0.2mm FR4 ENEPIG PCB

What is enepig?enepig-electroless nickel electroless palladium immersion gold is a surface finish for printed circuit boards.enepig works well with lead free and conventional eutectic solder alloys.this is the best way for gold wire bonding. We can offer quick turn enepig pcb with low cost.0.2mm pcb will be ok.rigid(0.2mm),you should be very shocked.but we can make this. Pcb features: 1.layer: 22.material: fr43.thickness: 0.2mm4.copper: 1oz5.mini hole: 0.15mm6.mini width/space: 0.08mm/0.08mm7.finish: enepig our manufacturing capability:manufacture capability layers: 1-32 layersmaterials: cem1, cem3, teflon, rogers, fr-4, high tg fr-4, aluminum base, halogen freemax board size: 510*1200mmmaterial: rohs directive-compliantpcb thickness: 1.6mm-6.4mmout layer copper thickness: 1-6ozinner layer copper thickness: 1oz-12ozmax board thickness: 6.0mmminimum hole size: 0.150mmminimum line width/space: 3/3milmin s/m pitch: 0.1mm (4mil)plate thickness and aperture ratio: 12:1minimum hole copper: 20μmhole diameter tolerance (pth): ±0.075mm (3mil)hole diameter tolerance (npth): ±0.05mm (2mil)hole position deviation: ±0.05mm (2mil)outline tolerance: ±0.05mm (2mil)surface finish: hasl leadfree, immersion enig, chem tin, flash gold, osp, gold finger, peelable, immersion silver,enepigsolder mask: green/blue/red/black,purple,white,yellow,transparent legend: white/black/yellowoutline: rout and score/v-cut e-test: 100% top 10 reasons why you should buy pcbs.