safety, design, engineering, manufacture, assembly, testing, erection & maintenance, based upon guidelines, specifications of

institution of lighting engineers (ile), uk, technical report # 7

ambica masts comply with all relevant specifications like

·         design, manufacture & performance as per is 875 & tr-7 capable to withstand external forces exerted by wind pressure at 180 km/h with 3 seconds gust, with min. load factor of 1.25 and material factor of 1.15 design life of mast is 25 years

·         single longitudinal weld as per is 7318 part-i & is 817 part-i

·         single hot dip galvanization min. 86 microns as is 2629/ tr 7 and an additional coat of aluminum paint as per clause 2.10.5 tr-7 for shielding the direct contact of zinc surfaces.

safety, design, engineering, manufacture, assembly, testing, erection & maintenance, based upon guidelines, specifications of

institution of lighting engineers (ile), uk, technical report # 7

ambica masts comply with all relevant specifications like

·         design, manufacture & performance as per is 875 & tr-7 capable to withstand external forces exerted by wind pressure at 180 km/h with 3 seconds gust, with min. load factor of 1.25 and material factor of 1.15 design life of mast is 25 years

·         single longitudinal weld as per is 7318 part-i & is 817 part-i

·         single hot dip galvanization min. 86 microns as is 2629/ tr 7 and an additional coat of aluminum paint as per clause 2.10.5 tr-7 for shielding the direct contact of zinc surfaces.