DIN rail at (35mm x 7.5mm) 
• Connecting Terminals : 25mm²

Micron Features

• Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked.
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load and Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard
• Shock Proof: Finger and Hand touch safe.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make and Break trip free mechanism.
• Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection.
• Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance.
• Positive Isolation.
• Suitable for Residential and Commercial applications.

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit

Technical Information:

• Standard Conformity : IS/IEC 60898-1:2015
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40, 63 AMP
• Rated Breaking Capacity : 10000A (10 kA) 
• Rated Voltage (Un) : 240V AC
• Rated Frequency : 50 Hz 
• Dielectric Strength : 2000 V for 1 Minute 
• Rated Insulation Voltage (Ui) : 660 V 
• Rated Impulse Voltage (Uimp) : 4 kV 
• Energy Limiting Class : Class 3 
• Ambient Temperature(°C ) : -5°C to 55°C 
• Degree of Protection : IP20 
• Tripping Mechanism : Thermal and Magnetic 
• Type Mounting : Snap on DIN rail at (35mm x 7.5mm) 
• Connecting Terminals : 25mm²

Micron Features

• Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked.
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load and Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard
• Shock Proof: Finger and Hand touch safe.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make and Break trip free mechanism.
• Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection.
• Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance.
• Positive Isolation.
• Suitable for Residential and Commercial applications.

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit

Technical Information:

• Standard Conformity : IS/IEC 60898-1:2015
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40, 63 AMP 
• Rated Breaking Capacity : 10000A (10 kA) 
• Rated Voltage (Un) :415V AC 
• Rated Frequency : 50 Hz 
• Dielectric Strength : 2000 V for 1 Minute 
• Rated Insulation Voltage (Ui) : 660 V 
• Rated Impulse Voltage (Uimp) : 4 kV 
• Energy Limiting Class : Class 3 
• Ambient Temperature(°C ) : -5°C to 55°C 
• Degree of Protection : IP20 
• Tripping Mechanism : Thermal and Magnetic 
• Type Mounting : Snap on DIN rail at (35mm x 7.5mm) 
• Connecting Terminals : 25mm²

Micron Features

• Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked.
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load and Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard
• Shock Proof: Finger and Hand touch safe.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make and Break trip free mechanism.
• Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection.
• Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance.
• Positive Isolation.
• Suitable for Residential and Commercial applications.

Technical Information:

• Tested in accordance with IS/IEC 60898-1 and are ISI marked
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load & Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make & Break trip free mechanism.
• Protection in Switch Board.
• Compact in Size.
• Suitable for Residential & Commercial applications.

Technical Information:

• Tested in accordance with IS/IEC 60898-1 and are ISI marked
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load & Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make & Break trip free mechanism.
• Protection in Switch Board.
• Compact in Size.
• Suitable for Residential & Commercial applications.

Technical Information:

• Tested in accordance with IS/IEC 60898-1 and are ISI marked
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load & Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make & Break trip free mechanism.
• Protection in Switch Board.
• Compact in Size.
• Suitable for Residential & Commercial applications.

Technical Information:

• Tested in accordance with IS/IEC 60898-1 and are ISI marked
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load & Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make & Break trip free mechanism.
• Protection in Switch Board.
• Compact in Size.
• Suitable for Residential & Commercial applications.

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit

Technical Information:

• Standard Conformity : IS/IEC 60898-1:2015
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40, 63 AMP
• Rated Breaking Capacity : 10000A (10 kA) 
• Rated Voltage (Un) : 240V AC
• Rated Frequency : 50 Hz 
• Dielectric Strength : 2000 V for 1 Minute 
• Rated Insulation Voltage (Ui) : 660 V 
• Rated Impulse Voltage (Uimp) : 4 kV 
• Energy Limiting Class : Class 3 
• Ambient Temperature(°C ) : -5°C to 55°C 
• Degree of Protection : IP20 
• Tripping Mechanism : Thermal and Magnetic 
• Type Mounting : Snap on DIN rail at (35mm x 7.5mm) 
• Connecting Terminals : 25mm²

Micron Features

• Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked.
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load and Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard
• Shock Proof: Finger and Hand touch safe.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make and Break trip free mechanism.
• Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection.
• Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance.
• Positive Isolation.
• Suitable for Residential and Commercial applications.