Post Buy Requirement
Prism Gas Detection Pvt. Ltd.
Mumbai, Maharashtra, India
gstGST : 27AAACP5821D1ZQ Verified Add Review

Other Products / Services

Sensor Gas Chromatograph

  • Frequency 50Hz
  • Warranty 2yrs
  • Ambient Temperature 0-100deg C
  • Application Industrial Use, laboratory Use
  • Dimensions 28*30*18 Cm
  • Output Signal 4-20mA
  • Accuracy +/-2%.

The company is one of the major Manufacturers and Suppliers of Sensor Gas Chromatograph in Mumbai. The Sensor Gas Chromatograph or SGC, offered by the company, makes use of the short columns and gas sensors to provide quick gas separation as well as super gas sensitivity. The Sensor Gas Chromatograph comes with standard software that can display the results promptly on the attached computers through chromatography charts and gas concentration display. As an optional feature the continuous measurement display is also available.

Highlights of Sensor Gas Chromatograph

  • Easy operation
  • Small size (B4 Size)
  • Super sensitivity
  • Accurate measurement of quite small amounts of gas
  • Extremely sensitive semiconductor gas sensor used as detector to measure PPB
  • Short time measurement
  • Measurement starts as soon as the sample gas is injected
  • Measurement completed automatically in 4 or 8 minutes
  • No carrier gas cylinder required
  • Uses ambient air as carrier gas (Note : Some models need the cylinder.)
  • Light weight and portable
  • Weight : 5.5 kg
  • Does not require a limited installation site
  • Original technology with a short length column
  • Continuous measurement through automatic gas injector possible by setting total measurement duration time or total measurement times (Optional Feature)


Applications Of Sensor Gas Chromatograph

  • Can be used to detect very small gas in various fields
  • Factory environment measurement
  • Environmental measurement inside and outside a factory
  • Malodor processing ability check
  • Garbage released odor control
  • Odor prevention in the neighborhood
  • Deodorizer performance evaluation
  • Performance and deterioration evaluation for deodorizers
  • Quality control and freshness check in food processing process
  • Very small amount gas analysis in R&D of environmental, medical, and micro-organism fields
  • Real time data viewing with attached software


Customization Options For Sensor Gas Chromatograph

  • With high purity air cylinder as carrier gas, if the ambient air around is polluted
  • Automatic gas injection and continuous measurement by automatic sampling function
  • For measuring other gases apart from the currently available gases


Download Detail File : Click Here
View Complete Details

Online Gas Detection System (FF-400N)

  • Type Gas Detection System
  • Material Aluminium, Plastic
  • Color Multi Colour
  • Voltage 0-12VDC
  • Finishing Polished
  • Power 100-200W
  • Feature Durable, Hard Structure, Industry Proven Design, Less Maintenance, Rust Proof

Features and Cost â Best Mix

  • First time  Remote Sensor Head
  • Design based on 25 yrs of experience
  • Very easy Maintenance
  • High-sensitivity Sensors
  • Very Long-life 5-10 years
  • Alarm at fraction of LEL/TLV
  • No false Alarm
  • Detectors can be placed upto 500 mtrs.
  • Two level Alarms WARN & ALARM
  • Continuous Sensor monitoring & Fault detection
  • WARN, ALARM, FAULT 3 LEDs/channel and PILOT
  • Compact Water-proof, Dust-tight enclosure
  • Battery back-up upto 4 hours
  • Universal Input Supply : 100 260 VAC , 50 60 Hz

Technical Data

Gases LPG / Propane CNG / Methane / LNG / PNG Hydrogen Carbon monoxide
Alarm Set-point
  • LPG / Propane : 5% and 25% LEL (1000 and 5000 ppm)
  • CNG / LNG / PNG / Methane Hydrogen : 5% and 25% LEL (2500 and 12500 ppm) 13% and 25% LEL (5200 & 10000 ppm)
  • Carbon monoxide : 100 and 300 ppm
Audio Buzzer 80 dB
Relay Contact Rating 1A @ 230V AC/24VDC
Power Univ. AC - 100-260VAC , 50-60 Hz
Controls & Indications ACK, RST, Battery In/Out
Battery back-up (optional) upto 4 hours
Env. Range 0 to 50oC, 0 to 95% Rh

Ordering Details

Monitor Channels 2 / 4 / 6 / >6
Detector Units Diffusion/Suction - FLP / NFLP Blind / 1 Alarm / Full Status
Local Relay Yes / No
Buzzer/Flasher Yes / No
Local / Remote Sensor Head (only for NFLP versions)
View Complete Details

