RANDHIR Coated HASTELLOY X HEX NIPPLES, Size : 0-10cm, 10-20cm, 20-30cm, 30-40cm

Randhir Metal is one of the well-known stockiest and dealer of Hastelloy Alloy X Nipple, which is recommended for joining alloy by Gas Tungsten Arc or Gas Metal Arc welding. Coated electrodes of our Hastelloy X Hexagon Reducing Nipple are also available for Shielded Metal Arc welding in non – ASME code construction. For dissimilar metal joining of this Hastelloy X Hexagon Nipple to nickel, cobalt, or iron – base materials, welding products may all be considered, depending upon the particular case. Pre – heat in our Hastelloy X One End Threaded Nipple is not required, where pre – heat is generally specified as room temperature. Inter – pass temperature in these Hastelloy X Both End Threaded Nipple should be maintained below 200 Degree F (93 Degree C). Auxiliary cooling methods in our Hastelloy X Concentric HEX Nipple may be used between weld passes, as needed, providing that such methods do not introduce contaminants. Post – weld heat treatment is not generally required for this Hastelloy X Eccentric HEX Nipple, where bright annealed products are cooled in hydrogen. All greases, oils, cutting oils, crayon marks, machining solutions, corrosion products, paint, scale, dye penetrant solutions, and other foreign matter should be completely removed from our Alloy X Hexagon Reducing Nipple. All cold – reduced sheet and the various weld samples were produced from these Alloy X Hexagon Nipple which had been solution heat – treated prior to cold reduction or welding.