Listing ID #62091
Company Information
Ask for more detail from the seller
Contact SupplierWe offer Online Gas Detection System. “the ultimate” gas sensor + transmitterunmatchable featuresflammable, toxic, oxygen, co24-20ma analog output or digital rs485 outputnon-intrusive magnetic calibration4-digit back-lit display & 5-mode status led sthree preset alarm thresholdsself-diagnostic procedureszero trackerdigital filteratex certified for group I and iitu1000 series is available for large no. Of gases – methane, lpg, gasoline, hydrogen, ethyl alcohol, methyl alcohol, ammonia, toluene, xylene, acetone, hexane, ethylene, acetylene, oxygen, co, h2s, so2, no2, cl2, hcl, etc.
tu1000 (the ultimate) transmitter
tu1000 series is the latest avatar of intelligent transmitters, ‘the ultimate’ gas sensor + transmitter with unmatchable features. It can detect either flammable or toxic vapours, oxygen enrichment or depletion or co2. It can provide 4-20 ma analog output and/or digital rs485 output. It can be interfaced with any standard process indicator or plc/dcs. It can be calibrated through non-intrusive magnetic device or through pc or through a hand-held unit (display version). It can provide three settable alarms, three relays, open collector outputs, and back-lit display – virtually anything you can ask from a transmitter.
tu1000d unit has a large transparent front window with a 4-digit back-lit display and 5-mode status leds providing 24/7 gas concentration reading and channel status.
tu1000 has a three-preset, software programmed, alarm thresholds corresponding to three leds indications. Further two leds provide visual indication of fault and power on. The tu1000 unit comes complete with a 1-relay output interface with an optional 3-relay or 2-open collector outputs, thus making it an ideal choice for large scale installations with varied applications.
Sensing element | PELLISTORS, Industrial grade Electrochemical Cells, INFRARED sensor |
---|---|
Measurement range | 0-100% LEL, ppm for toxic gases, %vol. for CO2 |
Power supply | 12- 24 Vdc +/- 15% |
Consumption at 12Vdc | 90 mA (nominal); 130 mA (max) |
Visual indications | Flashing LED (standard); 3 red LED for Alarm levels, yellow for Fault and green for Power supply (display version). |
Display characteristics (Display version only) | 4 digit, 7.5 mm high, 7 segment display |
Analog output | 4-20 mA (200 Ω) |
Serial Output (optional) | Serial RS-485 MODBUS protocol |
O/C or relay outputs (optional) | Open collectors or relay optional boards |
Precision | 1.5% full range or 10% reading |
Repeatability | +/- 5% full scale |
Warm-up time | 5 minutes |
Stabilization time | < 2 minutes |
Response time | < 15 sec. T50; < 25 sec. T90 (flammable gas with Pellistor) |
Storage temperature | -25 / + 60oC |
Operating temperature | -10 / + 60 oC (flammable gas version) |
Relative humidity | 20-90 % Rh / 40 o C |
IP rating | IP65 (Exd version); IP55 (Exn version) |
Operative pressure | 80-110 KPa |
Air velocity | < 6 mS -- check unit |
Weight | Exd : 900 gr. Blind Exn: 800 gr Blind Exd : 900 gr. Display Exn : 700 gr display |
Dimension | Exd : L.106, H. 160, D. 80 mm Exn : L.106, H. 180, D. 65 mm |
Orientation | The detector must be mounted with sensor head downward |
Reference Norms | EN60079-0 EN60079-1 EN60079-15 EN61241-0 EN61241-1 (Electrical Apparatus for Explosive Atmospheres). EN 61779-1/4 (Performance) |
Certificates | CESI 01ATEX053 (Exd version) CESI 03ATEX339 (Exn version) CESI 02ATEX084 (Exd + performance) CESI 04 ATEX106 (Group I) |
Note : Indications & Magnetic Programming Features are available with Display Version only. Some of the features are optional. |