Gas Leak Alarm Detector

  • Type Gas Leak Detector
  • Material ABS Plastic
  • Certification CE Certified
  • Color White
  • Feature Accuracy, Alarm System, Easy To Use
  • Application Gas Leakage Detecting
  • Display Type Digital
  • Power Source Battery
  • Warranty 1Year
  • Gas Type Combustible Gas

We are one of the leading Mnaufacturers and Suppliers of Gas Leak Alarm Detectors in Mumbai. The Gas Leak Alarm Detectors, offered by us, are detectors with an in-built display and alarm system. The KD-12 Series Gas Leak Alarm Detectors are known for their efficient performance and the numerous features of the product make it widely demanded.

Highlights Of Gas Leak Alarm Detector

  • Simpler, smarter and reliable gas detector with digital display
  • Simple and cost effective installation
  • Rugged, compact and lightweight design
  • Environmentally friendly product


Approvals For Gas Leak Alarm Detector

  • Ex d IIC T5 (KD â 12 A/B/C)
  • Ex d IIB T6 (KD-12 B/O)
  • CE Marking (EMC Directive)
  • ATEX Standard
  • China Fire Equipment Inspection (KD â 12B)


Features Of Gas Leak Alarm Detector

  • LED Display : Large and Easy-to-see display shows the gas concentration and alarm indication
  • Easy Maintenance : With a magnetic stick, zero and span adjustments can be done without any difficulty on site
  • Easy sensor replacement as the simple plug-in sensor module makes it easier
  • Rugged, compact and lightweight
  • Protection rating IP65 (Standard)
  • Size : W158 Ã H116 Ã D68 mm
  • Weight : 1.2 kg
  • Explosion Proof
  • KD-12A/B/C are desighed as Exdll CT5 for Hydrogen and Acetylene
  • Eco-friendly Design : Lead-free PC Board, electronics parts and solders RoHS regulation can be applied to KD-12A/B/C on requ
  • For Combustible, Toxic Gases and Oxygen Deficiency


Detects Gases From PPM To VOL% With

  • Hot wire Semiconductor Sensor
  • Thermal Conductivity Sensor
  • Galvanic Cell Sensor (Oxygen)
  • Catalytic Combustion Sensor
  • Electrochemical Sensor
View Complete Details

Toxic Gas Transmitter

  • Type Gas Transmitter
  • Material Cast Aluminum
  • Color Grey
  • Feature Accuracy, Alarm System, Durable, Easy To Use
  • Application Transmitter
  • Display Type Digital
  • Power Source Battery
  • Warranty 1Year
  • Gas Type Toxic Gas

We are one of the leading Manufacturers and Suppliers of Toxic Gas Transmitters in Mumbai. Toxic Gas Transmitter 1000D is a series of direct use sensor-transmitter combination units housed in weatherproof (IP65) enclosures. Alternately, Toxic Gas Transmitter is also available in FLP version suitable for hazardous areas (IIA/IIB). Toxic Gas Transmitters are designed for standard two wire operation where the output is supplied via the same wire pair as the power supply. The external circuit loop is connected to the Toxic Gas Transmitter through a screw terminal connector. The units are supplied pre-calibrated for the specified range, and the sensitivity of the device should not drift by more than 2% of full signal per month. Some sensors have cross interference effect of other gases. It is important to specify air composition to help choose appropriate sensor for the Toxic Gas Transmitter.

Features Of Toxic Gas Transmitter

  • Can be operated over a wide power supply range (Nominal 24 V DC)
  • Total loop resistance in external circuit depends upon the operating voltage
  • Maximum loop resistance includes measuring resistor at the remote receivers and any series meters for calibration
  • Sensors require just few seconds to settle after start-up
  • Some models (analog type) provided with potentiometers for routine span and zero adjustment
  • Except requiring periodic recalibration, transmitters are maintenance-free
  • Provide faultless service throughout the working life of the sensor
  • Circuit uses SMD and microcontroller based design to provide excellent linearity, accuracy and stability
  • Circuit imposes no constraints on the sensor
  • Performance characteristics of sensor are unaltered by addition of circuit board


Optional Enhancements For Toxic Gas Transmitter

  • 4 digit LCD display
  • Multi-parameter back lit LCD display
  • HART protocol output
  • Modbus protocol
  • PC calibration
  • Programming facility


