Hydrocarbon Analyzer

Availability< 20 lb (9.07 kg)
RangesMDQ 0.003%, Full-scale 0.01 – 100% (Methane) MDQ 0.01ppm, Full-scale 1 – 200ppm (Methane) MDQ 0.1ppm, Full-scale 1 – 2,000ppm (Methane) MDQ 0.3ppm, Full-scale 1 – 20,000ppm (Methane)
Support GasHydrogen 35 cc/min, Air 175 cc/min (typical). Hydrocarbon content must be less than 1 ppm. Fuel blend options available, consult Baseline®
FeaturesFlame ionization detector, Internal, multipoint sampling option
Supply TypeManufacturer, Exporter, Supplier, Retailer, Distributor, Trader
Preferred Buyer Location All over the world

Company Information

Ask for more detail from the seller

Report incorrect details

Availability< 20 lb (9.07 kg)
SamplingInternal single or multipoint modules for pre-filtered (
DetectorFlame ionization detector (FID)
Dimensions19.00″ (48.3 cm) W x 14.25″ (36.2 cm) D x 5.25″ (13.3 cm) H
Repeatability±1% Full-scale response
CalibrationProgrammable automatic or manual calibration
FeaturesFlame ionization detector, Internal, multipoint sampling option
Operating Humidity0 – 95% (non-condensing)
ConfigurationBench-top or rack-mount 19″ (48.3cm) panel
RangesMDQ 0.003%, Full-scale 0.01 – 100% (Methane) MDQ 0.01ppm, Full-scale 1 – 200ppm (Methane) MDQ 0.1ppm, Full-scale 1 – 2,000ppm (Methane) MDQ 0.3ppm, Full-scale 1 – 20,000ppm (Methane)
ApplicationsCarbon bed breakthrough detection, Industrial hygiene & safety monitoring, LEL monitoring,
Drift±1% of Full-Scale over 24 hours
Operating Temperature32 to 104°F (0 to 40°C)
Response Time< 5 seconds to 90% of final reading
Support GasHydrogen 35 cc/min, Air 175 cc/min (typical). Hydrocarbon content must be less than 1 ppm. Fuel blend options available, consult Baseline®
AlarmsMultilevel concentration and fault alarms that result in audible and visual alarms. Alarms may also be mapped to relays to control external equipment.
Connections1/4″ (6.35 mm) tube fitting connectors