Highlights

  • Very low maintenance
  • 4 digit LED display
  • Microcontroller SMD components
  • Weather proof dust tight IP 66 enclosure
  • Aesthetical looks
  • 2 wire 4-20 mA output
  • Compatible : DCS, PLC, PRISM Monitors
  • Loop powered wide OPTG voltage
  • High sensitivity sensor


Connections To Controller

  • Use Positive and Signal terminals of the controller
  • Controller must have a loop shunt resistor
  • Max. Loop resistance with 24 V supply is 500 ohms including cable resistance
  • Do not connect ´N ´terminal. This is for service personnel only

Specifications

Operating Voltage 15-30VDC
Operating Temperature 0 - 50 deg C
Power consumption < 2 W
Cable entry Cable diameter : 7 - 9 mm
Indications 3 digit LED display
Enclosure ABS, IP65 with transparent lid
Colour of box Light Gray similar to RAL 7035
Size (H x L x D)mm 80 x120 x 85
Weight < 1 Kg
Mounting Wall
Resolution 0.1%
Output linearity Linear over full range
Calibration Via Zero & Span pots
Expexcted Optg life 2 yrs.


Gases Range (ppm)
CO 2000, 5000, 10000
H2S 20,50,100
SO2 20,2000
NO2 20
NO 250,5000
Cl2 20
EtO 100
PH3 10
HCN 100
O2 25%v/v

View Complete Details

Odour Gas Chromatograph

  • Application Industrial Use, laboratory Use
  • Power Source Electrical
  • Temperature Zone 6
  • Dimensions 28*30*18 Cm
  • Heating Rate 0.1~120/min
  • Display Digital

The company is one of the leading Manufacturers and Suppliers of Odour Gas Chromatographs in Mumbai. The Odour Gas Chromatograph measures the volatile sulfide components or VSC in the breath and separate into halitosis components which are hydrogen sulfide, methyl mercaptans, and dimethyl sulfide. Known for their excellent quality and highly precise functioning, the Odour Gas Chromatograph is widely in demand. The Odour Gas Chromatograph is widely used in the breath odor diagnostics treatment. The Odour Gas Chromatograph also has a sophisticated graphical data management software that provides measurement of halitosis strength levels as well as the history of the patients.

Breath Sampling Procedure
The placement pattern of the Odour Gas Chromatograph is flexible enough to eliminate any worries regarding permanent installation. The following steps explain the breath sampling process :

  • Insert the syringe up to the stopper into the oral cavity.
  • Hold the syringe between the front teeth.
  • Tightly close the mouse.
  • Wait for 30-60 seconds so as to have enough oral gas.
  • Pull the plunger slowly push it in.
  • Pull the plunger out once again before the removal of the syringe from the mouth.
  • Wipe the top-most portion of the syringe with a tissue
  • Attach a supplied needle to the syringe.
  • Eject the remaining gas until it reaches the level of 0.5ml (CC) by pushing the plunge.
  • Inject the remainder into the inlet and the measurement automatically starts.
View Complete Details

Alcohol Sensor

We supply technically sound Breath Alcohol Detector that identifies the blood alcoholic content in seconds. Our Digital Breath Alcohol Detector is available under the brand name of BACTRACK breathalyzer. Digital Breath Alcohol Detector, offered by us, is designed with advanced technology and in an innovative and user friendly design. Salient features of our Digital Breath Alcohol Detector.
Sleek design
Simple
Accurate
Easy to use
Attractive design
Professional accuracy
Today, we have carved a niche as one of the key Electronic Breath Alcohol Detector Suppliers in India.
View Complete Details

Ammonia Detector

Catering to the varied demands of the customers, we ensure that the offered array of products is as per the exact customers' demand and need. We are a name synonymous to trust and quality, thus we make every attempt to bring forth only finest product range that is manufactured using premium quality range of products.
View Complete Details

Gas Alarms

With well-connected and substantial warehouse, we arrange the extensive range systematically to deal with urgent deliveries and orders. Our remarkably superior warehouse system helps us in keeping the range safe until the final send off. We ensure that the packing of the products remain intact and there will be zero damage while handling, warehousing and transit. For this, we make use of high quality packaging material.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Aditya K. (Prism Gas Detection Pvt. Ltd.)
  • 243, Oshiwara Industrial Centre New Link Road, Goregaon West, Mumbai, Maharashtra - 400104
  • Share us via
  • Call 08068499995 Ext. 912